Seismic Code Analysis of Buildings without Locating Centers of Rigidity
This article has a reply.
VIEW THE REPLYPublication: Journal of Structural Engineering
Volume 119, Issue 10
Abstract
Static force procedures of most building codes require that the lateral earthquake force at each floor level of an asymmetric‐plan building be applied eccentrically from the centers of rigidity. To implement such procedures, it seemed necessary in the past to determine the locations of the centers of rigidity, an often confusing and cumbersome process. This paper presents a new approach for code lateral force analysis of asymmetric‐plan buildings without locating the centers of rigidity. This procedure combines the results from three static analyses, which can be implemented directly on most commercially available computer programs for analysis of multistory buidings. The work presented in this paper should dispel the long‐held view that locations of the centers of rigidity must be determined to implement the code procedure, thereby removing one of the major difficulties in building analysis.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Cheung, V. W.‐T., and Tso, W. K. (1986). “Eccentricity in irregular multistory buildings.” Can. J. Civ. Engrg., 13(1), 46–52.
2.
Earthquake resistant regulations, a world list. (1992). Int. Assoc. for Earthquake Engrg., Tokyo, Japan.
3.
Gomez, R., and Garcia‐Ranz, F. (1988). “The Mexico earthquake of September 19, 1985—complementary technical norms for earthquake resistant design.” Earthquake Spectra, 4(3), 441–460.
4.
Hejal, R., and Chopra, A. K. (1987). “Earthquake response of torsionally‐coupled buildings.” Report no. UCB/EERC‐87/20, Earthquake Engrg. Res. Ctr., Univ. of California, Berkeley, Calif.
5.
Humar, J. L. (1984). “Design for seismic torsional forces.” Can. J. Civ. Engrg., 12(2), 150–163.
6.
National building code of Canada. (1990). Assoc. Committee on the Nat. Build. Code, Nat. Res. Council of Canada, Ottawa, Ontario.
7.
New Zealand standard NZS 4203: code of practice for general structural design loadings for buildings. (1984). Standards Assoc. of New Zealand, Willington, New Zealand.
8.
Poole, R. A. (1977). “Analysis for torsion employing provisions of NZRS 4203:1974.” Bull. of the New Zealand Soc. for Earthquake Engrg., 10(4), 219–225.
9.
Riddell, R., and Vasquez, J. (1984). “Existence of centers of resistance and torsional uncoupling of earthquake response of buildings.” Proc., 8th World Conf. on Earthquake Engrg., 4, 187–194.
10.
“Tentative provisions for the development of seismic regulations for buildings.” (1978). ATC3‐06, Appl. Tech. Council, Palo Alto, Calif.
11.
Tso, W. K. (1990). “Static eccentricity concept for torsional moment estimations.” J. Struct. Engrg., ASCE, 116(5), 1199–1212.
12.
Tso, W. K., and Cheung, V. W.‐T. (1986). “Decoupling of equations of equilibrium in lateral load analysis of multistory buildings.” Comp. and Struct., 23(5), 679–684.
13.
Uniform building code. (1991). Int. Conf. of Build. Officials, Whittier, Calif.
14.
Wilson, E. L., and Habibullah, A. (1984). SAP80 structural analysis programs for the static and dynamic finite element analysis of structures. Computers and Structures Inc., Berkeley, Calif.
Information & Authors
Information
Published In
Copyright
Copyright © 1993 American Society of Civil Engineers.
History
Received: Nov 20, 1992
Published online: Oct 1, 1993
Published in print: Oct 1993
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.