Parameter Estimation of Structures from Static Response. I. Computational Aspects
This article has a reply.
VIEW THE REPLYPublication: Journal of Structural Engineering
Volume 120, Issue 11
Abstract
Two algorithms are proposed for estimating member constitutive properties of a finite‐element model with known geometry and topology from measured displacements under a known static loading. The proposed algorithms are based on the concept of minimizing an index of discrepancy between the model and the measurements, the first using the error in nodal forces and the second using the error in displacements at the measurement sites. The problem is set up as a constrained least‐squares minimization and is solved with the recursive quadratic programming method. Both estimators are capable of making estimates with spatially incomplete measurements, and both are amenable to the modeling of complex structures.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Banan, M. R., and Hjelmstad, K. D. (1993). “Identification of structural systems from measured response.” Struct. Res. Ser. No. 579. UILU‐ENG‐93‐2002. Univ. of Illinois, Urbana, Ill.
2.
Banan, M. R., Banan, M. R., and Hjelmstad, K. D. (1994). “Parameter estimation of structures from static response. II: numerical simulation studies.” J. Struct. Engrg., ASCE, 120(11), 3259–3283.
3.
Fletcher, R. (1971). “A general quadratic programming algorithm.” J. Inst. Maths. Applics., 7, 76–91.
4.
Hajela, P., and Soerio, F. J. (1989). “Recent developments in damage detection based on system identification methods.” Struct. Optim., 2, 1–10.
5.
Hajela, P., and Soeiro, F. (1990). “Structural damage detection based on static and modal analysis.” AIAA J., 28(6), 1110–1115.
6.
Hjelmstad, K. D., Wood, S. L., and Clark, S. J. (1992). “Mutual residual energy method for parameter estimation in structures.” J. Struct. Engrg., ASCE, 118(1), 223–242.
7.
Press, W., Flannery, B., Teukolsky, S., and Vetterling, W. (1986). Numerical recipes. Cambridge Univ. Press, Cambridge, U.K.
8.
Sanayei, M., and Nelson, R. B. (1986). “Identification of structural element stiffnesses from incomplete static test data.” SAE Tech. Papers Se. No. 861793,7.1237–7.1248.
9.
Sanayei, M., and Onipede, O. (1991). “Damage assessment of structures using static test data.” AIAA J., 29(7), 1174–1179.
10.
Sanayei, M., and Scampoli, S. F. (1991). “Structural element stiffness identification from static test data.” J. Engrg. Mech., ASCE, 117(5), 1021–1036.
11.
Sheena, Z., Unger, A., and Zalmanovich, A. (1982). “Theoretical stiffness matrix correction by using static test results.” Israel Journal of Technology, 20, 245–253.
Information & Authors
Information
Published In
Copyright
Copyright © 1994 American Society of Civil Engineers.
History
Received: Oct 22, 1993
Published online: Nov 1, 1994
Published in print: Nov 1994
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.