Hydrodynamic Forces and Coefficients on Flexible Risers Undergoing Vortex-Induced Vibrations in Uniform Flow
Publication: Journal of Waterway, Port, Coastal, and Ocean Engineering
Volume 142, Issue 4
Abstract
In this study, the distribution and variation of the hydrodynamic forces and hydrodynamic coefficients in both inline (IL) and cross-flow (CF) directions on flexible risers experiencing vortex-induced vibration (VIV) in a uniform flow were investigated. The hydrodynamic forces in the CF and IL directions were theoretically calculated by the Euler-Bernoulli beam vibration equation. With the least-squares method, the hydrodynamic coefficients in both CF and IL directions were further investigated. The results indicate that the hydrodynamic force and vibration displacement almost simultaneously reach their maximums. The excitation coefficients obtained in this paper do not always agree with those obtained by the forced-oscillation tests: some excitation coefficients are even negative within the usual defined exciting nondimensional frequency regime and are related with not only the nondimensional frequency and amplitude but also phase angles of the CF and IL displacements. The added-mass coefficient along a flexible riser has a significant variation compared with that of a rigid cylinder oscillating in a pure CF or IL direction. Moreover, compared with the excitation force, added-mass force is found to be the dominant component in the overall hydrodynamic force for the flexible riser undergoing VIV.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This research was supported by the National Science Foundation of China under grant numbers 51239007, 51279101, 51490674, and 51490675.
References
Abaqus 6.10 [Computer software]. Dassault Systèmes, Providence, RI.
API (American Petroleum Institute). (1998). Recommended practice API-RP-2RD: Design of risers for floating production systems (FPSs) and tension leg platforms (TLPs), API, Washington, DC.
Aronsen, K. H. (2007). “An experimental investigation of in-line and combined in-line and cross-flow vortex induced vibrations.” Ph.D. thesis, Dept. of Marine Technology, NTNU, Trondheim, Norway.
Chaplin, J. R., et al. (2005). “Blind predictions of laboratory measurements of vortex-induced vibrations of a tension riser.” J. Fluids Struct., 21(1), 25–40.
Chen, H., Huang, K., Chen, C., and Mercier, R. S. (2007). “CFD simulation of a Riser VIV–Phase 1 Report”. A178, Texas A&M Engineering Experiment Station, College Station, TX.
Chen, T., and Chen, B. (1984). Structural mechanics for ships, National Defence Industrial Press, Beijing, 29–30.
Debnath, L. (2001). Wavelet transforms and time-frequency signal analysis, Birkhäuser, Boston.
Evangelinos, C., Lucor, D., and Karniadakis, G. E. (2000). “DNS-derived force distribution on flexible cylinders subject to vortex-induced vibration.” J. Fluids Struct., 14(3), 429–440.
Fang, S. M., Niedzwecki, J. M., Fu, S., Li, R., and Yang, J. (2014). “VIV response of a flexible cylinder with varied coverage by buoyancy elements and helical strakes.” Mar. Struct., 39, 70–89.
Fu, S., Ren, T., Li, R., and Wang, X. (2011). “Experimental investigation on VIV of the flexible model within full scale Re number regime.” Proc., Offshore Mechanics and Arctic Engineering Conf. 2011, OMAE2011-49042, ASME, New York.
Fu, S., Wang, J., Baarholm, R., Wu, J., and Larsen, C. M. (2013). “VIV of flexible cylinder in oscillatory flow.” Proc., Offshore Mechanics and Arctic Engineering Conf. 2013, OMAE 2013-10348, ASME, New York.
Fu, S., Wang, J., Baarholm, R., Wu, J., and Larsen, C. M. (2014). “Features of vortex-induced vibration in oscillatory flow.” J. Offshore Mech. Arct. Eng., 136(1), 011801.
Gopalkrishnan, R. (1993). “Vortex-Induced forces on oscillating bluff cylinders.” Ph.D. thesis, Dept. of Ocean Engineering, Massachusetts Institute of Technology, Cambridge, MA.
Huera-Huarte, F. J., Bearman, P. W., and Chaplin, J. R. (2006). “On the force distribution along the axis of a flexible circular cylinder undergoing multi-mode vortex-induced vibrations.” J. Fluids Struct., 22(6–7), 897–903.
Kaiktsis, L., Triantafyllou, G. S., and Özbas, M. (2007). “Excitation, inertia, and drag forces on a cylinder vibrating transversely to a steady flow.” J. Fluids Struct., 23(1), 1–21.
Larsen, C. M., Yttervik, R., Passano, E., and Vikestad, K. (2001). VIVANA–theory manual. Version 3.1, Marintek, Trondheim, Norway.
Marcolloa, H., and Hinwood, J. B. (2006). “On shear flow single mode lock-in with both cross-flow and in-line lock-in mechanisms.” J. Fluids Struct., 22, 197–211.
Mukundan, H. (2008). “Vortex induced vibration and force reconstruction from field and experimental data.” Ph.D. thesis, Dept. of Mechanical Engineering, Massachusetts Institute of Technology, Cambridge, MA.
Mutlu Sumer, B., and Fredsøe, J. (2006). Hydrodynamics around cylindrical structures, World Scientific Publishing, Singapore, 334–413.
Sarpkaya, T. (2004). “A critical review of the intrinsic nature of vortex-induced vibrations.” J. Fluids Struct., 19(4), 389–447.
Swithenbank, S. B. (2007). Dynamics of long flexible cylinders at high-mode number in uniform and sheared flows, Dept. of Ocean Engineering, Massachusetts Institute of Technology, Cambridge, MA.
Wang, J., Baarholm, R., and Fu, S. (2014). “Vortex-induced vibration of steel catenary riser under vessel motion.” Proc., Offshore and Arctic Engineering Conf. 2014, OMAE 2014-23584, ASME, New York.
Wu, J., Larsen, C. M., and Kaasen, K. E. (2008). “A new approach for identification of forces on slender beams subjected to vortex induced vibrations.” Proc., Offshore Mechanics and Arctic Engineering Conf. 2008, OMAE 2008-57550, ASME, New York.
Wu, J., Mainon, P., Larsen, C. M., and Lie, H. (2009). “VIV force identification using classical optimal control algorithm.” Proc., Offshore Mechanics and Arctic Engineering Conf. 2009, OMAE2009-79568, ASME, New York.
Vandiver, J. K., Jaiswal, V., and Jhingran, V. (2009). “Insights on vortex-induced, traveling waves on long risers.” J. Fluids Struct., 25(4),641–653.
Vikestad, K., Vandiver, J. K., and Larsen C. M. (2000). “Added-mass and oscillation frequency for circular cylinder subjected to VIV and external disturbance.” J. Fluids Struct., 14(7), 1071–1088.
Yamamoto, C. T., Meneghini, J. R., Saltara, F.,Fregonesi, R. A., and Ferrari, Jr., J. A. (2005). “Numerical simulations of vortex-induced vibration on flexible cylinders.” J. Fluids Struct., 19(4), 467–89.
Yin, D., and Larsen, C. M. (2011). “Experimental and numerical analysis of forced motion of a circular cylinder.” Proc., Offshore Mechanics and Arctic Engineering Conf. 2011, OMAE2011-49438, ASME, New York.
Information & Authors
Information
Published In
Copyright
© 2016 American Society of Civil Engineers.
History
Received: Jun 26, 2015
Accepted: Nov 10, 2015
Published online: Jan 28, 2016
Discussion open until: Jun 28, 2016
Published in print: Jul 1, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.