Bed-Form Geometry in Sand-Bed Flows
This article has a reply.
VIEW THE REPLYPublication: Journal of Hydraulic Engineering
Volume 125, Issue 12
Abstract
A new method is proposed for predicting relative bed-form height h/d in sand-bed flows. The proposed method is based on the concept of relating energy loss due to form drag to the head loss across a sudden expansion in open channel flows. A unique feature of the proposed method is that it can be applied to various bed forms, i.e., ripples, dunes, antidunes/standing waves, and transitional bed regimes that occur in alluvial flows. The relation thus developed was applied to a large number (251 flows, 14 different data sets) of laboratory and river data, and was found to give good agreement with the observed h/d values. In a comparison of prediction accuracies with seven existing relationships, the proposed method was found to give significantly better agreements with the observed data. Future improvements in the prediction of h/d will depend on improved formulations of the two parameters incorporated in the present relation, i.e., energy loss coefficient K, and the relative bed-form length L/d for various bed configurations. More research is needed to develop better formulations for these parameters.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Adriaanse, M. ( 1986). “De ruwheid van de Bergsche Maas bij hoge afvoeren.” Rijkswaterstaat, RIZA, Nota 86.19, Aug. (in Dutch).
2.
Allen, J. R. L. (1978). “Computational methods for dune time-lag: Calculations using Stein's rule for dune height.” Sedimentary Geol., 20(3), 165–216.
3.
Brater, E. F., and King, H. W. (1976). Handbook of hydraulics. McGraw-Hill, New York.
4.
Fredsoe, J. (1982). “Shape and dimensions of stationary dunes in rivers.”J. Hydr. Div., ASCE, 108(8), 932–947.
5.
Guy, H. P., Simons, D. B., and Richardson, E. V. ( 1966). “Summary of alluvial channel data from flume experiments, 1956–61.” Geological Survey Profl. Paper 462-I, U.S. Department of the Interior, Washington, D.C.
6.
Haque, M. I., and Mahmood, K. (1985). “Geometry of ripples and dunes.”J. Hydr. Engrg., ASCE, 111(1), 48–63.
7.
Haque, M. I., and Mahmood, K. (1987). “Sediment convection-diffusion and bed form length.”J. Hydr. Engrg., ASCE, 113(11), 1381–1401.
8.
Julien, P. Y. (1992). “Study of bedform geometry in large rivers.” Rep. No. Q1386, Delft Hydraulics, Emmeloord, The Netherlands.
9.
Julien, P. Y., and Klaassen, G. J. (1995). “Sand-dune geometry of large rivers during floods.”J. Hydr. Engrg., ASCE, 121(9), 657–663.
10.
Karim, F. (1995). “Bed configuration and hydraulic resistance in alluvial-channel flows.”J. Hydr. Engrg., ASCE, 121(1), 15–25.
11.
Karim, F. (1998). “Bed material discharge prediction for nonuniform sediments.”J. Hydr. Engrg., ASCE, 124(6), 597–604.
12.
Kennedy, J. F. (1963). “The mechanics of dunes and antidunes in erodible-bed channels.” J. Fluid Mech., 16(4), 521–544.
13.
Kennedy, J. F., and Odgaard, A. J. (1990). “An informal monograph on riverine sand dunes.” IIHR Ltd. Distribution Rep. No. 169, Iowa Inst. of Hydr. Res., University of Iowa, Iowa City, Iowa.
14.
Mahmood, K., et al. (1979). “Selected equilibrium-state data from ACOP canals.” Rep. No. EWR 79-2, Envir. and Water Resour. Program, George Washington University, Washington, D.C.
15.
Peters, J. J. (1978). “Discharge and sand transport in the braided zone of the Zaire estuary.” Netherlands J. of Sea Res., 12(3/4), 273–292.
16.
Ranga Raju, K. G., and Soni, J. P. (1976). “Geometry of ripples and dunes in alluvial channels.”J. Hydr. Res., Delft, The Netherlands, 14(3).
17.
Raudkivi, A. J. (1997). “Ripples on stream bed.”J. Hydr. Engrg., ASCE, 123(1), 58–64.
18.
Shen, H. W., Fehlman, H. M., and Mendoza, C. (1990). “Bed form resistance in open channel flows.”J. Hydr. Engrg., ASCE, 116(6), 799–815.
19.
Shen, H. W., Mellema, W. J., and Harrison, A. S. (1978). “Temperature and Missouri River stages near Omaha.”J. Hydr. Div., ASCE, 104(1), 1–20.
20.
Van Rijn, L. C. (1982). “The prediction of bed forms, alluvial roughness and sediment transport.” Res. Rep. S487, part III, Delft Hydraulics Laboratory, Delft, The Netherlands.
21.
Van Rijn, L. C. (1984). “Sediment transport, part III: Bed forms and alluvial roughness.”J. Hydr. Engrg., ASCE, 110(12), 1733–1754.
22.
Yalin, M. S. (1964). “Geometrical properties of sand waves.”J. Hydr. Div., ASCE, 90(5).
23.
Yalin, M. S. (1985). “On the determination of ripple geometry.”J. Hydr. Engrg., ASCE, 111(8), 1148–1155.
Information & Authors
Information
Published In
History
Received: Apr 28, 1998
Published online: Dec 1, 1999
Published in print: Dec 1999
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.