Optimum Use of Erosion Control Blankets and Waste Ballast (Rock) Mulch to Aid Grass Establishment on Steep Slopes
This article has been corrected.
VIEW CORRECTIONPublication: Journal of Hydrologic Engineering
Volume 9, Issue 2
Abstract
The focus of this paper is the optimum use of mulch (biodegradable erosion control blankets and waste ballast) on steep slopes (batters) to aid the establishment of grasses for erosion control. Biodegradable blankets are commonly used on steep slopes as mulch to minimize the risk of washout of soil, seeds, and ameliorants during grass establishment to control erosion. However, the blankets can be costly when laid on all sections of the batters. In order to reduce costs, it is suggested to lay the blankets on critical sections such as the outer verge (top) and the bottom. Waste ballast spread on a railway batter provides a degree of permanent protection against erosion, and is useful where fire is a potential hazard. Runoff and soil loss were monitored on experimental plots of a railway embankment batter between December 2000 and May 2001. The cost-effective erosion control strategies on the plots were centerd on control (doing nothing after surface preparation), limited use of erosion control blankets, and variation of waste ballast density on some seeded plots. It was observed that waste ballast and erosion control blankets laid on the outer verge have the potential to control incipient rills by spreading runoff. Erosion control blankets placed at the bottom section of the embankment have the potential to induce deposition of eroded material. Runoff production and soil loss decreases with an increase in the application density of waste ballast, up to a certain level. Waste ballast spread on railway batters enhances grass germination and sustains grass growth.
Get full access to this article
View all available purchase options and get full access to this article.
References
AUS-IFD. (1998). Software developed by Urban Water Systems Group, School of Civil Engineering, Queensland Univ. of Technology, Brisbane, Australia.
Feldman, F., and Nissen, D. (2002). “Alternative testing method for the measurement of ballast fouling: Percentage void contamination.” Proc., Conf. on Railway Engineering CORE2002, Railway Technical Society of Australasia, Kingston, Australia, 101–111.
Gyasi-Agyei, Y. (2001). “Mitigation of hydrology and erosion problems, and fire risks, within Central Queensland railway system, HEFRAIL Project. Part I: Plot scale field trial.” Research Rep., CRE R 69 HEFRAIL-1/2001, Central Queensland Univ., Rockhampton, Australia.
Gyasi-Agyei, Y.(2003). “Pond water source for irrigation on steep slopes.” J. Irrig. Drain. Eng., 129(3), 184–193.
Gyasi-Agyei, Y., Sibley, J., and Ashwath, N.(2001). “Quantitative evaluation of strategies for erosion control on a railway embankment batter.” Hydrolog. Process., 15, 3249–3268.
Gyasi-Agyei, Y., Sibley, J., Ashwath, N., Nissen, D., and Griffin, T. (1998). “A biotechnical approach to the remediation of erosion damage to rail track formations in Central Queensland.” Proc., Conf. on Railway Engineering CORE98, Railway Technical Society of Australasia, Kingston, Australia, 33–40.
Gyasi-Agyei, Y., Sibley, J., Truong, P., and Nissen, D. (2000). “A catchment-based approach to the mitigation of erosion problems in a railway cutting.” Proc., Conf. on Railway Engineering CORE2000, Railway Technical Society of Australasia, Kingston, Australia, 22.1–22.13.
Institution of Engineers Australia. (1998). Australian rainfall and runoff. A guide to flood estimation, Vol. 1, D. H. Pilgrim, ed., National Committee of Water Engineering, the Institution of Engineers Australia, Barton, Australia, reprint.
McNally, G. H. (1998). Soil and rock construction materials, E&FN Spon, London.
Morgan, R. P. C., Quinton, J. N., Smith, R. E., Govers, G., Poesen, J. W. A., Auerswald, K., Chisci, G., Torri, D., and Styczen, M. E.(1998). “The European soil erosion model (EUROSEM): A dynamic approach for predicting sediment transport from fields and small catchments.” Earth Surf. Processes Landforms, 23, 527–544.
Nissen, D. (1997). “A field-based study of erosion characteristics of rail embankments and cuttings in Central Queensland.” Undergraduate thesis, Central Queensland Univ., Rockhampton, Australia.
Plunket, C. F. (2000). “Track infrastructure for high speed passenger operation on a meter gauge network.” Proc., Conf. on Railway Engineering CORE2000, Railway Technical Society of Australasia, Kingston, Australia, 15.1–15.12.
Poesen, J., and Ingelmo-Sanchez, F.(1992). “Runoff and sediment yield from topsoils with different porosity as affected by rock fragment cover and position.” Catena, 19, 451–474.
Rickson, R. J., and Loveday, A. D. (1998). “Jute geotextiles, techno-economical manual.” Common Fund for Commodities, Tech. Paper. No. 1, Common Fund for Commodities, Amsterdam, The Netherlands.
van Wesemael, B., Poesen, J., Kosmas, C. S., Danalatos, N. G., and Nachtergaele, J.(1996). “Evaporation from cultivated soils containing rock fragments.” J. Hydrology, 182(1–4), 65–82.
Witheridge, G., and Walker, R. (1996). “Soil erosion and sediment control, Engineering guidelines for Queensland construction sites.” The institution of engineers, the Institution of Engineers Queensland Division, Brisbane, Australia.
Information & Authors
Information
Published In
Journal of Hydrologic Engineering
Volume 9 • Issue 2 • March 2004
Pages: 150 - 159
Copyright
Copyright © 2004 American Society of Civil Engineers.
History
Received: Jun 10, 2002
Accepted: May 8, 2003
Published online: Feb 19, 2004
Published in print: Mar 2004
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.