Simplified Method of Lateral Distribution of Live Load Moment
This article has a reply.
VIEW THE REPLYThis article has a reply.
VIEW THE REPLYPublication: Journal of Bridge Engineering
Volume 9, Issue 4
Abstract
This paper introduces a simplified method, known as Henry’s method, for the calculation of distribution factors of the live load moment. Using the simplified method, the live load effects are equally distributed in all beams, including interior and exterior beams. This method has been used in Tennessee for nearly four decades. It offers advantages in simplicity of calculation and flexibility in application. To carefully examine the simplified method, 24 actual bridges of six different types of superstructures were selected for the study. The distribution factors of actual bridges using Henry’s method were compared with the ones from the AASHTO LRFD, the AASHTO standard, and finite-element analysis. In the comparison study, the effects of bridge superstructure types and key parameters that significantly affected the calculation of distribution factors are discussed. Based on the results of the comparison and evaluation, a modified Henry’s method was proposed by introducing modification factors to Henry’s method. With proper modification, the simplified method can be used to determine reasonable and reliable distribution factors of the live load moment.
Get full access to this article
View all available purchase options and get full access to this article.
References
American Association of State Highway and Transportation Officials (AASHTO). (1996). “AASHTO standard specifications for highway bridges.” 16th Ed., Washington, D.C.
American Association of State Highway and Transportation Officials (AASHTO). (1998). “AASHTO LRFD bridge design specifications.” 2nd Ed., Washington, D.C.
Bakht, B., and Jaeger, L. G. (1985). Bridge analysis simplified, McGraw-Hill, New York.
Bishara, A. G., Liu, M. C., and El-Ali, N. D. ( 1993 ). “ Wheel load distribution on simply supported skew I-beam composite bridges. ” J. Struct. Eng., 119 ( 2 ), 399 – 419.
Ebeido, T., and Kennedy, J. B. ( 1996 ). “ Girder moments in continuous skew composite bridges. ” J. Bridge Eng., 1 ( 1 ), 37 – 45.
Fu, C. C., Elhelbawey, M., Sahin, M. A., and Schelling, D. R. ( 1996 ). “ Lateral distribution factor from bridge field testing. ” J. Struct. Eng., 122 ( 9 ), 1106 – 1109.
Khaleel, M. A., and Itani, R. Y. ( 1990 ). “ Live-load moments for continuous skew bridges. ” J. Struct. Eng., 116 ( 9 ), 2361 – 2373.
Mabsout, M. E., Tarhini, K. M., Frederick, G. R., and Tayar, C. ( 1997 ). “ Finite-element analysis of steel girder highway bridges. ” J. Bridge Eng., 2 ( 3 ), 83 – 87.
Nowak, A. S., and Eom, J. (2001). “Verification of girder distribution factors for steel girder bridges.” Rep. RC-1393 Prepared for Michigan Dept. of Transportation, Univ. of Michigan, Ann Arbor, Mich.
Tennessee Department of Transportation (TDOT). (1996). “Tennessee structures memorandum 043—Lateral distribution of structural loads.” Nashville, Tenn.
Zokaie, T. ( 2000 ). “ AASHTO-LRFD live load distribution specifications. ” J. Bridge Eng., 5 ( 2 ), 131 – 138.
Zokaie, T., Mish, K. D., and Imbsen, R. A. (1993). “Distribution of wheel loads on highway bridges.” NCHRP 12-26 Project Rep., Transportation Research Board, National Research Council, Washington, D.C.
Information & Authors
Information
Published In
Journal of Bridge Engineering
Volume 9 • Issue 4 • July 2004
Pages: 382 - 390
Copyright
Copyright © 2004 American Society of Civil Engineers.
History
Received: Oct 30, 2001
Accepted: Nov 19, 2002
Published online: Jun 15, 2004
Published in print: Jul 2004
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.