Settling Mechanism for Ternary-Type Geocontainers Dumped from a Bevel
Publication: Journal of Waterway, Port, Coastal, and Ocean Engineering
Volume 143, Issue 5
Abstract
Geocontainers have been increasingly used in various estuarine and coastal engineering projects. However, it is difficult to determine the horizontal settling distances of geocontainers when they are dumped into deep water. Three new types of geocontainers were proposed on the basis of a unitary geocontainer. Type-selection and parameter-screening experiments were conducted in a flume to determine the optimal type of geocontainer and its optimal parameter combination. Based on the optimal parameter combination, a regularity experiment was conducted under 25 different water depth and flow velocity conditions to determine the settling mechanism of the optimal type of geocontainer. Last, empirical formulas were proposed for evaluating the drag and lift coefficients, and the horizontal settling trajectories of the optimal type of geocontainer were calculated. The results of these experiments confirm the ternary-type geocontainer as the optimal type of geocontainer, and the standard deviation of the settling distances was smallest when the dimensions were D × B = 16 × 12 cm. The filling ratio φ was 78.54%, the sliding distance L was 5 cm, and the bevel angle α was 40°.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This study was financed by the National Natural Science Foundation of China (Grant NNSFC-51114111) and supported by the Fundamental Research Funds for the Central Universities (Grant 2015B32614). Their support is gratefully acknowledged.
References
Bezuijen, A., De Groot, M. B., Breteler, M. K., and Berendsen, E. (2004). “Placing accuracy and stability of geocontainers.” Proc., 3rd European Geosynthetics Conf. EuroGeo3, German Geotechnical Society, Munich, Germany.
Bowles, F. A., and Fleischer, P. (1999). “Dewatering of geotextile fabric containers upon impact with the sea floor: Environmental monitoring implications.” Mar. Pollut. Bull., 38(9), 791–794.
Chu, J., Yan, S. W., and Li, W. (2012). “Innovative methods for dike construction—An overview.” Geotext. Geomembr., 30, 35–42.
das Neves, L., Moreira, A., Taveira-Pinto, F., Lopes, M. L., and Veloso-Gomes, F. (2015). “Performance of submerged nearshore sand-filled geosystems for coastal protection.” Coastal Eng, 95, 147–159.
Elkholy, M., and Chaudhry, M. (2011). “Drag and added-mass coefficients of large sandbags.” J. Hydraul. Eng., 1441–1451.
Elkholy, M., and Chaudhry, M. (2012). “Investigations on the trajectory of large sandbags in open channel flow.” J. Hydraul. Eng., 1060–1068.
Fowler, J., Duke, M., Schmidt, M. L., Crabtree, B., Bagby, R. M., and Trainer, E. (2002). “Dewatering sewage sludge and hazardous sludge with geotextile tubes.” Proc., 7th Int. Conf. Geosynthetics, A. A. Balkema, Rotterdam, Netherlands, 1007–1012.
Fowler, J., Toups, D., Duarte, F., and Gilbert, P. (1994). Geotextile contained dredged material, Red Eye Crossing, Baton Rouge, LA.
Fowler, J., Toups, D., and Gilbert, P. (1995). “Geotextile contained contaminated dredged material, Marina Del Rey, Los Angeles and Port of Oakland, California.” Proc., 14th World Dredging Congress, World Organisation of Dredging Associations, Amsterdam, Netherlands.
Hamad, F., Stolle, D., and Moormann, C. (2016). “Material point modelling of releasing geocontainers from a barge.” Geotext. Geomembr., 44(3), 308–318.
Hölzer, A., and Sommerfeld, M. (2008). “New simple correlation formula for the drag coefficient of non-spherical particles.” Powder Technol., 184(3), 361–365.
Lawson, C. R. (2008). “Geotextile containment for hydraulic and environmental engineering.” Geosynth. Int., 15(6), 384–427.
Pilarczyk, K. W. (2000a). “Critical review of geosystems in hydraulic and coastal engineering applications.” Proc., European Geosynthetics Conf., 65–76.
Pilarczyk, K. W. (2000b). Geosynthetics and geosystems in hydraulic and coastal engineering, A. A. Balkema, Rotterdam, Netherlands.
Recio, J., and Oumeraci, H. (2009). “Process based stability formulae for coastal structures made of geotextile sand containers.” Coastal Eng., 56(5), 632–658.
Restall, S. J., Jackson, L. A., Heerten, G., and Hornsey, W. P. (2002). “Case studies showing the growth and development of geotextile sand containers: An Australian perspective.” Geotext. Geomembr., 20(5), 321–342.
Ruan, X. C. (2006). “大型土工织物充灌袋在上海洋山深水港海堤建设中的应用 [Application of large-size geotextile bags in the construction of Shanghai Yangshan deep-water port].” Port Waterway Eng., 11, 31–33 (in Chinese).
Shin, E. C., and Oh, Y. I. (2007). “Coastal erosion prevention by geotextile tube technology.” Geotext. Geomembr., 25(4), 264–277.
Yang, S. Q., Shu, Y. M., and Yang, X. C. (2009). “Flume experiment and numerical analysis for bank reinforcement with geocontainer.” Proc., 4th Asian Regional Conf. on Geosynth., Indian Chapter of IGS, Shanghai, China, 630–636.
Zhu, L., Wang, J., Cheng, N. S., Ying, Q., and Zhang, D. (2004). “Settling distance and incipient motion of sandbags in open channel flows.” J. Waterway, Port, Coastal, Ocean Eng., 98–103.
Information & Authors
Information
Published In
Copyright
© 2017 American Society of Civil Engineers.
History
Received: Aug 1, 2016
Accepted: Feb 27, 2017
Published online: Jun 2, 2017
Published in print: Sep 1, 2017
Discussion open until: Nov 2, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.