Influence of Lateral Movements of Approach Embankments on Bridges: A Case Study
This article has a reply.
VIEW THE REPLYThis article has a reply.
VIEW THE REPLYPublication: Journal of Performance of Constructed Facilities
Volume 36, Issue 4
Abstract
Several modes of bridge distress related to interactions with approach roadways have been observed in Oklahoma through routine maintenance inspections. Upon closer review it was found out that there are two main mechanisms for a category of distress that includes bearings tilting, anchor bolts bending or shearing, concrete slope walls cracking, and girders pushing against the backwall. One of these mechanisms is the lateral movement of approach embankments. This movement tends to happen early in the life of a bridge and pushes the abutment toward the bridge and closes the bridge expansion joints. The other mechanism is the pressure from rigid approach pavements due to closed or nonexisting joints on pavements. The pavement pressure exerted on the bridge deck also closes the expansion joints. This paper focuses on the lateral movements of approach embankments. As a part of this research an extensive instrumentation and monitoring program was undertaken on a five-span bridge in Ada, Oklahoma, showing the characteristic signs of this distress. Through review of routine inspection reports and analysis of recorded data from installed instruments; a rehabilitation plan was developed and implemented. Following the rehabilitation, the instruments were monitored for an additional 3.5 years to verify the repairs were successful. Through this research it was found that if lateral embankment movement is the mechanism of distress, a successful rehabilitation plan can be implemented once lateral movement has stopped. The rehabilitation involved installing new bridge expansion joints and changing some of the girder end conditions for the monitored bridge. As a result of this research the Oklahoma Department of Transportation expanded their bridge inspection protocol to identify these two mechanisms for this category of bridge distress.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or codes that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
The research reported in this paper was supported by ODOT and the FHWA under State Planning & Research (SP&R) Item No. 2228 and this support is gratefully acknowledged. The contents of this research reflect the views of the authors who are responsible for the facts and the accuracy of the data presented herein. The contents do not necessarily reflect the views of the ODOT or the FHWA. This paper does not constitute a standard, specification, or regulation. While trade names may be used or displayed in this paper, it is not intended as an endorsement of any machine, contractor, process, or product.
References
AASHTO. 2020. LRFD specifications for highway bridges. 9th ed. Washington, DC: AASHTO.
Aktan, A. E., F. N. Catbas, K. A. Grimmelsman, and M. Pervizpour. 2002. Development of a model health monitoring guide for major bridges. Washington, DC: Federal Highway Administration.
Bounds, T. D. 2020. “Lateral deformation of bridge embankments supported on soft soils.” Ph.D. dissertation, School of Civil Engineering and Environmental Science, Univ. of Oklahoma.
Burke, M. 2009. Integral and semi-integral bridges. New York: Wiley.
Chase, S. B. 2003. “Long term bridge monitoring to support bridge technology innovations.” In Proc., 19th US-Japan Bridge Engineering Workshop. Washington, DC: Federal Highway Administration.
Ellis, E. A., and S. M. Springman. 2001. “Full-height piled bridge abutments constructed on soft clay.” Géotechnique 51 (1): 3–14. https://doi.org/10.1680/geot.2001.51.1.3.
Geokon. 2019. Data sheet for model 4000 series, vibrating wire strain gauges. Lebanon, NH: Geokon.
Hannigan, P. J., F. Rausche, G. E. Likins, B. R. Robinson, and M. L. Becker. 2016. Design and construction of driven pile foundations workshop manual. Washington, DC: Federal Highway Administration.
Hong, W. P., and K. W. Lee. 2009. “Evaluation of lateral movement of piled bridge abutment undergoing lateral soil movement in soft ground.” Mar. Georesour. Geotechnol. 27 (3): 177–189. https://doi.org/10.1080/10641190802625692.
Leroueil, S., J. Magnan, and F. Tavenas. 1990. Embankments on soft clays. Chichester, UK: Ellis Horwood.
Muraleetharan, K. K., G. A. Miller, R. Floyd, B. Zhang, A. Taghavi, T. D. Bounds, and Z. Bright. 2018. Overturning forces at bridge abutments and the interaction of horizontal forces from adjacent roadways. Oklahoma City, OK: Oklahoma DOT.
Peck, R. B. 1969. “Deep excavation and tunneling in soft ground.” In Proc., 7th Int. Conf. on Soil Mechanics and Foundation Engineering, 225–290. London: International Society of Soil Mechanics and Foundation Engineering.
Poulos, H. G. 1972. “Difficulties in prediction of horizontal deformations of foundations.” J. Soil Mech. Found. Eng. 98 (8): 843–848. https://doi.org/10.1061/JSFEAQ.0001774.
Samtani, N. C., and E. A. Nowatzki. 2006. Soils and foundations: Reference manual. Washington, DC: Federal Highway Administration.
Silvestri, V. 1983. “The bearing capacity of dykes and fills founded on soft soils of limited thickness.” Can. Geotech. J. 20 (3): 428–436. https://doi.org/10.1139/t83-052.
Stermac, A. G., M. Devata, and K. G. Selby. 1968. “Unusual movements of abutments supported on end-bearing piles.” Can. Geotech. J. 5 (2): 69–79. https://doi.org/10.1139/t68-007.
Tavenas, F., C. Mieussens, and F. Bourges. 1979. “Lateral displacements in clay foundations under embankments.” Can. Geotech. J. 16 (3): 532–550. https://doi.org/10.1139/t79-059.
Tschebotarioff, G. P. 1973. Foundations: Retaining and earth structures. New York: McGraw-Hill.
Turan, A., T. Sangiuliano, M. S. Alam, M. Hesham, E. Naggar, M. Hesham El, M. Shahria Alam. 2013. “Lateral movements of a bridge abutment due to compressible foundation soils.” In Proc., 7th Int. Conf. on Case Histories in Geotechnical Engineering, 1–8. Rolla, MO: Missouri Univ. of Science and Technology.
William, G., S. Shourkry, and M. Riad. 2005. “Thermal stresses in steel girder bridges with integral abutments.” Bridge Struct. 1 (2): 103–119. https://doi.org/10.1080/15732480500125593.
Information & Authors
Information
Published In
Copyright
© 2022 American Society of Civil Engineers.
History
Received: Aug 19, 2021
Accepted: Mar 22, 2022
Published online: May 23, 2022
Published in print: Aug 1, 2022
Discussion open until: Oct 23, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Tommy D. Bounds, Kanthasamy K. Muraleetharan, Gerald A. Miller, Bo Zhang, Amirata Taghavi, Zachary Bright, Walter L. Peters, Royce W. Floyd, Jeffery Volz, Excessive Approach Pavement Pressure against Conventional Bridges, Journal of Performance of Constructed Facilities, 10.1061/JPCFEV.CFENG-4518, 38, 1, (2024).