Equivalent Stress Equation for Unsaturated Soils. I: Equivalent Stress
This article is a reply.
VIEW THE ORIGINAL ARTICLEThis article has a reply.
VIEW THE REPLYPublication: International Journal of Geomechanics
Volume 8, Issue 5
Abstract
In 1959 Bishop stated his effective stress equation for unsaturated soils. However, the difficulties in estimating the value of its main parameter , made this equation useless and it was abandoned for some time. Only recently, it has been recognized that the use of Bishop’s stress equation can lead to simpler and more realistic constitutive models for unsaturated soils. However, up to now the most successful equations to quantify the value of parameter are empirical and not satisfactory for most soils. Based on the analysis of the equilibrium of the solid particles of a soil showing a bimodal structure and subject to certain suction, it was possible to establish an analytical expression for Bishop’s parameter . The resulting stress has been called equivalent stress (in contrast with effective stress) and can be used to predict the shear strength of unsaturated soils. The equivalent stress is written as a function of the net stress and suction and requires two parameters: the saturated fraction and the degree of saturation of the unsaturated fraction of the soil. This equivalent stress clarifies some features of the strength of unsaturated soils that up to now had no apparent explanation. However, the determination of its two parameters cannot be made from current experimental procedures. A method for the determination of these parameters and a comparison between experimental and theoretical results for the shear strength of unsaturated soils are presented in a companion paper.
Get full access to this article
View all available purchase options and get full access to this article.
References
Alonso, E. E., Gens, A., and Josa, A. (1990). “A constitutive model for partially saturated soils.” Geotechnique, 40(3), 405–430.
Aitchison, G. D. (1960). “Relationships of moisture stress functions in unsaturated soils.” Proc., Conf. on Pore Pressures, Institution of Civil Engineering, Buttherworths, London.
Allam, M. M., and Sridharan, A. (1981). “Effect of wetting and drying on shear strength.” J. Geotech. Engrg. Div., 107(4), 421–438.
Biot, M. A. (1955). “Theory of elasticity and consolidation for a porous anisotropic solid.” J. Appl. Phys., 26, 182–185.
Bishop, A. W. (1959). “The principle of effective stress.” Tek. Ukeblad, 39, 859–863.
Bishop, A. W., and Blight, G. E. (1963). “Some aspects of effective stress in saturated and partly saturated soils.” Geotechnique, 13(3), 177–197.
Bishop, A. W., and Donald, I. B. (1961). “The experimental study of partly saturated soil in the triaxial apparatus.” Proc., 5th Int. Conf. on Soil Mechanics and Foundation Engineering, International Society for Soil Mechanics and Foundation Engineering, Paris, 13–21.
Croney, D., Coleman, J. D., and Black, W. P. M. (1958). “Movement and distribution of water in soil in relation to highway design and performance.” Highway Research Board Special Rep. 40, Highway Research Board, Washington, D.C.
Desai, C. S., and Wang, Z. (2003). “Disturbed state model for porous saturated materials.” Int. J. Geomech., 3(3–4), 260–265.
Escario, V., Jucá, J. F. T., and Coppe, M. S. (1989). “Strength and deformation of partly saturated soils.” Proc., 12th Int. Conf. on Soil Mechanics and Foundation Engineering, International Society for Soil Mechanics and Foundation Engineering, Riode Janeiro, 43–49.
Gallipoli, D., Gens, A., Sharma, R., and Vaunat, J. (2003). “An elastoplastic model for unsaturated soil incorporating the effects of suction and degree of saturation on mechanical behavior.” Geotechnique, 53(1), 123–135.
Gan, J. K., and Fredlund, D. G. (1996). “Shear strength characteristics of two saprolitic soils.” Can. Geotech. J., 25(3), 500–510.
Garven, E. A., and Vanapalli, S. K. (2006). “Evaluation of empirical procedures for predicting the shear strength of unsaturated soils.” Proc., 5th Int. Congress on Unsaturated Soil Mechanics, ASCE, Reston, Va.
Haines, W. B. (1925). “A note on the cohesion developed by capillary forces in an ideal soil.” J. Agric. Sci., 15, 529–535.
Haines, W. B. (1929). “The hysteresis effect in capillary properties and the mode of moisture distribution associated therewith.” J. Agric. Sci., 20, 7.
Jennings, J. E. B. (1957). “Discussion on M. S. Youssef’s paper.” Proc. 4th Int. Conf. on Soil Mechanics, International Society for Soil Mechanics and Foundation Engineering, 168.
Jennings, J. E. B., and Burland, J. B. (1962). “Limitations to the use of effective stress in partly saturated soils.” Geotechnique, 12(2), 125–144.
Khalili, N., and Khabbaz, M. H. (1998). “A unique relationship for for the determination of the shear strength of unsaturated soils.” Geotechnique, 48(5), 681–687.
Lade, P. V., and De Boer, R. (1997). “The concept of effective stress for soil, concrete and rock.” Geotechnique, 47(1), 61–78.
Matyas, E. L., and Radhakrishna, H. S. (1968). “Volume change characteristics of partially saturated soils.” Geotechnique, 18(4), 432–448.
Murray, E. J. (2002). “An equation of state for unsaturated soils.” Can. Geotech. J., 39(1), 125–140.
Nishimura, T., Hirabayashi, Y., Fredlund, D. G., and Gan, J. (1999). “Influence of stress history on the strength parameters of an unsaturated statically compacted soil.” Can. Geotech. J., 36(2), 251–261.
Öberg, A.-L. (1995). “Stability of sand and silt slopes.” Internal Rep., Dept. of Geotechnical Engineering, Chalmers Univ. of Technology, Gothenburg, Sweden.
Öberg, A.-L., and Sällfors, G. (1995). “A rational approach to the determination of the shear strength parameters of unsaturated soils.” Proc., 1st Int. Conf. on Unsaturated Soils, Vol. 1, Paris, E. E. Alonso and P. Delage, eds., Balkema, Rotterdam, The Netherlands, 151–158.
Sheng, D., Sloan, D. G., and Gens, A. (2004). “A constitutive model for unsaturated soils: thermomechanical and computational aspects.” Comput. Mech., 33(6), 453–465.
Sivakumar, V., and Wheeler, S. J. (2000). “Influence of compaction procedure on the mechanical behavior of an unsaturated compacted clay (Parts 1 and 2).” Geotechnique, 50(4), 359–376.
Skempton, A. W. (1960). “Terzaghi’s discovery of effective stress.” From theory to practice in soil mechanics, Wiley, New York.
Sridharan, A., Altschaeffl, A. G., and Diamond, S. (1971). “Pore size distributions studies.” J. Soil Mech. and Found. Div., 97(5), 771–787.
Tamagnini, R. (2004). “An extended Cam-clay model for unsaturated soils with hydraulic hysteresis.” Geotechnique, 54(3), 223–228.
Terzaghi, K. (1936). “The shearing resistance of saturated soils and the angle between the planes of shear.” Proc., 1st Int. Conf. on Soil Mechanics, International Society for Soil Mechanics and Foundation Engineering, 54–56.
Vanapalli, S. K., Fredlund, D. E., Pufahl, D. E., and Clifton, A. W. (1996). “Model for the prediction of shear strength with respect to soil suction.” Can. Geotech. J., 33(3), 379–392.
Wheeler, S. J., Sharma, R. S., and Buisson, M. S. R. (2003). “Coupling hydraulic hysteresis and stress–strain behavior in unsaturated soils.” Geotechnique, 53(1), 41–54.
Information & Authors
Information
Published In
International Journal of Geomechanics
Volume 8 • Issue 5 • September 2008
Pages: 285 - 290
Copyright
© 2008 ASCE.
History
Received: Oct 9, 2006
Accepted: Mar 7, 2008
Published online: Sep 1, 2008
Published in print: Sep 2008
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.