Development of a Structural Health Monitoring Tool for Underwater Concrete Structures
Publication: Journal of Construction Engineering and Management
Volume 147, Issue 10
Abstract
Limited studies have gathered information on structural health monitoring (SHM) of underwater structures, and most of those studies are outdated. The existing methods evaluated structural distresses separately, without accounting for the correlation between the distresses. This study developed a SHM tool which accounts for the reciprocal relationships and priority weights of different structural distresses, and assessed underwater structures using the developed structural health monitoring tool. A new rating method was developed using fuzzy analytic hierarchy process (FAHP) which incorporates visual inspections of surface distresses, nondestructive tests (NDTs), crack details, hydraulic conditions, and casual characteristics of the underwater structures. The SHM tool was applied to 12 underwater structures, including bridges, dams, canals, water tanks and quay walls. The results of NDTs such as rebound hammer tests and ultrasonic pulse velocity tests, crack surveys, and visual observations on underwater concrete structures are employed in the SHM tool and the structures were rated using priority weights allocated to different attributes. The SHM tool developed in this study supports enhanced efficiency and effectiveness of structural health monitoring of underwater structures and proposes a numerical framework which can be employed to rate and compare the structural health of different underwater concrete structures.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the study appear in the published article.
Acknowledgments
The authors express their gratitude to the Department of Civil Engineering, Faculty of Engineering, General Sir John Kotelawala Defence University for providing technical assistance throughout this study.
References
ACI (American Concrete Institute). 2008. Guide for conducting a visual inspection of concrete in service. ACI 201.1R-08. Farmington Hills, MI: ACI.
ACI (American Concrete Institute) Committee. 2008. Building code requirements for structural concrete and commentary. ACI 318 M-08. Detroit: ACI.
BIS (Bureau of Indian Standards). 2000. Indian standard code of practice for plain and reinforced concrete (fourth revision). IS 456. New Delhi, India: BIS.
Browne, T. M., T. J. Collins, M. J. Garlich, J. E. O’Leary, and K. C. Heringhaus. 2010. Underwater bridge repair, rehabilitation, and countermeasures. Washington, DC: Federal Highway Administration, USDOT.
BSI (British Standards Institution). 2000. Concrete: Specification, performance, production and conformity. BS EN 206-1. London: BSI.
BSI (British Standards Institution). 2006. Concrete—Part 1: Complementary British Standard to BS EN 206-Part 1: Method of specifying and guidance for the specifier. BS 8500. London: BS.
Buckley, J. J. 1985. “Fuzzy hierarchical analysis.” Fuzzy Sets Syst. 17 (3): 233–247. https://doi.org/10.1016/0165-0114(85)90090-9.
Champiri, M. D., S. H. Mousavizadegan, and F. Moodi. 2012. “A fuzzy classification system for evaluating the health condition of marine concrete structures.” J. Adv. Concr. Technol. 10 (3): 95–109. https://doi.org/10.3151/jact.10.95.
Chang, D.-Y. 1996. “Applications of the extent analysis method on fuzzy AHP.” Eur. J. Oper. Res. 95 (3): 649–655. https://doi.org/10.1016/0377-2217(95)00300-2.
Costa, A., and J. Appleton. 2002. “Case studies of concrete deterioration in a marine environment in Portugal.” Cem. Concr. Compos. 24 (1): 169–179. https://doi.org/10.1016/S0958-9465(01)00037-3.
Fernandez, R. P., and M. L. Pardo. 2013. “Offshore concrete structures.” Ocean Eng. 58: 304–316.
Fugler, M. D., R. R. Avent, and M. Alawady. 1995. “Systematic evaluation of structural deterioration in underwater bridge substructures.” Transp. Res. Rec. 1476 (1): 139.
Lagat, C., S. Higgins, and C. Otto. 2019. Degradation of subsea concrete structures. Perth, Australia: Curtin University.
Leeming, M. B. 1998. “3 Durability of concrete in and near the sea.” In Concrete in coastal structures, 73–98. London: Thomas Telford.
Mirzabeygi, M., M. Naji, N. Yousefi, M. Shams, H. Biglari, and A. H. Mahvi. 2016. “Evaluation of corrosion and scaling tendency indices in water distribution system: A case study of Torbat Heydariye, Iran.” Desalin. Water Treat. 57 (54): 25. https://doi.org/10.1080/19443994.2016.1162206.
Momber, A., and R. Kovacevic. 1994. “Fundamental investigations on concrete wear by high velocity water flow.” Wear 177 (1): 55–62. https://doi.org/10.1016/0043-1648(94)90117-1.
Popovics, S., and W. E. McDonald. 1989. Inspection of the engineering condition of underwater concrete structures. Philadelphia: Army Engineer Waterways Experiment Station Vicksburg Ms Structures Lab.
Poston, R. W., A. R. Whitlock, and K. E. Kesner. 1995. “Condition assessment using nondestructive evaluation.” Concr. Int. 17 (7): 36–42.
Pushpakumara, B. H. J., G. S. De Silva, and G. H. M. J. Subashi De Silva. 2012. “Evaluating mitigation methods for chloride induced corrosion of reinforced concrete structures.” In Proc., 3rd Int. Conf. on Sustainable Built Environment (ICSBE). Moratuwa, Sri Lanka: Univ. of Moratuwa.
Pushpakumara, B. H. J., S. De Silva, and G. H. M. J. De Silva. 2013. “Investigation on efficiency of repairing and retrofitting methods for chloride induced corrosion of reinforced concrete structures.” Eng. J. Inst. Eng. Sri Lanka 46 (4): 19–30. https://doi.org/10.4038/engineer.v46i4.6807.
Pushpakumara, B. H. J., S. De Silva, and G. H. M. J. Subashi De Silva. 2017. “Visual inspection and non-destructive tests-based rating method for concrete bridges.” Int. J. Struct. Eng. 8 (1): 74–91. https://doi.org/10.1504/IJSTRUCTE.2017.081672.
Pushpakumara, B. H. J., and G. A. Thusitha. 2021. “Development of a priority weight based green building rating model.” J. Archit. Eng. 27 (2): 04021008. https://doi.org/10.1061/(ASCE)AE.1943-5568.0000465.
Ramezanianpour, A. A., V. Shahhosseini, and F. Moodi. 2009. “A fuzzy expert system for diagnosis assessment of reinforced concrete bridge decks.” Comput. Concr. 6 (4): 281–303.
Saaty, T. L. 1988. “Mathematical models for decision support.” In What is the analytic hierarchy process? Berlin: Springer.
Santhanam, M., and M. Otieno. 2016. “Deterioration of concrete in the marine environment.” In Marine concrete structures, 137–149. Amsterdam, Netherlands: Woodhead.
Shekarchi, M., P. Ghods, R. Alizadeh, M. Chini, and M. Hoseini. 2008. “Durapgulf, a local service life model for the durability of concrete structures in the South of Iran.” Arabian J. Sci. Eng. 33 (1B): 77–88.
Standards Association of Australia. 2009. Concrete structures. AS 3600. North Sydney, NSW, Australia: Standards Association of Australia.
Thusitha, G. A., B. H. J. Pushpakumara, A. G. N. B. Dharmakeerthi, and A. H. Lakmal. 2019. Development of green building rating model for existing buildings. Colombo, Sri Lanka: Institution of Engineers Sri Lanka.
USACE. 1995. Engineering and design: Evaluation and repair of concrete structures. Engineer manual 1110-2-2002. Washington, DC: US Army Corps of Engineers.
Van Laarhoven, P. J., and W. Pedrycz. 1983. “A fuzzy extension of Saaty’s priority theory.” Fuzzy Sets Syst. 11 (1–3): 229–241.
Yehia, S., O. Abudayyeh, I. Fazal, and D. Randolph. 2008. “A decision support system for concrete bridge deck maintenance.” Adv. Eng. Softw. 39 (3): 202–210. https://doi.org/10.1016/j.advengsoft.2007.02.002.
Zadeh, L. A. 1988. “Fuzzy logic.” Computer 21 (4): 83–93. https://doi.org/10.1109/2.53.
Zhang, W., K. Sun, C. Lei, Y. Zhang, H. Li, and B. F. Spencer Jr. 2014. “Fuzzy analytic hierarchy process synthetic evaluation models for the health monitoring of shield tunnels.” Comput. Aided Civ. Infrastruct. Eng. 29 (9): 676–688. https://doi.org/10.1111/mice.12091.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Jan 5, 2021
Accepted: Jun 14, 2021
Published online: Aug 13, 2021
Published in print: Oct 1, 2021
Discussion open until: Jan 13, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- P. L. Devapura, B. H. J. Pushpakumara, Long-Term Performance of CFRP Bonded Steel Subjected to Marine and Temperature Exposure, Journal of Materials in Civil Engineering, 10.1061/JMCEE7.MTENG-15225, 35, 8, (2023).
- R. M. K. M. Rathnayake, B. H. J. Pushpakumara, Priority Weight-Based Systems to Predict Energy Consumption Behavior in Residential Buildings, Journal of Architectural Engineering, 10.1061/JAEIED.AEENG-1481, 29, 2, (2023).
- B.H.J. Pushpakumara, M.S.G.M. Fernando, Deterioration assessment model for splash zone of marine concrete structures, Case Studies in Construction Materials, 10.1016/j.cscm.2022.e01731, 18, (e01731), (2023).
- Haiyi Zhou, Pengcheng Jiao, Yingtien Lin, Emerging Deep-Sea Smart Composites: Advent, Performance, and Future Trends, Materials, 10.3390/ma15186469, 15, 18, (6469), (2022).
- B.H.J Pushpakumara, W.P.H.P. Weerasinghe, Evaluation of carbonation coefficient of reinforced concrete structures, Australian Journal of Civil Engineering, 10.1080/14488353.2022.2144003, (1-11), (2022).
- J.R. Lliso-Ferrando, I. Gasch, A. Martínez-Ibernón, M. Valcuende, Effect of macrocell currents on rebar corrosion in reinforced concrete structures exposed to a marine environment, Ocean Engineering, 10.1016/j.oceaneng.2022.111680, 257, (111680), (2022).
- Meisam Gordan, Saeed-Reza Sabbagh-Yazdi, Zubaidah Ismail, Khaled Ghaedi, Páraic Carroll, Daniel McCrum, Bijan Samali, State-of-the-art review on advancements of data mining in structural health monitoring, Measurement, 10.1016/j.measurement.2022.110939, 193, (110939), (2022).
- Jiajie Li, Zhenghong Tian, Xiao Sun, Yuanshan Ma, Hengrui Liu, Working state determination for concrete internal vibrator using genetic simulated annealing clustering method, Case Studies in Construction Materials, 10.1016/j.cscm.2022.e01163, 17, (e01163), (2022).