Coating Delamination by Radial Tension in Prestressed Concrete Pipe. I: Experiments
This article has a reply.
VIEW THE REPLYPublication: Journal of Structural Engineering
Volume 119, Issue 9
Abstract
This paper is the first of a two‐part paper that deals with mortar‐coating delamination by radial tension of prestressed concrete cylinder pipe. The first part presents the results of tests (the second part presents the results of analysis performed). The radial tensile strength tests were conducted both on laboratory specimens and field pipe. The radial tensile strength of laboratory specimens was measured to evaluate the effect of shrinkage, mortar moisture and wire diameter and spacing. The radial tensile strength of mortar coating was measured on field pipe buried or exposed to the outdoors environment for a long time period. The test results show that maturing of mortar increases its radial tensile strength, while shrinkage and wire diameter have only small effects on the radial tensile strength of pipe with wire spacing in excess of two wire diameters. A significant decrease in radial tensile strength is observed for wire spacing of less than two wire diameters; a smaller decrease is observed for wire spacings in excess of four wire diameters; however, for wire spacings more than two and less than four wire diameters, the radial tensile strength is independent of wire spacing.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
“Building code requirements for reinforced concrete.” (1989). ACl 318‐89; 318R‐89, American Concrete Institute (ACI), Detroit, Mich., 43.
2.
Heger, F. J., Zarghamee, M. S., and Dana, W. R. (1990). “Limit states design of prestressed design of prestressed concrete pipe. I: Criteria.” J. Struct. Engrg., ASCE, 116(8), 2083–2104.
3.
“Prediction of creep, shrinkage, and temperature effects in concrete structures.” (1990). ACl 209R‐82 ACl manual of concrete practice, part 1, American Concrete Institute (ACI), Detroit, Mich.
4.
Zarghamee, M. S., Fok, K. L., and Skiliotis, E. S. (1990). “Limit states design of prestressed concrete pipe. II: Procedure.” J. Struct. Engrg., ASCE, 116(8), 2105–2126.
5.
Zarghamee, M. S., Ojdrovic, R. P., and Dana, W. R. (1993). “Coating delamination by radial tension in prestressed concrete pipe. II: Analysis.” J. Struct. Engrg., ASCE, 119(9), 2720–2732.
Information & Authors
Information
Published In
Copyright
Copyright © 1993 American Society of Civil Engineers.
History
Received: May 19, 1992
Published online: Sep 1, 1993
Published in print: Sep 1993
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.