Pavement Failures: Oversights, Omissions and Wishful Thinking
This article has a reply.
VIEW THE REPLYThis article has a reply.
VIEW THE REPLYPublication: Journal of Performance of Constructed Facilities
Volume 5, Issue 4
Abstract
Pavement failure is a common and recurring problem. The results of such failures are not catastrophic like the collapse of a building or a failure of a dam, but they represent a serious financial loss and are a nuisance to the public. Despite a long history of road and pavement construction, engineers continue to design and build pavements that fail. This paper uses specific examples to illustrate common design and construction problems. Examples of design errors illustrate problems of not recognizing both critical assumptions used in a “standard” design curve and natural conditions that affect design. Materials are critical to proper performance, and examples of improper material selection or specification use are presented. No pavement design is any better than its construction or maintenance, so examples of typical construction problems and maintenance failures are also included. The 12 examples covered in this paper illustrate that these failures are more likely due to our failure to practice engineering properly rather than to inadequate technical knowledge or development. Professional performance by engineers remains the best way to avoid such failures.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
“Asphalt plant manual.” (1986). MS‐3, Asphalt Inst., Lexington, KY.
2.
Dollar‐Mantuani, L. (1978). “Soundness and deleterious substances.” Significance of tests and properties of concrete and concrete‐making materials (STP 169B), Am. Soc. for Testing and Mater., Philadelphia, Pa.
3.
Friedman, D., and Black, R. (1991). “The high price of potholes.” U.S. News and World Report, 110(14), Apr. 15.
4.
“Guide for measuring, mixing, transporting, and placing concrete.” (1985). ACI 304R‐85. Am. Concr. Inst., Detroit, Mich.
5.
Holtz, W. G., and Gibbs, H. J. (1954). “Engineering properties of expansive clays.” Proc. Separate No. 516, ASCE, New York, N.Y.
6.
Lynch, L. N. (1988). “Review of the effects of pay reduction clause on bituminous intermediate and surface courses.” Pavement Systems Div., U.S. Army Engr. Waterways Experiment Station, Vicksburg, Miss.
7.
Rollings, R. S. (1988). “Substandard materials for pavement construction.” Proc. 14th Australian Road Res. Board Conf., 14(7), Canberra, Australia.
8.
Rollings, R. S. (1989). “Developments in the Corps of Engineers rigid airfield design procedures.” Proc. 4th Int. Conf. on Concrete Pavement Design and Rehabilitation, Purdue University.
9.
Rollings, R. S. (1991). “Responsibility and liability of inspection.” Proc. Construction Congress '91, ASCE.
10.
Snethen, D. R. (1975). “A review of engineering experiences with expansive soils in highway subgrades.” FHWA‐RD‐75‐48, Federal Highway Admin., Washington, D.C.
11.
“Standard recommended practice for evaluation of frost resistance of aggregates in air‐entrained concrete by critical dilation procedures.” (1980). ASTM C 682, Am. Soc. for Testing and Mater., Philadelphia, Pa.
12.
“Standard test method for resistance of concrete to rapid freezing and thawing.” (1980). ASTM C 666, Am. Soc. for Testing and Mater., Philadelphia, Pa.
13.
“Test method for soundness of aggregates by use of sodium sulfate or magnesium sulfate.” (1976). ASTM C 88, Am. Soc. for Testing and Mater., Philadelphia, Pa.
14.
Tumbull, W. J., and Foster, C. R. (1956). “Stabilization of materials by compaction.” J. Soil Mech. and Found. Div., ASCE, New York, N.Y.
15.
Yoder, E. J., and Witczak, M. W. (1975). Principles of pavement design. 2nd Ed., John Wiley and Sons, New York, N.Y.
Information & Authors
Information
Published In
Copyright
Copyright © 1991 ASCE.
History
Published online: Nov 1, 1991
Published in print: Nov 1991
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.