Seismic Analysis of Woodframe Structures. I: Model Formulation
This article has a reply.
VIEW THE REPLYPublication: Journal of Structural Engineering
Volume 130, Issue 9
Abstract
A simple numerical model to predict the dynamic characteristics, quasistatic pushover, and seismic response of woodframe buildings is presented. In this model the building structure is composed of two primary components: rigid horizontal diaphragms and nonlinear lateral load resisting shear wall elements. The actual three-dimensional building is degenerated into a two-dimensional planar model using zero-height shear wall spring elements connected between adjacent diaphragms or the foundation. The degrading strength and stiffness hysteretic behavior of each wood shear wall in the building can be characterized using an associated numerical model that predicts the walls load-displacement response under general quasistatic cyclic loading. In turn, in this model, the hysteretic behavior of each shear wall is represented by an equivalent nonlinear shear spring element. With this simple approach the response of the building is defined in terms of only three degrees of freedom per floor. This numerical model has been incorporated into the computer program SAWS (seismic analysis of woodframe structures). This paper discusses model formulation. In Part II, the predictive capabilities of this program are compared with recent shake table tests performed on a full-scale two-story woodframe house.
Get full access to this article
View all available purchase options and get full access to this article.
References
Chopra, A. (2001). Dynamics of structures: Theory and applications to earthquake engineering, 2nd Ed., Prentice-Hall, Upper Saddle River, N.J.
Dolan, J. D., and Madsen, B.(1992). “Monotonic and cyclic tests of timber shear walls.” Can. J. Civ. Eng., 19(4), 415–422.
Durham, J. P. (1998). “Seismic response of wood shearwalls with oversized oriented strand board panels.” MASc thesis, Univ. of British Columbia, Vancouver B.C., Canada.
Filiatrault, A. (2002). Elements of earthquake engineering and structural dynamics, 2nd Ed., Polytechnic International, Montréal.
Folz, B., and Filiatrault, A. (2000). “CASHEW—Version 1.0: A computer program for cyclic analysis of wood shear walls.” Rep. No. SSRP-2000/10, Structural Systems Research Project, Dept. of Structural Engineering, Univ. of California, San Diego, La Jolla, Calif.
Folz, B., and Filiatrault, A.(2001a). “Cyclic analysis of wood shear walls.” J. Struct. Eng., 127(4), 433–441.
Folz, B., and Filiatrault, A. (2001b). “SAWS—Version 1.0: A computer program for seismic analysis of woodframe buildings.” Rep. No. SSRP-2001/09, Structural Systems Research Project, Dept. of Structural Engineering, Univ. California, San Diego, La Jolla, Calif.
Folz, B., and Filiatrault, A.(2004). “Seismic analysis of woodframe structures II: Model implementation and verification.” J. Struct. Eng., 130(9), 1361–1370.
Gatto, K., and Uang, C.-M. (2001). “Cyclic response of woodframe shear walls: Loading protocol and rate of loading effects.” Rep. No. SSRP-2001/06, Structural Systems Research Project, Dept. of Structural Engineering, Univ. of California, San Diego, La Jolla, Calif.
Ge, Y. Z. (1991). “Response of wood-frame houses to lateral loads.” MS thesis, Univ. of Missouri, Columbia, Mo.
Groom, K. M., and Leichti, R. J.(1994). “Transforming a corner of a light-frame wood structure to a set of nonlinear springs.” Wood Fiber Sci., 26(1), 28–35.
Gupta, A. K., and Kuo, G. P.(1987). “Modeling of a wood-framed house.” J. Struct. Eng., 113(2), 260–278.
Itani, R. Y., and Cheung, C. K. (1983). “Dynamic response of wood diaphragms in low-rise wood-framed buildings.” Final Rep., Part I, NSF Grant No. CEE-8114530, Washington State Univ., Pullman, Wash.
Kasal, B., Leichti, R. J., and Itani, R. Y.(1994). “Nonlinear finite-element model of complete light-frame wood structures.” J. Struct. Eng., 120(1), 100–119.
Krawinkler, H., and Seneviratna, G. D. P. K.(1998). “Pros and cons of a pushover analysis of seismic performance evaluation.” Eng. Struct., 20(4-6), 452–464.
Krawinkler, H., Parisi, F., Ibarra, L., Ayoub, A., and Medina, R. (2000). “Development of a testing protocol for wood frame structures.” CUREE Publication No. W-02, Richmond, Calif.
McMullin, K. M., and Merrick, D. (2001). “Seismic performance of gypsum walls—Experimental test program.” Final Rep. to CUREE, Richmond, Calif.
Phillips, T. L., Itani, R. Y., and McLean, D. I.(1993). “Lateral load sharing by diaphragms in wood-frame buildings.” J. Struct. Eng., 119(5), 1556–1571.
Porter, M. L. (1987). “Sequential phased displacement (SPD) procedure for TCCMAR testing.” Proc., 3rd Meeting of the Joint Technical Coordinating Committee on Masonry Research, U.S.–Japan Coordinated Earthquake Research Program, Tomamu, Japan.
Schmidt, R. J., and Moody, R. C.(1989). “Modeling laterally loaded light-frame buildings.” J. Struct. Eng., 115(1), 201–217.
Seible F., Filiatrault, A., and Uang, C.-M. (1999). “Proc., Invitational Workshop on Seismic Testing, Analysis and Design of Woodframe Construction.” CUREE Publication No. W-01, Richmond, Calif.
Tarabia, A. M., and Itani, R. Y.(1997). “Seismic response of light-frame wood buildings.” J. Struct. Eng., 121(11), 1470–1477.
Valles, R. E., Reinhorn, A. M., Kunnath, S. K., Li, C., and Madan, A. (1996). “IDARC 2D Version 4: A program for the inelastic damage analysis of buildings.” Technical Rep. No. NCEER-94-0010, National Center for Earthquake Engineering Research, State Univ. of New York at Buffalo, Buffalo, N.Y.
Yancy, C. W., Cheok, G. S., Sadek, F., and Mohraz, B. (1998). “A sum-mary of the structural performance of single-family, wood-frame housing.” Technical Rep. No. NISTIR 6224, National Inst. of Standards and Technology, Gaithersburg, Md.
Yoon, T. Y., and Gupta, A. (1991). “Behavior and failure modes of low-rise wood-framed buildings subjected to seismic and wind forces.” Dept. of Civil Engineering, North Carolina State Univ., Raleigh, N.C.
Information & Authors
Information
Published In
Copyright
Copyright © 2004 American Society of Civil Engineers.
History
Received: Feb 5, 2003
Accepted: Nov 25, 2003
Published online: Aug 16, 2004
Published in print: Sep 2004
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.