Roebling Suspension Bridge. I: Finite-Element Model and Free Vibration Response
This article has a reply.
VIEW THE REPLYPublication: Journal of Bridge Engineering
Volume 9, Issue 2
Abstract
This first part of a two-part paper on the John A. Roebling suspension bridge (1867) across the Ohio River is an analytical investigation, whereas Part II focuses on the experimental investigation of the bridge. The primary objectives of the investigation are to assess the bridge’s load-carrying capacity and compare this capacity with current standards of safety. Dynamics-based evaluation is used, which requires combining finite-element bridge analysis and field testing. A 3D finite-element model is developed to represent the bridge and to establish its deformed equilibrium configuration due to dead loading. Starting from the deformed configuration, a modal analysis is performed to provide the frequencies and mode shapes. Transverse vibration modes dominate the low-frequency response. It is demonstrated that cable stress stiffening plays an important role in both the static and dynamic responses of the bridge. Inclusion of large deflection behavior is shown to have a limited effect on the member forces and bridge deflections. Parametric studies are performed using the developed finite-element model. The outcome of the investigation is to provide structural information that will assist in the preservation of the historic John A. Roebling suspension bridge, though the developed methodology could be applied to a wide range of cable-supported bridges.
Get full access to this article
View all available purchase options and get full access to this article.
References
Abdel-Ghaffar, A. M.(1978). “Free lateral vibrations of suspension bridges.” J. Struct. Div. ASCE, 104(3), 503–525.
Abdel-Ghaffar, A. M.(1979). “Free torsional vibrations of suspension bridges.” J. Struct. Div. ASCE, 105(4), 767–788.
Abdel-Ghaffar, A. M.(1980). “Vertical vibration analysis of suspension bridges.” J. Struct. Eng., 106(10), 2053–2075.
Abdel-Ghaffar, A. M., and Nazmy, A. S.(1991). “3-D nonlinear seismic behavior of cable-stayed bridges.” J. Struct. Eng., 117(11), 3456–3476.
Abdel-Ghaffar, A. M., and Rubin, L. I.(1982). “Suspension bridge response to multiple support excitations.” J. Eng. Mech. Div., 108(2), 419–435.
ANSYS User’s manual; revision 5.6. (1999). Swanson Analysis Systems, Houston, Pa.
Boonyapinyo, V., Miyata, T., and Yamada, H.(1999). “Advanced aerodynamic analysis of suspension bridges by state-space approach.” J. Struct. Eng., 125(12), 1357–1366.
Brownjohn, J. M. W., and Xia, P. Q.(2000). “Dynamic assessment of curved cable-stayed bridge by model updating.” J. Struct. Eng., 126(2), 252–260.
Friswell, M. I., and Mottershead, J. E. (1995). Finite element model updating in structural dynamics, Kluwer Academic, Dordrecht, The Netherlands.
Grimes, R. G., Lewis, J. G., and Simon, H. D.(1994). “A shift block Laanczos algorithm for solving sparse symmetric generalized eigenproblems.” SIAM J. Matrix Analysis Applications, 15(1), 228–272.
Hazelet and Erdal. (1953). “Report on inspection of physical condition of the Covington & Cincinnati suspension bridges over the Ohio River.” Cincinnati.
Lall, J. (1992). “Analytical modelling of the J. A. Roebling suspension bridge.” MS thesis, Dept. of Civil and Environmental Engineering, Univ. of Cincinnati, Cincinnati.
Nazmy, A. S., and Abdel-Ghaffar, A. M.(1990). “Three-dimensional nonlinear static analysis of cable-stayed bridges.” Compos. Struct., 34(2), 257–271.
Parsons Brinckerhoff Quade & Douglas, Inc. (1988). “Bridge inspection report: John A. Roebling bridge over the Ohio River at Covington.” Division of Maintenance, Dept. of Highways, Kentucky.
Ren, W.-X.(1999). “Ultimate behavior of long span cable-stayed bridges.” J. Bridge Eng., 4(1), 30–37.
Ren, W.-X., Harik, I. E., Blandford, G. E., Lennet, M., and Baseheart, T. M. (2003). “Structural evaluation of the John A. Roebling suspension bridge over the Ohio River.” Research Rep. KTC-2003, Kentucky Transportation Center, College of Engineering, Univ. of Kentucky, Lexington, Ky.
Ren, W.-X., Harik, I. E., Blandford, G. E., Lenett, M., and Basehart, T. M.(2004). “Roebling suspension bridge. II: Ambient testing and live-load response.” J. Bridge Eng., 9(2), 119–126.
Ren, W.-X., and Obata, M.(1999). “Elastic-plastic seismic behaviors of long span cable-stayed bridges.” J. Bridge Eng., 4(3), 194–203.
Spyrakos, C. C., Kemp, E. L., and Venkatareddy, R.(1999). “Validated analysis of Wheeling suspension bridge.” J. Bridge Eng., 4(1), 1–7.
West, H. H., Suhoski, J. E., and Geschwindner, L. F., Jr.(1984). “Natural frequencies and modes of suspension bridges.” J. Struct. Eng., 110(10), 2471–2486.
Wilson, J. C., and Gravelle, W.(1991). “Modeling of a cable-stayed bridge for dynamic analysis.” Earthquake Eng. Struct. Dyn.,20, 707–721.
Information & Authors
Information
Published In
Copyright
Copyright © 2004 American Society of Civil Engineers.
History
Received: Nov 28, 2001
Accepted: Nov 19, 2002
Published online: Feb 19, 2004
Published in print: Mar 2004
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.