Implicit Scheme for Estuarine Water-Quality Models
This article has a reply.
VIEW THE REPLYPublication: Journal of Environmental Engineering
Volume 122, Issue 1
Abstract
Explicit integration schemes used in many water-quality models often require small time steps to satisfy stability criteria. In this paper, we demonstrate an implicit scheme, which is unconditionally stable regardless of the time-step size, for a two-dimensional box model configuration. The scheme is used with an alternating direction implicit (ADI) solution technique, which integrates the box-model mass balance equations in the longitudinal direction over the first half time step, and in the vertical direction over the next half time step. It has been successfully applied to the Patuxent Estuary water quality model with significantly reduced computational effort.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Abbott, M. B. and Basco, D.R. (1989). Computational fluid dynamics: an introduction for engineers . John Wiley & Sons, Inc., New York, N.Y., 86–88.
2.
Ambrose, R. B., Hill, S. I., and Mulkey, L. A. (1983). “User's manual for the chemical transport and fate model (TOXIWASP); Version 1.”EPA-600/3-83-005, Envir. Protection Agency, Washington, D.C.
3.
Cerco, C. F., Chapman R. S., and Cole, T. (1992). “A workshop on the Chesapeake Bay eutrophication model CE-QUAL-ICM.” EPA Chesapeake Bay.
4.
Di Toro, D. M., Fitzpatrick, J. J., and Thomann, R. V. (1983). “Documentation for water quality analysis simulation program (WASP) and model verification program (MVP).”EPA/600/3-81-044, Envir. Protection Agency, Washington, D.C.
5.
Di Toro, D. M. and Fitzpatrick, J. J. (1993). “Chesapeake Bay Sediment Flux Model.”Contract Rep. EL-93-2, by HydroQual, Inc. for Army Corps of Engineers, Baltimore District, Baltimore, Md.
6.
HydroQual, Inc. (1987). “Development of a coupled hydrodynamic/water quality model of the eutrophication and anoxia processes of the Chesapeake Bay.”Rep., Submitted to U.S. EPA Chesapeake Bay Program, Annapolis, Md.
7.
Leonard, B. P.(1979). “A stable and accurate convection modelling procedure based on quadratic upstream interpolation.”Comp. Meth. in Appl. Mech. and Engrg., 19, 59–98.
8.
Lung, W. S. (1992a). “A water quality model for the Patuxent Estuary.”Envir. Engrg. Res. Rep. No. 8, Univ. of Virginia, Dept. of Civ. Engrg., Charlottesville, Va.
9.
Lung, W. S. (1992b). “Modeling sediment-water interactions in the Patuxent Estuary.”Envir. Engrg. Res. Rep. No. 11, Univ. of Virginia, Dept. of Civ. Engrg., Charlottesville, Va.
10.
Lung, W. S., and Hwang, C. C. (1989). “Integrating hydrodynamic and water quality models for the Patuxent Estuary.”Estuarine and Coast. Modeling, ASCE, New York, N.Y., 420–429.
11.
Lung, W. S., and O'Connor, D. J.(1984). “Two-dimensional mass transport in estuaries.”J. Hydr. Engrg., 110(10), 1340–1357.
12.
Lung, W. S., and Paerl, H. W.(1988). “Modeling blue-green algal blooms in the lower Neuse River.”Water Res., 22(7), 895–905.
13.
Peaceman, D. W., and Rachford, H. H.(1955). “The numerical solution of parabolic and elliptic differential equations.”J. Soc. Indust. Appl. Math., 3, 28–41.
14.
Thomann, R. V., Mueller, J. A., Winfield, R. P., and Huang, C. R.(1991). “Model of fate and accumulation of PCB homologues in Hudson Estuary.”J. Envir. Engrg., 117(2), 161–178.
15.
Thomann, R. V., Merklin, W., and Wright, B.(1993). “Modeling cadmium fate at a superfund site: impact of bioturbation.”J. Envir. Engrg., ASCE, 119(3), 424–442.
16.
Thomann, R. V., and Fitzpatrick J. J. (1982). “Calibration and verification of the Potomac Estuary model.”Final Rep., HydroQual, Inc., Prepared for the Department of Enviromental Services, Washington, D.C.
Information & Authors
Information
Published In
Copyright
Copyright © 1996 American Society of Civil Engineers.
History
Published online: Jan 1, 1996
Published in print: Jan 1996
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.