Improvement in Blast Performance of RC Panels Using Innovative Sacrificial System Consisting of Hollow Metallic Tubes
Publication: Journal of Performance of Constructed Facilities
Volume 36, Issue 4
Abstract
An innovative sacrificial system consisting of hollow metal tubes as the energy-absorbing core was analyzed through three-dimensional (3D) finite-element analysis. The Johnson-Cook (J-C) plasticity model along with the J-C failure criterion were incorporated to model metallic parts under high-strain-rate loading, whereas the concrete damage plasticity (CDP) model was used to predict the behavior of concrete. Dynamic increase factors (DIFs) were used for concrete to understand the effect of high-strain-rate conditions. Finally, blast resistance performance of a square RC panel with dimension and thickness equals to 1,250 and 225 mm, respectively, with or without an innovative sacrificial system was analyzed under blast loading. From numerical simulation results, it is observed that sacrificial systems with thin sections of hollow metallic tubes performed better than thick sections irrespective of the same weight of the sacrificial system. Further, discussion was reported for the energy-dissipation curve of the system, and it is useful in defining the efficiency of the sacrificial system under blast loading.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the study appear in the published article.
References
Abada, M., A. Ibrahim, and S. J. Jung. 2021. “Improving blast performance of reinforced concrete panels using sacrificial cladding with hybrid-multi cell tubes.” Modelling 2 (1): 149–165. https://doi.org/10.3390/modelling2010008.
ABAQUS/Explicit. 2013. User’s manual. Vélizy-Villacoublay, France: Dassault Systemes Simulia Corporation.
Ahmed, S., and K. Galal. 2017. “Effectiveness of FRP sandwich panels for blast resistance.” Compos. Struct. 163 (Mar): 454–464. https://doi.org/10.1016/j.compstruct.2016.11.066.
Blanc, L., T. Schunck, and D. Eckenfels. 2021. “Sacrificial cladding with brittle materials for blast protection.” Materials 14 (14): 3980. https://doi.org/10.3390/ma14143980.
Cadoni, E., and D. Forni. 2015. “Strain rate effects on reinforcing steels in tension.” In Vol. 94 of Proc., EPJ Web Conf., 1–5. Les Ulis, France: EDP Sciences.
Choudhary, N. S., M. D. Goel, and S. Panchal. 2021. “Numerical analysis of innovative sacrificial protection system under blast loading.” Pract. Period. Struct. Des. Constr. 27 (1): 04021075. https://doi.org/10.1061/(ASCE)SC.1943-5576.0000655.
Codina, R., D. Ambrosini, and F. de Bordon. 2017. “New sacrificial cladding system for the reduction of blast damage in reinforced concrete structures.” Int. J. Prot. Struct. 8 (2): 221–236. https://doi.org/10.1177/2041419617701571.
Cranz, C. 1926. Lehrbuch der Ballistik. Berlin: Springer.
Goel, M. D., T. Chakraborty, and V. A. Matsagar. 2012a. “Dynamic response of steel-sand composite stiffened plates under impulsive loading.” J. Battlefield Technol. 15 (3): 1–7. https://doi.org/10.1007/978-81-322-0757-3_52.
Goel, M. D., N. S. Choudhary, and S. Panchal. 2020. “Resilient sacrificial protection system for concrete slab under blast loading.” Indian Concr. J. 94 (10): 31–43.
Goel, M. D., and V. A. Matsagar. 2013. “Blast-resistant design of structures.” Pract. Period. Struct. Des. Constr. 19 (2): 1–9. https://doi.org/10.1061/(ASCE)SC.1943-5576.0000188.
Goel, M. D., V. A. Matsagar, and A. K. Gupta. 2011. “Dynamic response of stiffened plates under air blast.” Int. J. Prot. Struct. 2 (1): 139–155. https://doi.org/10.1260/2041-4196.2.1.139.
Goel, M. D., V. A. Matsagar, A. K. Gupta, and S. Marburg. 2012b. “An abridged review of blast wave parameters.” Defence Sci. J. 62 (5): 300–306. https://doi.org/10.14429/dsj.62.1149.
Goel, M. D., V. A. Matsagar, S. Marburg, and A. K. Gupta. 2013. “Comparative performance of stiffened sandwich foam panels under impulsive loading.” J. Perform. Constr. Facil. 27 (5): 540–549. https://doi.org/10.1061/(ASCE)CF.1943-5509.0000340.
Guruprasad, S., and A. Mukherjee. 2000. “Layered sacrificial claddings under blast loading. Part II—Experimental studies.” Int. J. Impact Eng. 24 (9): 975–984. https://doi.org/10.1016/S0734-743X(00)00005-1.
Hanssen, A. G., L. Enstock, and M. Langseth. 2002. “Close-range blast loading of aluminium foam panels.” Int. J. Impact Eng. 27 (6): 593–618. https://doi.org/10.1016/S0734-743X(01)00155-5.
Hopkinson, B. 1915. British ordnance board minutes. 13565 ed. Kew, UK: National Archives.
Imbalzano, G., S. Linforth, T. D. Ngo, and P. V. S. Lee. 2017. “Blast resistance of auxetic and honeycomb sandwich panels: Comparisons and parametric designs.” Comp. Struct. 183 (Jan): 242–261. https://doi.org/10.1016/j.compstruct.2017.03.018.
Iqbal, M. A., K. Senthil, P. Bhargava, and N. K. Gupta. 2015. “The characterization and ballistic evaluation of mild steel.” Int. J. Impact Eng. 78 (Apr): 98–113. https://doi.org/10.1016/j.ijimpeng.2014.12.006.
Johnson, G. R., and W. H. Cook. 1983. “A computational constitutive model and data for metals subjected to large strain, high strain rates and high pressures.” In Proc., 7th Inf. Symp. Ballistics, 541–547. Hague, Netherlands: Royal Institution of Engineers in the Netherlands (KIvI), Division for Military Engineering in co-operation with the American Defense Preparedness Association.
Johnson, G. T., and W. H. Cook. 1985. “Fracture charactersistics of three metals subjected to various strains, strain rates, temperatures and pressures.” Eng. Fract. Mech. 21 (1): 31–48. https://doi.org/10.1016/0013-7944(85)90052-9.
Langdon, G. S., D. Karagiozova, M. D. Theobald, G. N. Nurick, G. Lu, and R. P. Merret. 2010. “Fracture of aluminium foam core sacrificial cladding subjected to air-blast loading.” Int. J. Impact Eng. 37 (6): 638–651. https://doi.org/10.1016/j.ijimpeng.2009.07.006.
Lee, J., and G. L. Fenves. 1998. “Plastic-damage model for cyclic loading of concrete structures.” J. Eng. Mech. 124 (8): 892–900. https://doi.org/10.1061/(ASCE)0733-9399(1998)124:8(892).
Neuberger, A., S. Peles, and D. Rittel. 2007. “Scaling the response of circular plates subjected to large and close-range spherical explosions. Part I : Air-blast loading.” Int. J. Impact Eng. 34 (5): 859–873. https://doi.org/10.1016/j.ijimpeng.2006.04.001.
Ousji, H., B. Belkassem, M. A. Louar, B. Reymen, L. Pyl, and J. Vantomme. 2016. “Experimental study of the effectiveness of sacrificial cladding using polymeric foams as crushable core with a simply supported steel beam.” Adv. Civ. Eng. 2016 (Sep): 1–13. https://doi.org/10.1155/2016/8301517.
Paepegem, W. V., S. Palanivelu, J. Degrieck, J. Vantomme, B. Reymen, D. Kakogiannis, D. V. Hemelrijck, and J. Wastiels. 2014. “Blast performance of sacrificial cladding with composite tubes for protection of civil engineering structures.” Composites, Part B 65 (Oct): 131–146. https://doi.org/10.1016/j.compositesb.2014.02.004.
Park, J. Y., E. Jo, M. S. Kim, S. J. Lee, and Y. H. Lee. 2016. “Dynamic behavior of a steel plate subjected to blast loading.” Trans. Can. Soc. Mech. Eng. 40 (4): 575–583. https://doi.org/10.1139/tcsme-2016-0045.
Rabbat, B. G., and H. G. Russel. 1985. “Friction coefficient of steel on concrete or grout.” J. Struct. Eng. 111 (3): 505–515. https://doi.org/10.1061/(ASCE)0733-9445(1985)111:3(505).
Theobald, M. D., G. S. Langdon, G. N. Nurick, S. Pillay, A. Heyns, and R. P. Merret. 2010. “Large inelastic response of unbonded metallic foam and honeycomb core sandwich panels to blast loading.” Compos. Struct. 92 (10): 2465–2475. https://doi.org/10.1016/j.compstruct.2010.03.002.
Yuen, S. C. K., G. N. Nurick, and H. L. Witbeen. 2011. “The response of sandwich panels made of thin walled tubes subjected to axial load.” Int. J. Prot. Struct. 2 (4): 477–498. https://doi.org/10.1260/2041-4196.2.4.477.
Information & Authors
Information
Published In
Copyright
© 2022 American Society of Civil Engineers.
History
Received: Oct 9, 2021
Accepted: Jan 21, 2022
Published online: Apr 27, 2022
Published in print: Aug 1, 2022
Discussion open until: Sep 27, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.