Three-Dimensional CFD Modeling of Self-Forming Meandering Channel
This article has a reply.
VIEW THE REPLYPublication: Journal of Hydraulic Engineering
Volume 129, Issue 5
Abstract
A three-dimensional CFD model was used to compute the formation of the meandering pattern in an initially straight alluvial channel. The numerical model was based on the finite volume method using an unstructured grid with dominantly hexahedral cells. The model was used to predict turbulence and the SIMPLE method was used to compute the pressure. The sediment transport was computed as bed load in addition to solving the convection-diffusion equation for suspended sediment transport. The bed changes were calculated and the grid was altered during the computation as channel erosion and deposition caused wetting and drying. The model was tested by comparing with results from physical model studies carried out at Colorado State Univ., Fort Collins, Colo. The results showed successfully the replication of many of the meander characteristics, including secondary currents, cross-sectional profiles, meander planform, meander wavelength, downstream meander migration, and chute formation.
Get full access to this article
View all available purchase options and get full access to this article.
References
Biswas, R., and Strawn, R. C.(1998). “Tetrahedral and hexahedral mesh adaptation for CFD problems.” Appl. Numer. Math., 26(1–2), 135–151.
Blondeaux, P., and Seminara, G.(1985). “A unified bar-bend theory of river meanders.” J. Fluid Mech., 157, 449–470.
Duan, J. G., Wang, S. S. Y., and Jia, Y(2001). “The application of the enhanced CCHE2D model to study the alluvial channel migration professes.” J. Hydraul. Res., 39(5), 1–12.
Friedkin, J. F. (1945). “A laboratory study of the meandering of alluvial rivers.” U.S. Army Corps of Engineers Waterways Experiment Station, Vicksburg, Miss.
Ikeda, S., Parker, G., and Sawi, K.(1981). “Bend theory of river meanders. I: Linear development.” J. Fluid Mech., 112, 363–377.
Issa, R. I. (1997). Computational fluid dynamics—Post experience course, Imperial College, London.
Kitanidis, P. K., and Kennedy, J. F.(1984). “Secondary currents and river-meander formation.” J. Fluid Mech., 144, 217–229.
Muzaferija, S., and Gosman, D.(1997). “Finite-volume CFD procedure and adaptive error control strategy for grids of adaptive topology.” J. Comput. Phys., 138(2), 766–787.
Odgaard, A. J.(1989). “River-meander model. I: Development.” J. Hydraul. Eng., 115(11), 1433–1450.
Oestberg, J., and Johansson, N. (1992). “Mathematical modelling of flow patterns.” Hydraulic Engineering Software HY-DROSOFT-92, Computational Mechanics Publications, Wessex Institute of Technology, U.K.
Olsen, N. R. B.(1999). “Two-dimensional numerical modelling of flushing processes in water reservoirs.” J. Hydraul. Res., 37(1), 3–16.
Olsen, N. R. B. (2002). “Hydroinformatics, fluvial hydraulics and limnology.” Dept. of Hydraulic and Environmental Engineering, The Norwegian Univ. of Science and Technology, Norway 〈www.bygg.ntnu.no/∼nilsol/sib5050/flures5.pdf〉.
Olsen, N. R. B., and Kjellesvig, H. M.(1998). “Three-dimensional numerical flow modelling for estimation of maximum local scour depth.” J. Hydraul. Res., 36(4), 579–590.
Olsen, N. R. B., and Stokseth, S.(1995). “Three-dimensional numerical modeling of water flow in a river with large bed roughness.” J. Hydraul. Res., 33(4), 571–581.
Patankar, S. V. (1980). Numerical heat transfer and fluid flow, McGraw-Hill Book, New York.
van Rijn, L. C.(1984a). “Sediment transport. I: Bed load transport.” J. Hydraul. Eng., 110(10), 1431–1456.
van Rijn, L. C.(1984b). “Sediment transport. II: Suspended load transport.” J. Hydraul. Eng., 110(11), 1613–1641.
van Rijn, L. C.(1984c). “Sediment transport. III: Bed forms and alluvial roughness.” J. Hydraul. Eng., 110(12), 1733–1754.
Rodi, W. (1980). “Turbulence models and their application in hydraulics.” State-of-the-art paper, Int. Association of Hydraulic Research, Paseo Baja Virgen del Puerto 3, 28005 Madrid, Spain.
Roulund, A. (2000). “Three-dimensional numerical modeling of flow around a bottom mounted pile and its application to scour.” PhD thesis, Dept. of Hydrodynamics and Water Resources, The Technical Univ. of Denmark, Copenhagen, Denmark.
Rouse, H.(1937). “Modern conceptions of the mechanics of fluid turbulence.” Trans. Am. Soc. Civ. Eng., 102, 113–133.
Schumm, S. A., Mosley, M. P., and Weaver, W. E. (1987). Experimental fluvial geomorphology, Wiley, New York.
Shields, A. (1936). “Use of dimensional analysis and turbulence research for sediment transport.” Publication No. 26, Preussen Research Laboratory for Water and Marine Constructions, Berlin (in German).
Wu, W. M., Rodi, W., and Wenka, T.(2000). “3D numerical modeling of flow and sediment transport in open channels.” J. Hydraul. Eng., 126(1), 4–15.
Zimpfer, G. L. (1975). “Development of laboratory river channels.” PhD thesis, Dept. of Earth Resources, Colorado State Univ., Fort Collins, Colo.
Information & Authors
Information
Published In
Copyright
Copyright © 2003 American Society of Civil Engineers.
History
Received: Sep 5, 2001
Accepted: Nov 12, 2002
Published online: Apr 15, 2003
Published in print: May 2003
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.