Effective Slab Width in Prestressed Twin-Girder Composite Decks
This article has a reply.
VIEW THE REPLYThis article has a reply.
VIEW THE REPLYPublication: Journal of Structural Engineering
Volume 132, Issue 9
Abstract
The paper shows the shear-lag effect in slabs of twin-girder steel–concrete composite decks due to the main prestressing techniques such as support settlements, bonded cables inside the concrete slab, and external slipping tendons. The analysis is performed by means of a beam model taking into account the loss of planarity for the slab cross section, the flexibility of the shear connection, and the time-dependent behavior of the concrete. A linear elastic behavior is considered for the steel beams and shear connection while viscoelastic behavior is assumed for the concrete slab. A parametrical analysis is carried out on realistic bridge decks for each kind of prestressing technique, by varying the span length and the girder spacing. The distribution of longitudinal normal stresses in the slab is shown for each prestressing technique and the effective slab widths are then evaluated and compared with those suggested by ENV 1994-2 for different span lengths and for different spacing of the beams.
Get full access to this article
View all available purchase options and get full access to this article.
References
Adekola, A. O. (1974). “The dependence of shear lag on partial interaction in composite beams.” Int. J. Solids Struct., 10, 389–400.
Comité Euro-International du Beton (CEB). (1988). C.E.B. Bullettin d’Information No. 190, C.E.B.–F.I.P. model code 1990, Paris.
Computer and Structures, Inc. (2004). “CSI analysis reference manual.” SAP 2000, Berkeley, Calif.
Dall’Asta, A., Dezi, L., and Leoni, G. (1999). “Long term analysis of externally prestressed composite beams.” Proc., ICASS99-2nd Int. Conf. on Advances in Steel Structures, Vol. II, Hong Kong, 931–938.
Dezi, L., Gara, F., and Leoni, G. (2003). “Shear-lag effect in twin-girder composite decks.” Steel Compos. Struct., 3(2), 111–122.
Dezi, L., Gara, F., Leoni, G., and Tarantino, A. M. (2001). “Time-dependent analysis of shear-lag effect in composite beams.” J. Mech. Eng., 127(1), 71–79.
Dezi, L., Leoni, G., and Tarantino, A. M. (1998). “Creep and shrinkage analysis of composite beams.” Prog. Struct. Eng. Mater., 1(2), 170–177.
European Committee for Standardization (CEN). (1997). “Design of composite steel and concrete structures. II: Bridges.” Eurocode 4, ENV 1994-2, Brussels, Belgium.
Kristek, V., and Bazant, Z. P. (1987). “Shear-lag effect and uncertainty in concrete box girder creep.” J. Struct. Eng., 113(3), 557–574.
Kuzmanović, B. O., and Graham, H. J. (1981). “Shear lag in box girders.” J. Struct. Div. ASCE, 107(9), 1701–1712.
Lee, C. K., and Wu, G. J. (2000). “Shear-lag analysis by the adaptive finite-element method. I: Analysis of simple plated structures.” Thin-Walled Struct., 38, 285–309.
Newmark, N. M., Siess, C. P., and Viest, I. M. (1951). “Test and analysis of composite beams with incomplete interaction.” Proc. Soc. Exp. Stress Anal., 9(1), 75–92.
Prokić, A. (2001). “New finite element for analysis of shear lag.” Comput. Struct., 80, 1011–1024.
Reissner, E. (1946). “Analysis of shear lag in box beams by the principle of the minimum potential energy.” Q. Appl. Math., 4(3), 268–278.
Sedlacek, G., and Bild, S. (1993). “A simplified method for the determination of the effective width due to shear lag effects.” J. Constr. Steel Res., 24, 155–182.
Von Kármán, Th. (1924). Die mittragende poreite, Springer, Berlin.
Information & Authors
Information
Published In
Copyright
© 2006 ASCE.
History
Received: Aug 9, 2004
Accepted: Dec 16, 2005
Published online: Sep 1, 2006
Published in print: Sep 2006
Notes
Note. Associate Editor: Dat Duthinh
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.