Realistic Modeling of Composite and Reinforced Concrete Floor Slabs under Extreme Loading. I: Analytical Method
This article has a reply.
VIEW THE REPLYPublication: Journal of Structural Engineering
Volume 130, Issue 12
Abstract
This paper presents a new flat shell element for composite and reinforced concrete (RC) floor slabs subject to extreme loading conditions, accounting for the effects of geometric as well as material nonlinearities. A novel feature of the proposed element is its treatment of problems associated with the geometric orthotropy of composite floor slabs, achieved through a modification of the conventional Reissner–Mindlin hypothesis. The new element is formulated in a local corotational framework, enabling the use of linear strain-displacement relationships, with the influence of geometric nonlinearity addressed through transformations between the local and global systems. In addition, a robust nonlinear material model is proposed for concrete which captures the salient response characteristics under extreme loading conditions, including the effects of elevated temperature due to fire. The proposed element is implemented within the nonlinear structural analysis program ADAPTIC, which is used in this paper to provide several verification examples, focusing principally on the significance of the assumptions made in the element formulation. Extensive verification against experiments on composite and RC floor slabs is undertaken in the companion paper, where favorable comparisons between the predictions of the proposed method and experimental results are generally achieved.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Belytschko, T., Liu, W.K., and Moran, B. ( 2000). Nonlinear finite elements for continua and structures, Wiley, Chichester, England.
2.
Crisfield, M.A. ( 1991). Non-linear finite element analysis of solids and structures, Vol. 1, Wiley, Chichester, U.K.
3.
Crisfield, M.A. ( 1997). Non-linear finite element analysis of solids and structures, Vol. 2, Wiley, Chichester, U.K.
4.
Elghazouli, A. Y., and Izzuddin, B. A. (2001). “Analytical assessment of the structural performance of composite floors subject to compartment fires.” Fire Saf. J., 36, 769–793.
5.
Elghazouli, A. Y., and Izzuddin, B. A. (2004). “Realistic modeling of composite and RC floor slabs under extreme loading. II: Verification and application.” J. Struct. Eng., 130(12) 1985-1996.
6.
Huang, Z., Burgess, I. W., and Plank, R. J. (2000). “Effective stiffness modelling of composite concrete slabs in fire.” Eng. Struct., 22, 1133–1144.
7.
Hughes, T. J. R., and Tezduyar, T. E. (1981). “Finite elements based upon Mindlin plate theory with particular reference to the four-node bilinear isoparametric element.” J. Appl. Mech., 48, 587–596.
8.
Izzuddin, B.A. ( 1991). “Nonlinear dynamic analysis of framed structures.” PhD thesis, Imperial College, University of London, London.
9.
Izzuddin, B.A. ( 2002). “Advanced large displacement analysis of composite floor slabs.” Proc., 15th Engineering Mechanics Conf., ASCE, Reston, Va.
10.
Izzuddin, B.A., and Elghazouli, A.Y. ( 2003). “An advanced concrete model for R/C and composite floor slabs subject to extreme loading.” Proc., 9th Int. Conf. on Civil and Structural Engineering Computing, The Netherlands.
11.
Izzuddin, B. A., and Fang, Q. (1997). “Rate-sensitive analysis of framed structures—Part I: Model formulation and verification.” Struct. Eng. Mech., 5(3), 221–237.
12.
Izzuddin, B. A., and Lloyd Smith, D. (1996). “Large displacement analysis of elasto-plastic thin-walled frames—Part I: Formulation and implementation.” J. Struct. Eng., 122(8), 905–914.
13.
Izzuddin, B. A., and Moore, D. B. (2002). “Lessons from a full-scale fire test.” Proc. Inst. Civ. Eng., Struct. Build., 152(4), 319–329.
14.
Kotsovos, M.D., and Pavlovic, M.N. ( 1995). Structural concrete: Finite element analysis for limit-state design, Thomas Telford, England.
15.
O’Connor, M. A., and Martin, D. M. (1998). “Behaviour of a multi-storey steel framed building subjected to fire attack.” J. Constr. Steel Res., 46(1–3), Paper No. 169.
16.
Sebastian, W. M., and McConnel, R. E. (2000). “Nonlinear FE analysis of steel-concrete composite structures.” J. Struct. Eng., 126(6), 662–674.
17.
Song, L., Izzuddin, B. A., Elnashai, A. S., and Dowling, P. J. (2000). “An integrated adaptive environment for fire and explosion analysis of steel frames—Part I: Analytical models.” J. Constr. Steel Res., 53(1), 63–85.
18.
Zienkiewicz, O.C., and Taylor, R.L. ( 1991). The finite element method: Vol. 2—Solid and fluid mechanics, dynamics and nonlinearity, McGraw-Hill, New York.
Information & Authors
Information
Published In
Copyright
Copyright © 2004 ASCE.
History
Published online: Nov 15, 2004
Published in print: Dec 2004
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.