An Experimental Study on Turbulent Circular Wall Jets
This article has a reply.
VIEW THE REPLYPublication: Journal of Hydraulic Engineering
Volume 128, Issue 2
Abstract
The results of a laboratory investigation on the characteristics of a circular three-dimensional turbulent wall jet are presented. Measurements were performed up to 50 nozzle diameters using a combined Particle Image Velocimetry and Planar Laser Induced Fluorescence approach that captured simultaneously the planar velocity and concentration fields. Both the velocity and concentration profiles exhibited similarity in the streamwise and spanwise directions after sufficient distance from the nozzle. The existence of a secondary mean motion is shown to be responsible for the far greater lateral spread compared to the normal spread for both the momentum and scalar mixing. Using curve fitting, the mean properties of the three-dimensional wall jet are approximated. The consistency of the relationships is further examined based on mass conservation and momentum balance.
Get full access to this article
View all available purchase options and get full access to this article.
References
Abrahamsson, H., Johansson, B., and Löfdahl, L. (1997). “The turbulence field of a fully developed three-dimensional wall jet.” Internal Rep. No. 97/1, Department of Thermo and Fluid Dynamics, Chalmers Univ. of Technology, Göteborg, Sweden.
Chen, C. J., and Jaw, S. Y. (1998). Fundamentals of turbulence modeling, Taylor and Francis, Washington, D.C.
Davis, M. R., and Winarto, H., (1980). “Jet diffusion from a circular nozzle above a solid surface.” J. Fluid Mech., 101(1), 201–221.
Findikakis, Angelos N., and Law, Adrian W. K.(1998). “Marine tailings disposal simulation.” J. Hydraul. Eng., 124(4), 370–383.
Fujisawa, N., and Shirai, H., (1989). “Mean flow and turbulence characteristics of three-dimensional wall jet along plane surface.” Trans. Jpn. Soc. Aero. Space Sci., 32(95), 35–46.
Herlina. (2000). “Mixing of Wall Jets and Gravity Plumes.” M Eng thesis, Nanyang Technological Univ., Singapore.
Launder, B. E., and Rodi, W. (1983). “The turbulent wall jet, measurements and modelling.” Annu. Rev. Fluid Mech., 429–459.
Law, A. W. K., and Wang, H. W.(2000). “Measurements of Mixing Processes using Combined PIV and PLIF.” J. Experimental Thermal and Fluid Science, 22(3–4), 213–229.
Padmanabham, G., and Gowda, B. H. L.(1991). “Mean and turbulence characteristics of a class of three-dimensional wall jets-Part 1: Mean flow characteristics.” J. Fluids Eng., 113, 620–628.
Rajaratnam, N., and Pani, B. S.(1974). “Three-dimensional turbulent wall jets.” J. Hydraul. Div., Am. Soc. Civ. Eng., 100(1), 69–83.
Schlichting, H. (1979). Boundary-layer theory, translated by J. Kestin, McGraw-Hill, New York.
Sforza, P. M., and Herbst, G.(1970). “A study of three-dimensional incompressible, turbulent wall jets.” AIAA J., 8(2), 276–283.
Sobey, R. J., Johnston, A. J., and Keane, R. D.(1988). “Horizontal Round Buoyant Jet in Shallow Water.” J. Hydraul. Eng., 114(8), 910–929.
Verhoff, A. (1963). “The two-dimensional turbulent wall jet with and without an external stream.” Rep. No. 626, Princeton Univ., Princeton, N.J.
Wang, H. W. (2000). “Investigation of buoyant jet discharges with combined PIV and PLIF.” PhD thesis, Nanyang Technological Univ., Singapore.
Information & Authors
Information
Published In
Copyright
Copyright © 2002 American Society of Civil Engineers.
History
Received: Mar 31, 2000
Accepted: May 10, 2001
Published online: Feb 1, 2002
Published in print: Feb 2002
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.