Assessment of Monopile-Gravel Wheel Foundations under Lateral-Moment Loading for Offshore Wind Turbines
Publication: Journal of Waterway, Port, Coastal, and Ocean Engineering
Volume 145, Issue 1
Abstract
This paper evaluates the lateral performance of a monopile reinforced by a gravel wheel for offshore structures via centrifuge tests and three-dimensional finite-element (FE) modelings. The gravel wheel comprises a ring frame placed on the pile head and filled with large particles to potentially utilize gravel or crushed stone in offshore areas. The results of centrifuge tests and FE analyses demonstrate that the lateral loading capacity of the monopile increases when combined with a gravel wheel, and the improvement depends on the diameter and thickness of the wheel. By means of FE methods, the interaction between the pile and surrounding soils and gravel fill are illustrated to explain how the gravel wheel contributes to the lateral resistance of the hybrid system. Furthermore, an equivalent layer method adopting the conventional p-y curves is suggested to predict the lateral response of the hybrid foundation. This method is validated by comparisons with the centrifuge tests results. Finally, a case study of the monopile-gravel wheel foundation indicates that the gravel wheel is less efficient in configurations where the ultimate capacity of the hybrid system is dictated by the bending capacity of structures rather than the strengths of soils.
Get full access to this article
View all available purchase options and get full access to this article.
References
Anastasopoulos, I., and M. Theofilou. 2016. “Hybrid foundation for offshore wind turbines: Environmental and seismic loading.” Soil Dyn. Earthquake Eng. 80: 192–209. https://doi.org/10.1016/j.soildyn.2015.10.015.
API (American Petroleum Institute). 2007. American Petroleum Institute recommended practice for planning, designing and constructing fixed offshore platforms—Working stress design. RP2A-WSD. Washington, DC: API.
Arshi, H., and K. Stone. 2012. “Lateral resistance of hybrid monopile-footing foundations in cohesionless soils for offshore wind turbines.” In Proc., of the 7th Intl. Conf. on Offshore Site Investigation and Geotechnics, 519–526. London: Society of Underwater Technology.
Arshi, H., K. Stone, and F. Gunzel. 2015. “Cost efficient design of monopile foundations for offshore wind turbines.” In Proc., 16th European Conf. on Soil Mechanics and Geotechnical Engineering: Geotechnical Engineering for Infrastructure Development. Edinburg, Scotland: London, UK: ICE publishing.
Bolton, M. 1986. “The strength and dilatancy of sands.” Géotechnique 36 (1): 65–78. https://doi.org/10.1680/geot.1986.36.1.65.
Broms, B. B. 1964. “Lateral resistance of piles in cohesive soils.” J. Soil Mech. Found. Div. 90 (2): 27–64.
Byrne, B., and G. Houlsby. 2003. “Foundations for offshore wind turbines.” Philos. Trans. R. Soc. London, Ser. A 361 (1813): 2909–2930. https://doi.org/10.1098/rsta.2003.1286.
Chakraborty, T., and R. Salgado. 2010. “Dilatancy and shear strength of sand at low confining pressures.” J. Geotech. Geoenviron. Eng. 136 (3): 527–532. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000237.
DNV. 2013. Design of offshore wind turbine structures. Standard DNV-OSJ101. Det Norske Veritas AS (DNV). Oslo, Norway: DNV.
El-Marassi, M. 2011. “Investigation of hybrid monopile-footing foundation systems subjected to combined loading.” Ph.D. dissertation, The Univ. of Western Ontario.
Figueroa, J., A. Saada, H. Dief, and C. Dietz. 1998. “Development of the geotechnical centrifuge at Case Western Reserve Univ.” In Proc., Int. Conf.: Centrifuge, 3–9. Tokyo: A. A. Balkema.
Fioravante, V. 2002. “On the shaft friction modelling of non-displacement piles in sand.” Soils Found. 42 (2): 23–33. https://doi.org/10.3208/sandf.42.2_23.
Fleming, K., A. Weltman, M. Randolph, and K. Elson. 2008. Piling engineering. Boca Raton, FL: CRC Press.
Hibbit, K. 2007. Sorensen, ABAQUS/standard analysis user’s manual. Providence, RI: Hibbit, Karlsson and Sorensen, Inc.
ISO (International Organization for Standardization). 2007. Petroleum and natural gas industries-Fixed steel offshore structures. ISO 19902. Geneva: ISO.
Koloski, J. W., S. D. Schwarz, and D. W. Tubbs. 1989. “Geotechnical properties of geologic materials.” Eng. Geol. Washington. 1: 19–24.
Lehane, B., B. Pedram, J. Doherty, and W. Powrie. 2014. “Improved performance of monopiles when combined with footings for tower foundations in sand.” J. Geotech. Geoenviron. Eng. 140 (7): 04014027. https://doi.org/10.1061/(ASCE)GT.1943-5606.0001109.
Lehane, B., W. Powrie, and J. Doherty. 2010. “Centrifuge model tests on piled footings in clay for offshore wind turbines.” In Proc., Intl. Conf. in Physical Modelling in Geotechnics, ICPMG2010. Rotterdam, Netherlands: Balkema.
Lemnitzer, A., E. R. Ahlberg, R. L. Nigbor, A. Shamsabadi, J. W. Wallace, and J. P. Stewart. 2009. “Lateral performance of full-scale bridge abutment wall with granular backfill.” J. Geotech. Geoenviron. Eng. 135 (4): 506–514. https://doi.org/10.1061/(ASCE)1090-0241(2009)135:4(506).
Li, J., and X. Yu. 2015. “Model and procedures for reliable near-term wind energy production forecast.” Wind Eng. 39 (6): 595–607. https://doi.org/10.1260/0309-524X.39.6.595.
Liu, R., L. Zhou, J.-j. Lian, and H.-y. Ding. 2015. “Behavior of monopile foundations for offshore wind farms in sand.” J. Waterway, Port, Coastal, Ocean Eng. 142 (1): 04015010. https://doi.org/10.1061/(ASCE)WW.1943-5460.0000312.
Ljjj, L., and H. Gravesen. 2008. “Kriegers Flak Offshore Wind Farm-design basis foundations.” Vattenfall Vindkraft AB.
McClelland, B., and J. A. Focht. 1958. “Soil modulus for laterally loaded piles.” Trans. ASCE 123 (1): 1049–1063.
Meyerhof, G. G. 1995. “Development of geotechnical limit state design.” Can. Geotech. J. 32 (1): 128–136. https://doi.org/10.1139/t95-010.
Musial, W., P. Beiter, P. Schwabe, T. Tian, T. Stehly, P. Spitsen, A. Robertson, and V. Gevorgian. 2017. 2016 offshore wind technologies market. Rep. No. NREL/TP-5000-68587; DOE/GO-102017-5031. Golden, CO: National Renewable Energy Laboratory (NREL).
O’Neill, M. W., and J. M. Murchison. 1983. An evaluation of p-y relationships in sands. Houston: Univ. of Houston.
Pepper, L. 2001. Monitoring and evaluation of Blyth offshore wind farm. ETSU-W-35-00563/Rep/1, 686. London: Dept. of Trade and Industry.
Prasad, Y. V., and T. Chari. 1999. “Lateral capacity of model rigid piles in cohesionless soils.” Soils and Found. 39 (2): 21–29. https://doi.org/10.3208/sandf.39.2_21.
Reese, L. C. 1984. Handbook on design of piles and drilled shafts under lateral load. Rep. Austin, TX: Geotechnical Engineering Center, Bureau of Engineering Research, Univ. of Texas at Austin.
Reese, L. C., W. R. Cox, and F. D. Koop. 1974. “Analysis of laterally loaded piles in sand.” In Proc., 6th Annual Offshore Technol. Conf. OTC 2080, 473–483. Houston: Offshore Technology Conference.
Rollins, K. M., and R. T. Cole. 2006. “Cyclic lateral load behavior of a pile cap and backfill.” J. Geotech. Geoenviron. Eng. 132 (9): 1143–1153. https://doi.org/10.1061/(ASCE)1090-0241(2006)132:9(1143).
Schanz, T., and P. Vermeer. 1998. “On the stiffness of sands.” Géotechnique 48: 383–387.
Stone, K., T. Newson, and J. Sandon. 2007. “An investigation of the performance of a ‘hybrid’ monopile-footing foundation for offshore structures.” In Proc., 6th Int. Offshore Site Investigation and Geotechnics Conf.: Confronting New Challenges and Sharing Knowledge, 391–396. London: Society of Underwater Technology.
Vermeer, P. 2001. “On single anchored retaining walls.” Plaxis Bulletin. 10.
Vermeer, P. A., and R. De Borst. 1984. “Non-associated plasticity for soils, concrete and rock.” HERON 29 (3): 5–64.
Wang, X., X. Yang, and X. Zeng. 2017. “Centrifuge modeling of lateral bearing behavior of offshore wind turbine with suction bucket foundation in sand.” Ocean Eng. 139: 140–151. https://doi.org/10.1016/j.oceaneng.2017.04.046.
Wang, X., X. Zeng, J. Li, and X. Yang. 2018a. “Lateral bearing capacity of hybrid monopile-friction wheel foundation for offshore wind turbines by centrifuge modelling.” Ocean Eng. 148: 182–192. https://doi.org/10.1016/j.oceaneng.2017.11.036.
Wang, X., X. Zeng, J. Li, X. Yang, and H. Wang. 2018b. “A review on recent advancements of substructures for offshore wind turbines.” Energy Convers. Manage. 158: 103–119. https://doi.org/10.1016/j.enconman.2017.12.061.
Wang, X., X. Zeng, X. Yang, and J. Li. 2018c. “Feasibility study of offshore wind turbines with hybrid monopile foundation based on centrifuge modeling.” Appl. Energy 209: 127–139. https://doi.org/10.1016/j.apenergy.2017.10.107.
Wu, M., X. D. Fu, T. D. Xia, D. X. Xu, J. Wang, and Y. M. Liu. 2006. “Comparison between unconsolidated undrained simple and direct shear tests on compacted soil.” Chinese J. Rock Mech. Eng. 25 (2): 4148–4152. http://en.cnki.com.cn/Article_en/CJFDTOTAL-YSLX2006S2125.htm.
Yang, X., X. Wang, and X. Zeng. 2017. “Numerical simulation of the lateral loading capacity of a bucket foundation.” Geotech. Frontiers 2017: 112–121. https://doi.org/10.1061/9780784480465.012.
Zhang, P., H. Ding, and C. Le. 2013. “Installation and removal records of field trials for two mooring dolphin platforms with three suction caissons.” J. Waterway, Port, Coastal, Ocean Eng. 139 (6): 502–517. https://doi.org/10.1061/(ASCE)WW.1943-5460.0000206.
Zhu, B., Y. Sun, R. Chen, W. Guo, and Y. Yang. 2015. “Experimental and analytical models of laterally loaded rigid monopiles with hardening p–y curves.” J. Waterway, Port, Coastal, Ocean Eng. 141 (6): 04015007. https://doi.org/10.1061/(ASCE)WW.1943-5460.0000310.
Zhu, B., Z-j Zhu, T. Li, J-c Liu, and Y-f Liu. 2017. “Field tests of offshore driven piles subjected to lateral monotonic and cyclic loads in soft clay.” J. Waterway, Port, Coastal, Ocean Eng. 143 (5): 05017003. https://doi.org/10.1061/(ASCE)WW.1943-5460.0000399.
Information & Authors
Information
Published In
Copyright
© 2018 American Society of Civil Engineers.
History
Received: Mar 15, 2018
Accepted: Jul 9, 2018
Published online: Nov 1, 2018
Published in print: Jan 1, 2019
Discussion open until: Apr 1, 2019
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.