Seismic Behavior of Sheathed Cold-Formed Structures: Numerical Study
This article is a reply.
VIEW THE ORIGINAL ARTICLEThis article has a reply.
VIEW THE REPLYPublication: Journal of Structural Engineering
Volume 132, Issue 4
Abstract
This paper presents and discusses the results of a numerical study on seismic deformation demand to sheathed cold-formed steel structures. It is part of a wider research, involving also physical tests on oriented strand board-sheathed stud walls. Numerical results have been obtained using an ad hoc mathematical model of the hysteresis response of sheathed stud walls, also taking into account the strong nonlinearity of the response for small lateral displacements and the strong pinching of hysteresis loops. This model has been calibrated against data coming from physical tests, using both old available experimental results and newly obtained ones. Numerical results have been elaborated on in order to both judge the seismic performance of the structure under increasing seismic intensity levels and develop an ad hoc cyclic loading protocol for physical tests.
Get full access to this article
View all available purchase options and get full access to this article.
References
Ambraseys, N., Smit, P., Berardi, R., Rinaldis, D., Cotton, F., and Berge, C. (2000). “European strong motion database.” (CD-ROM), European Council, Environment and Climate Research Programme.
Applied Technology Council (ATC). (1992). “Guidelines for cyclic seismic testing of components of steel structures.” ATC-24, Redwood City, Calif.
Applied Technology Council (ATC). (1996). “Seismic evaluation and retrofit of concrete buildings.” ATC-40, California Seismic Safety Commission, Rep. No. SSC 96-01, Redwood City, Calif.
COLA-UCI (2001). “Report of a testing program of light-framed walls with wood-sheathed shear panels.” Final Rep. to the City of Los Angeles, Dept. of Building and Safety, Structural Engineers Association of Southern California, Irvine, Calif.
Della Corte G., De Matteis, G., and Landolfo, R. (2000). “Influence of connection modelling on seismic response of moment resisting steel frames.” Moment resistant connections of steel building frames in seismic areas, F. M. Mazzolani, ed., E&FN Spon, London, 485–512.
European Committee for Standardization (CEN). (2003). “Eurocode 8: Design of structures for earthquake resistance—Part 1: General rules—Seismic actions and rules for buildings.” prEN 1998-1, final draft December 2003, Bruxelles, Belgium
Federal Emergency Management Agency (FEMA). (1997). “NEHRP guidelines for the seismic rehabilitation of buildings.” Rep. No. 273, Washington, D.C.
Federal Emergency Management Agency (FEMA). (2000). “Seismic design criteria for new moment-resisting steel frame construction.” Rep. No. 350, Washington, D.C.
Filiatrault, A., and Folz, B. (2002). “Performance-based seismic design of wood framed buildings.” J. Struct. Eng., 128(1), 39–47.
Fulop, L. A. (2002). “Calibration of an equivalent bracing system for 3D dynamic inelastic analysis of steel framed building structures with dissipative shear walls.” Proc., Int. Colloquium on Stability and Ductility of Steel Structures (SDSS 2002), M. Ivanyi, ed., Budapest, Hungary, 669–676.
Fulop, L. A., and Dubina, D. (2002). “Seismic performance of wall-stud shear walls.” Proc., 16th Int. Specialty Conf. on Cold-Formed Steel Structures, Orlando, Fl., 483–500.
Fulop, L. A, and Dubina, D. (2003). “Are the cold-formed wall stud shear walls dissipative systems in seismic resistant buildings? How much?” Proc., 4th Int. Conf. on Behaviour of Steel Structures in Seismic Areas (STESSA 2003), F. M. Mazzolani, ed., Naples, Italy, 841–846.
Fulop, L. A., and Dubina, D. (2004). “Performance of wall-stud cold-formed shear panels under monotonic and cyclic loading—Part II: Numerical modelling and performance analysis.” Thin-Walled Struct., 42, 339–349.
Gad, E. F., Chandler, A. M., Duffield, C. F., and Hutchinson, G. (1999). “Earthquake ductility and overstrength in residential structures.” Struct. Eng. Mech., 8(4),361–382.
Hamburger, R. O., Foutch, D. A., and Cornell, C. A. (2000). “Performance basis of guidelines for evaluation, upgrade and design of moment-resisting steel frames.” Proc., 12th World Conf. on Earthquake Engineering, (CD-Rom) Auckland, New Zealand, Paper No. 2543.
Krawinkler, H. (1996). “Cycling loading histories for seismic experimentation on structural components.” Earthquake Spectra, 12(1), 1–12.
Landolfo, R., Fiorino, L., and Della Corte, G. (2006). “Seismic behaviour of sheathed cold-formed steel structures physical tests.” J. Struct. Eng., 132(4), 570–581.
Richard, R. M., and Abbott, B. J. (1975). “Versatile elastic–plastic stress–strain formula.” J. Eng. Mech. Div., Am., 101(4), 511–515.
Rosowsky, D. V., and Ellingwood, B. R. (2002). “Performance-based engineering of wood frame housing: Fragility analysis methodology.” J. Struct. Eng., 128(1), 32–38.
Serrette, R., Encalada, J., Matchen, B., Nguyen, H., and Williams, A. (1997). “Additional shear wall values for light weight steel framing.” Rep. No. LGSRG-1-97, Light Gauge Steel Research Group, Dept. of Civil Engineering, Santa Clara Univ., Santa Clara, Calif.
Serrette, R., Hall, G., and Nguyen, H. (1996a). ”Dynamic performance of light gauge steel framed shear walls.” Proc., 13th Int. Specialty Conf. on Cold-Formed Steel Structures, St. Louis, 487–498.
Serrette, R., Nguyen, H., and Hall, G. (1996b). “Shear wall values for light weight steel framing.” Rep. No. LGSRG-3-96, Light Gauge Steel Research Group, Dept. of Civil Engineering, Santa Clara Univ., Santa Clara, Calif.
Structural Engineers Association of Southern California (SEAOSC). (1997). “Standard method of cyclic (reversed) load tests for shear resistance of framed walls for buildings.” Whittier, Calif.
Zhao, Y., and Rogers, C. A. (2002). “Preliminary R-values for seismic design of steel stud shear walls.” Proc., 16th Int. Specialty Conf. on Cold-Formed Steel Structures, Orlando, Fla., 468–482.
Information & Authors
Information
Published In
Copyright
© 2006 ASCE.
History
Received: May 3, 2004
Accepted: Apr 22, 2005
Published online: Apr 1, 2006
Published in print: Apr 2006
Notes
Note. Associate Editor: Brian Uy
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.