Experimental Assessment of Hydrodynamic Coefficients for a Heave Plate Executing Pitch Oscillations
Publication: Journal of Waterway, Port, Coastal, and Ocean Engineering
Volume 148, Issue 1
Abstract
A submerged oscillating heave plate is utilized as a mechanism in some marine structures for vibration reduction. Quantifying the hydrodynamic properties in axial (heave) oscillations has been extensively archived in published research. However, the rotational hydrodynamic properties of an isolated plate under forced oscillation have not been investigated, which may be of relevance when such structures undergo roll or pitch oscillations. This paper reports on an experimental study that aims to find the trends of the rotational hydrodynamic coefficients versus vibration amplitude for an isolated disk. Furthermore, formulae for nondimensional rotational coefficients based on empirical fits to experimental data will help to generalize these coefficients to full scale. The experimental tests were conducted in two sets. In the first set, disks of different sizes were excited in rotation around their central axis, whereas in the second set the disks were oscillated at a distance from the rotational axis. Generally and in accordance with results for heave oscillations, the results of the hydrodynamic coefficients show an increasing linear trend versus vibration amplitude.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Damage data that support the findings of this study may be available from the corresponding author upon reasonable request.
Acknowledgments
The authors appreciate the support of Crosby Hall in the Mechanical Engineering department at the University of Maine and its Manager, Stephen Abbadessa. The authors also express their gratitude to Mr. Jeffrey Pass and Michael Choiniere, for their assistance in a technical part of this research. This research was conducted with partial support provided by the Ministry of Science, Research, and Technology of Iran.
References
Abazari, A. 2019. “Investigation of hydrodynamic coefficients of array of heave plates under translational and rotational oscillations.” Ph.D. thesis, Dept. of Mechanical Engineering, Sharif Univ. of Technology.
Abazari, A., M. Alvandi, M. Behzad, and K. P. Thiagarajan. 2021. “Vortex shedding modes around oscillating non-uniform double heave plates.” Proc. Inst. Mech. Eng., Part M: J. Eng. Marit. Environ. 235 (2): 558–569. https://doi.org/10.1177/1475090220966910.
Abazari, A., M. Behzad, and K. P. Thiagarajan. 2020a. “Hydrodynamic performance of multiple co-axial heave plates with different diameters.” Ships Offshore Struct. 15 (4): 380–392. https://doi.org/10.1080/17445302.2019.1625109.
Abazari, A., M. Behzad, and K. P. Thiagarajan. 2020b. “Hydrodynamic damping enhancement by implementing a novel combined rigid-elastic heave plate.” J. Mar. Sci. Technol. 26: 216–232. https://doi.org/10.1007/s00773-020-00732-7.
Bezunartea-Barrio, A., S. Fernandez-Ruano, A. Maron-Loureiro, E. Molinelli-Fernandez, F. Moreno-Buron, J. Oria-Escudero, J. Rios-Tubio, C. Soriano-Gomez, A. Valea-Peces, and C. Lopez-Pavon. 2020. “Scale effects on heave plates for semi-submersible floating offshore wind turbines: Case study with a solid plain plate.” J. Offshore Mech. Arct. Eng. 142 (3): 031105. https://doi.org/10.1115/1.4045374.
Deng, R., W. Duan, S. Ma, and Y. Ma. 2015. “Numerical research of the viscous effect of the bilge keel on the damping moment.” Polish Marit. Res. 22 (s1): 67–74. https://doi.org/10.1515/pomr-2015-0035.
Irkal, M. A. K., S. Nallayarasu, and S. K. Bhattacharyya. 2016. “CFD approach to roll damping of ship with bilge keel with experimental validation.” Appl. Ocean Res. 55: 1–17. https://doi.org/10.1016/j.apor.2015.11.008.
Irkal, M. A. R., S. Nallayarasu, and S. K. Bhattacharyya. 2019. “Numerical prediction of roll damping of ships with and without bilge keel.” Ocean Eng. 179: 226–245. https://doi.org/10.1016/j.oceaneng.2019.03.027.
ITTC. 2008. Guide to the expression of uncertainty in experimental hydrodynamics. Singapore: ITTC.
Jiang, Y., and R. W. Yeung. 2017. “Bilge-Keel influence on free decay of roll motion of a realistic hull.” J. Offshore Mech. Arct. Eng. 139 (4): 041801. https://doi.org/10.1115/1.4036326.
Kianejad, S. S., J. Lee, Y. Liu, and H. Enshaei. 2018. “Numerical assessment of roll motion characteristics and damping coefficient of a ship.” J. Mar. Sci. Eng. 6 (3): 101. https://doi.org/10.3390/jmse6030101.
Lamb, S. H. 1979. Hydrodynamics. Cambridge, UK: University Press.
Lopez-Pavon, C., and A. Souto-Iglesias. 2015. “Hydrodynamic coefficients and pressure loads on heave plates for semi-submersible floating offshore wind turbines: A comparative analysis using large scale models.” Renewable Energy 81: 864–881. https://doi.org/10.1016/j.renene.2015.04.003.
Mello, P. C., E. B. Malta, R. O. da Silva, M. H. Candido, L. H. S. do Carmo, I. F. Alberto, G. R. Franzini, A. N. Simos, H. Suzuki, and R. T. Gonçalves. 2020. “Influence of heave plates on the dynamics of a floating offshore wind turbine in waves.” J. Mar. Sci. Technol. 26: 190–200. https://doi.org/10.1007/s00773-020-00728-3.
Moreno, J., M. Cameron, K. P. Thiagarajan, and C. A. G. Mendoza. 2015. “Hydrodynamic performance of heave plates on floating offshore wind turbine platforms.” In Proc., 25th Int. Offshore and Polar Engineering Conf., 408–414. Mountain View, CA: International Society of Offshore and Polar Engineers.
Nallayarasu, S., and T. P. Mathai. 2016. “Effect of Mathieu instability on motion response of Spar hull with heave damping plate.” Ships Offshore Struct. 11 (8): 833–846. https://doi.org/10.1080/17445302.2015.1073866.
Nallayarasu, S., R. Sreeraj, and M. Murali. 2014. “Effect of hull geometry on the hydrodynamic response of spar in regular waves.” Ships Offshore Struct. 9 (1): 22–37. https://doi.org/10.1080/17445302.2012.704172.
Sarpkaya, T., and M. Isaacson. 1981. Mechanics of wave forces on offshore structures. New York: Van Nostrand Reinhold.
Tao, L., and D. Dray. 2008. “Hydrodynamic performance of solid and porous heave plates.” Ocean Eng. 35 (10): 1006–1014. https://doi.org/10.1016/j.oceaneng.2008.03.003.
Tao, L., K. Y. Lim, and K. Thiagarajan. 2004. “Heave response of classic spar with variable geometry.” J. Offshore Mech. Arct. Eng. 126 (1): 90–95. https://doi.org/10.1115/1.1643085.
Tao, L., B. Molin, Y.-M. Scolan, and K. Thiagarajan. 2007. “Spacing effects on hydrodynamics of heave plates on offshore structures.” J. Fluids Struct. 23 (8): 1119–1136. https://doi.org/10.1016/j.jfluidstructs.2007.03.004.
Thiagarajan, K. P., and E. C. Braddock. 2010. “Influence of bilge keel width on the roll damping of FPSO.” J. Offshore Mech. Arct. Eng. 132 (1): 011303. https://doi.org/10.1115/1.3160384.
Thiagarajan, K. P., and A. W. Troesch. 1998. “Effects of appendages and small currents on the hydrodynamic heave damping of TLP columns.” J. Offshore Mech. Arct. Eng. 120 (1): 37–42. https://doi.org/10.1115/1.2829518.
Tian, X., L. Tao, X. Li, and J. Yang. 2017. “Hydrodynamic coefficients of oscillating flat plates at 0.15 ⩽ KC ⩽ 3.15.” J. Mar. Sci. Technol. 22 (1): 101–113. https://doi.org/10.1007/s00773-016-0401-2.
Wang, B., Z. Xu, C. Li, D. Wang, and Q. Ding. 2020. “Hydrodynamic characteristics of forced oscillation of heave plate with fractal characteristics based on floating wind turbine platform.” Ocean Eng. 212: 107621. https://doi.org/10.1016/j.oceaneng.2020.107621.
Yang, J., X. Tian, and X. Li. 2014. “Hydrodynamic characteristics of an oscillating circular disk under steady in-plane current conditions.” Ocean Eng. 75: 53–63. https://doi.org/10.1016/j.oceaneng.2013.11.011.
Yue, M., Q. Liu, C. Li, Q. Ding, S. Cheng, and H. Zhu. 2020. “Effects of heave plate on dynamic response of floating wind turbine Spar platform under the coupling effect of wind and wave.” Ocean Eng. 201: 107103. https://doi.org/10.1016/j.oceaneng.2020.107103.
Zhang, S., and T. Ishihara. 2019. “Numerical study of distributed hydrodynamic forces on a circular heave plate by large-eddy simulations with volume of fluid method.” Ships Offshore Struct. 15 (6): 574–586. https://doi.org/10.1080/17445302.2019.1661630.
Zhu, L., and H.-C. Lim. 2017. “Hydrodynamic characteristics of a separated heave plate mounted at a vertical circular cylinder.” Ocean Eng. 131: 213–223. https://doi.org/10.1016/j.oceaneng.2017.01.007.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Dec 28, 2020
Accepted: Aug 13, 2021
Published online: Sep 24, 2021
Published in print: Jan 1, 2022
Discussion open until: Feb 24, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Masoud Hayatdavoodi, Yongbo Chen, Binbin Zhao, R. Cengiz Ertekin, Experiments and computations of wave-induced oscillations of submerged horizontal plates, Physics of Fluids, 10.1063/5.0132569, 35, 1, (017121), (2023).
- M.M. Aziminia, A. Abazari, M. Behzad, M. Hayatdavoodi, Stability analysis of parametric resonance in spar-buoy based on Floquet theory, Ocean Engineering, 10.1016/j.oceaneng.2022.113090, 266, (113090), (2022).