End Bearing Capacity of Drilled Shafts in Rock
This article has a reply.
VIEW THE REPLYPublication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 125, Issue 12
![First page of PDF](/cms/10.1061/(ASCE)1090-0241(1999)125:12(1106)/asset/26649cd6-3bbe-47ac-b57f-5d862c4ea6b3/assets/(asce)1090-0241(1999)125:12(1106).fp.png)
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Bell, A. L. (1915). “Lateral pressure and resistance of clay, and the supporting power of clay foundations.” Minutes of Proc. of Instn. of Civ. Engrs., 199(Jan. 12), 233–336.
2.
Carter, J. P., and Kulhawy, F. H. (1988). “Analysis and design of drilled shaft foundations socketed into rock.” Rep. EL-5918, Electric Power Research Institute, Palo Alto, Calif.
3.
Davis, E. H. (1980). “A note on some plasticity solutions relevant to the bearing capacity of brittle and fissured materials.” Proc., Int. Conf. on Struct. Found. on Rock, Vol. 2, 83–90.
4.
Hirany, A., and Kulhawy, F. H. ( 1989). “Interpretation of load tests on drilled shafts, part 1: Axial compression.” Foundation engineering: Current principles and practices (GSP 22), F. H. Kulhawy, ed., ASCE, New York, 1011–1025.
5.
Hoek, E. (1994). “Strength of rock and rock masses.” ISRM News J., 2(2), 4–16.
6.
Hoek, E., and Brown, E. T. (1997). “Practical estimates of rock mass strength.” Int. J. Rock Mech. Min. Sci., 34(8), 1165–1186.
7.
Kulhawy, F. H. ( 1991). “Drilled shaft foundations.” Foundation engineering handbook, 2nd Ed., H.-Y. Fang, ed., Van Nostrand Reinhold, New York, 537–552.
8.
Kulhawy, F. H., and Carter, J. P. ( 1992). “Settlement and bearing capacity of foundations on rock masses” and “Socketed foundations in rock masses.” Engineering in rock masses, F. G. Bell, ed., Butterworth-Heinemann, Oxford, U.K., 231–245, 509–529.
9.
Kulhawy, F. H., Roth, M. J. S., and Grigoriu, M. D. (1991). “Some statistical evaluations of geotechnical properties.” Proc., 6th Int. Conf. Applic. Statistics and Probability in Civ. Engrg., Vol. 2, L. Esteva and S. E. Ruiz, eds., 705–712.
10.
Sowers, G. F. (1979). Introductory soil mechanics and foundations: Geotechnical engineering, 4th Ed., MacMillan, New York.
11.
Terzaghi, K. (1943). Theoretical soil mechanics. Wiley, New York.
12.
Vesic, A. S. ( 1975). “Bearing capacity of shallow foundations.” Foundation engineering handbook, H. F. Winterkorn and H.-Y. Fang, eds., Van Nostrand Reinhold, New York, 121–147.
13.
Einstein, H. H., Steiner, W., and Baecher, G. B. (1979). “Assessment of empirical design methods for tunnels in rock.” Proc., 4th Rapid Excavation and Tunnelling Conf.
14.
Leung, C. F. (1996). “Case studies of rock-socketed piles.” Geotech. Engrg., Southeast Asian Geotechnical Society, 27(1), 51–67.
15.
Prandtl, L. (1920). Über die Härte plastischer Körper. Nachrichten der Gesellschaft der Wissenschaften, Göttingen.
16.
Zhang, L. ( 1999). “Analysis and design of drilled shafts in rock,” PhD thesis, MIT, Cambridge, Mass.
Information & Authors
Information
Published In
History
Published online: Dec 1, 1999
Published in print: Dec 1999
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.