CPT-Based Method for the Installation of Suction Caissons in Sand
This article has a reply.
VIEW THE REPLYPublication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 135, Issue 1
Abstract
A CPT-based method is presented for estimating the self-weight penetration and suction required during the installation of suction caissons in medium dense to dense sand. Existing methods, although fundamental in nature, suffer from the difficulty in estimating key input parameters such as an appropriate bearing factor for the tip resistance and frictional coefficients for skirt friction. Instead, the proposed method is based directly on the cone resistance profile, starting with the Det norske Veritas approach for calculating the installation resistance of skirted foundations. The approach is modified to include a simple linear reduction in end bearing on the skirt tips and internal friction with the level of suction, with those components of resistance assumed to reduce to zero once the suction reaches the critical level corresponding to hydraulic failure of the soil plug. The method is coupled with a seepage model so that, for a given pumping rate, the penetration and corresponding resistance can both be expressed as a function of time. Results of calculations with this complete model are shown to compare well with data from centrifuge model tests and with published data from suction caisson installations.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This work is part of the research program conducted at the Centre for Offshore Foundation Systems (COFS) at the University of Western Australia, established under the Australian Research Council’s Research Centres Program. The first writer holds an International Postgraduate Research Scholarship and a scholarship sponsored by Fugro.
References
American Petroleum Institute (API). (2000). Recommended practice 2A-WSD: Recommended practice for planning, designing and constructing fixed offshore platforms—Working stress design, 21st Ed., American Petroleum Institute, Washington, D.C.
American Petroleum Institute (API). (2007). Errata and supplement 3 to recommended practice 2A-WSD: Recommended practice for planning, designing and constructing fixed offshore platforms—Working stress design, 21st Ed., American Petroleum Institute, Washington, D.C.
Andersen, K. H., Jostad, H. P., and Dyvik, R. (2008). “Penetration resistance of offshore skirted foundations and anchors in dense sand.” J. Geotech. Geoenviron. Eng., 134(1), 106–116.
Barbour, R. J., and Erbrich, C. T. (1995). “Analysis of soil-skirt interaction during installation of bucket foundations using ABAQUS.” Proc., Int. ABAQUS Users Conf.
Bolton, M. D., et al. (1999). “Centrifuge cone penetration tests in sand.” Geotechnique, 49, 543–552.
Brown, G., and Nacci, V. (1971). “Performance of hydrostatic anchors in granular soils.” Proc., Offshore Technology Conference, OTC 1472, 533–542.
Bruggeman, G. A. (1999). Analytical solutions of geohydrological problems, Elsevier, New York.
Bye, A., Erbrich, C. T., Rognlier, B., and Tjelta, T. I. (1995). “Geotechnical design of bucket foundations.” Proc., Offshore Technology Conf., OTC 7793, 27th Ed., 869–883.
Clausen, C. J. F., and Tjelta, T. I. (1996). “Offshore platforms supported by bucket foundation.” Proc., 5th IABSE, 819–829.
Det Norske Veritas (DnV). (1992). Foundations, classification notes No. 30.4, Det Norske Veritas, Hovik, Norway.
Erbrich, C. T., and Tjelta, T. I. (1999). “Installation of bucket foundations and suction caissons in sand—Geotechnical performance.” Proc., Offshore Technology Conf., OTC 10990, 31st Ed., 725–735.
Feld, T. (2001). “Suction buckets, a new innovative foundation concept, applied to offshore wind turbines.” Aalborg Univ., Aalborg.
Fugro Engineers. (2004). “Axial pile capacity design method for offshore driven piles in sand.” Furgo Rep.
Guttormsen, T. R., Eklund, T., and Sparrevik, P. (1997). “Installation and retrieval of suction anchors.” Mooring and anchoring, IBC, Aberdeen.
Hogervorst, J. R. (1980). “Field trials with large diameter suction piles.” Proc., Offshore Technology Conf., OTC 3817, 12th Ed., 217–224.
Houlsby, G. T., and Byrne, B. W. (2005). “Calculation procedures for installation of suction caissons in sand.” Geotech. Eng., 158, 135–144.
Jardine, R. J., Chow, F. C., Overy, R., and Standing, J. (2005). “ICP design methods for driven piles in sands and clays.” Thomas Telford, London.
Lacasse, S. (1999). “Ninth OTRC honors lecture: Geotechnical contributions to offshore development.” Proc., Offshore Technology Conf., OTC 10822, 31st Ed.
Lehane, B. A., Schneider, J. A., and Xu, X. (2005). “The UWA-05 method for prediction of axial capacity of driven piles in sand.” Frontiers in offshore geotechnics: ISFOG 2005, Taylor and Francis Group, London.
Lunne, T., Robertson, P., and Powell, J. (1997). Cone penetration testing in geotechnical practice, Blackie Academic, London.
Martin, C. M. (2003). “New software for rigorous bearing capacity calculations.” Proc., Int. Symp. on Foundations: Innovations, Observations, Design and Practice, 581–591.
Noordzeeloket (2007). http://www.noordzeeloket.nl/activiteiten/windenergie/initiatieven (Nov. 25, 2007).
Randolph, M. F., Jamiolkowski, M. B., and Zdravković, L. (2004). “Load carrying capacity of foundations.” Proc., Skempton Memorial Conf., 207–240.
Sahota, B., and Wilson, Q. (1982). “The breakout behavior of a suction anchor embedded in submerged sand.” Proc., Offshore Technology Conf., OTC 4175, 117–132.
Schofield, A. N. (1980). “Cambridge geotechnical centrifuge operations.” Geotechnique, 30, 227–268.
Senders, M. (2008). “Suction caissons in sand beneath a tripod as foundation for offshore wind turbines.” Ph.D. thesis, School of Civil and Resource Engineering, Univ. of Western Australia.
Senders, M., Gaudin, C., and Randolph, M. F. (2006). “Centrifuge test set up for installation and cyclic loading of suction caissons in sand.” Proc., Int. Conf. on Physical Modelling in Geotechnics, 679–684.
Tjelta, T. I. (1994). “Geotechnical aspects of bucket foundations replacing piles for Europipe 16/11-E project.” Proc., Offshore Technology Conf., OTC 7379, 26th Ed., 73–82.
Tjelta, T. I. (1995). “Geotechnical experience from the Installation of the Europipe jacket with bucket foundations.” Proc., Offshore Technology Conf., OTC 7795, 27th Ed., 897–908.
Tjelta, T. I., Guttormsen, T. R., and Hermstad, J. (1986). “Large scale penetration test at a deepwater site.” Proc., Offshore Technology Conf., OTC 5103, 18th Ed., 201–212.
Tran, M. N. (2005). “Installation of suction caissons in dense sand and the influence of silt and cemented layers.” Ph.D. thesis, Dept. of Civil Engineering, Univ. of Sydney.
Tran, M. N., and Randolph, M. F. (2008). “Variation of suction pressure during caisson installation in sand.” Geotechnique, 58(1), 1–11.
Tran, M. N., Randolph, M. F., and Airey, D. W. (2005). “Study of seepage flow and plug loosening in installation of suction caissons in sand.” Proc., 15th Int. Offshore and Polar Engineering Conf., Vol. 2, Seoul, 516–521.
Xu, X., Schneider, J. A., and Lehane, B. M. (2005). “Evaluation of end-bearing capacity of open-ended piles driven in sand from CPT data.” Proc., Frontiers in Offshore Geotechnics: ISFOG 2005, Taylor and Francis Group, London, 725–731.
Information & Authors
Information
Published In
Copyright
© 2009 ASCE.
History
Received: Mar 20, 2007
Accepted: May 28, 2008
Published online: Jan 1, 2009
Published in print: Jan 2009
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.