Bearing, Shear, and Torsion Capacities of Steel Angle Sections
This article is a reply.
VIEW THE ORIGINAL ARTICLEPublication: Journal of Structural Engineering
Volume 128, Issue 11
Abstract
Steel angle sections are commonly used as beams to support distributed loads which cause biaxial bending and torsion. However, many design codes do not have any design rules for torsion, while some recommendations are unnecessarily conservative, or are of limited application, or fail to consider some effects which are thought to be important. In this paper, proposals are developed for the section capacities of angle sections under bearing, shear, and uniform torsion. In a companion paper, consideration is given to the first-order elastic analysis of the biaxial bending of angle section beams, including the effects of restraints, and proposals are developed for the section moment capacities of angle sections under biaxial bending. The proposals in this and the companion paper can be used to design steel angle section beams which are laterally restrained so that lateral buckling and second-order effects are unimportant.
Get full access to this article
View all available purchase options and get full access to this article.
References
AISC. (2000a). “Specification for load and resistance factor design of single-angle members.” American Institute of Steel Construction, Chicago.
AISC. (2000b). “Commentary on the specification for load and resistance factor design of single-angle members.” American Institute of Steel Construction, Chicago.
British Standards Institution (BSI). (2000). “BS5950 structural use of steelwork in building. Part 1:2000. Code of practice for design in simple and continuous construction: Hot rolled sections.” British Standards Institution, London.
Bulson, P. S. (1970). The stability of flat plates, Chatto and Windus, London.
Papangelis, J. P., and Hancock, G. T. (1997). THIN-WALL—Cross-section analysis and finite strip buckling analysis of thin-walled structures, Center for Advanced Structural Engineering, Univ. of Sydney, Sydney, Australia.
Pi, Y. L., and Trahair, N. S.(1994a). “Inelastic bending and torsion of steel I-beams.” J. Struct. Eng., 120(12), 3397–3417.
Pi, Y. L., and Trahair, N. S. (1994b). “Steel member design for combined torsion and bending.” Civil engineering transactions, Institution of Engineers, Australia, Vol. CE36, No. 4, 325–330.
Standards Australia (SA). (1998). AS 4100-1998 Steel structures, Standards Australia, Sydney, Australia.
Timoshenko, S. P., and Gere, J. M. (1961). Theory of elastic stability, McGraw-Hill, New York.
Trahair, N. S.(2002). “Moment capacities of steel angle sections.” J. Struct. Eng. 128(11), 1387–1393.
Trahair, N. S., Bradford, M. A., and Nethercot, D. A. (2001). The behaviour and design of steel structures to BS5950, 3rd British Ed., E & FN Spon, London.
Information & Authors
Information
Published In
Copyright
Copyright © 2002 American Society of Civil Engineers.
History
Received: Dec 3, 2001
Accepted: Mar 21, 2002
Published online: Oct 15, 2002
Published in print: Nov 2002
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.