Discussion of “Improved Design Procedures for Vertically Loaded H‐Piles in Sand” by H. M. Coyle and R. Ungaro (March, 1991, Vol. 117, No. 3)
This article has a reply.
VIEW THE REPLYPublication: Journal of Geotechnical Engineering
Volume 118, Issue 7
![First page of PDF](/cms/10.1061/(ASCE)0733-9410(1992)118:7(1133.2)/asset/be2de852-7c73-4f8c-afd3-17950d2fa4dc/assets/(asce)0733-9410(1992)118:7(1133.2).fp.png)
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Bowles, J. E. (1988). Foundation analysis and design, 4th Ed., McGraw‐Hill Book Co., Inc., New York, N.Y.
2.
Chin, F. K. (1971). “Discussion of ‘Pile test, Arkansas River project.’” Soil Mech. and Found. Div., ASCE, 97(6), 930–932.
3.
Conroy, P. J. (1987). “The analyses of pile load tests performed on H‐piles driven into alluvial sands,” MSc thesis, Oklahoma State University, Stillwater, Okla.
4.
Das, B. M. (1990). Principles of foundation engineering, 2nd Ed., PWS‐Kent Publishing Co., Boston, Mass.
5.
Davisson, M. T. (1972). “High capacity piles.” Proc., Lecture Series on Innovations in Found. Constr., ASCE, New York, N.Y., 81–90.
6.
Finno, R. J., Cosamo, T., and Gitskin, B. (1989). “Results of foundation engineering congress pile load tests.” Predicted and observed behavior of piles; ASCE Geotechnical Special Publication No. 23, ASCE, New York, N.Y., 338–355.
7.
Kulhawy, F. H. (1984). “Limiting tip and side resistance: Fact or fallacy?” Symp. on Analysis and Design of Pile Found., ASCE, New York, N.Y., 80–98.
8.
Meyerhof, G. G. (1956). “Penetration tests and bearing capacity of cohesionless soils.” J. Soil Mech. and Found. Div., ASCE, 82(1), 1–19.
9.
Peck, R. B., Hanson, W. E., and Thornburn, T. H. (1953). Foundation engineering, 1st Ed., John Wiley and Sons, New York, N.Y.
10.
Peck, R. B., Hanson, W. E., and Thornburn, T. H. (1974). Foundation engineering, 2nd Ed., John Wiley and Sons, New York, N.Y.
11.
Schmertmann, J. H. (1975). “The measurement of in‐situ strength.” Proc., ASCE Specialty Conf. on In‐Situ Measurement of Soil Properties, New York, N.Y., vol. 2, 57–138.
12.
Terzaghi, K., and Peck, R. B. (1948). Soil mechanics in engineering practice, 1st Ed., John Wiley and Sons, New York, N.Y.
13.
Van der Veen, C. (1953). “The bearing capacity of a pile.” Proc., 3rd Int. Conf. on Soil Mech. and Found. Engrg., ICOSOMEF, Zurich, Switzerland, vol. 2, 84–90.
14.
Wolff, T. F. (1989). “Pile capacity prediction using parameter functions.” Predicted and observed behavior of piles, ASCE Geotechnical Special Publication No. 23, ASCE, New York, N.Y., 96–106.
Information & Authors
Information
Published In
Copyright
Copyright © 1992 ASCE.
History
Published online: Jul 1, 1992
Published in print: Jul 1992
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.