Engineering Modeling of Wave Transmission of Reef Balls
Publication: Journal of Waterway, Port, Coastal, and Ocean Engineering
Volume 140, Issue 4
Abstract
Reef Balls are hemispherical concrete units, which feature hydrogen ion concentration neutralized concrete and specialized surface textures to promote the growth of marine life. Reef Balls can be arranged in different layouts to form submerged breakwaters, even of significant width. Although structures formed with Reef Balls have been used for the protection of several top-quality sites, no well-established design tool exists for the prediction of wave transmission behind them. In this study, a set of equations were proposed based on the conceptual approach. The expressions were validated by more than 300 experimental data from physical model tests conducted at two different laboratories. The new predictive model showed a number of encouraging properties, such as a high determination index, , normality of the residuals, and a constant standard error with respect to the structure layout.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors gratefully acknowledge Dr. H. D. Armono and Dr. Donald L. Ward for providing the experimental data analyzed in this work.
References
Armono, H. D. (2003). “Hemispherical shaped artificial reefs.” Ph.D. Thesis, Queen’s Univ., Kingston, ON, Canada.
Armono, H. D., and Hall, K. R. (2003). “Wave transmission on submerged breakwaters made of hollow hemispherical shape artificial reefs.” Proc., 1st Coastal, Estuary and Offshore Engineering Speciality Conf. of the Canadian Society for Civil Engineering, Canadian Society for Civil Engineering, 1–13.
Barber, R. T. (2000). “Reef Balls™: An advanced technique to mimic natural reef system using designed artificial reefs.” 〈http://artificialreefs.org/ScientificReports/ReefBallProjectPlanning.htm〉 (May 2000).
Basco, D. (1985). “Qualitative description of wave breaking (motion patterns).” J. Waterway, Port, Coastal, Ocean Eng., 171–188.
Briganti, R., van der Meer, J. W., Buccino, M., and Calabrese, M. (2004). “Wave transmission behind low-crested structures.” Proc., Coastal Structures 2003, ASCE, Reston, VA, 580–592.
Buccino, M., and Calabrese, M. (2007). “Conceptual approach for prediction of wave transmission at low-crested breakwaters.” J. Waterway, Port, Coastal, Ocean Eng., 213–224.
Burcharth, H. F., Hawkins, T., Zanuttigh, B., Lamberti, A. (2007). Environmental design guidelines for low crested coastal structures, Elsevier, Amsterdam, Netherlands.
Calabrese, M., Di Pace, M., Buccino, M., Tomasicchio, G. R., and Ciralli, E. (2011). “Nearshore circulation at a coastal defence system in Sicily. Physical and numerical experiments.” J. Coast. Res., Vol. 64, 474–478.
Calabrese, M., Vicinanaza, D., Buccino, M. (2008). “2D wave set up behind submerged breakwaters.” Ocean Engineering, 35(10), 1015–1028.
d’Angremond, K., van der Meer, J. W., and De Jong, R. J. (1996). “Wave transmission at low-crested structures.” Proc., 25th Int. Conf. of Coastal Engineering, ASCE, Reston, VA, 3305–3318.
Draper, N. R., and Smith, H. (1981). Applied regression analysis, 2nd Ed., Wiley, New York.
Goda, Y., and Ahrens, J. P. (2008). “New formulation on wave transmission over and through low-crested structures.” Proc., 31st Int. Conf. on Coastal Engineering, World Scientific, Hamburg, Germany, 3530–3541.
Harris, L. E. (2007). “Designed reefs for reef and coastal restoration and erosion potential applications for the city of Herzlia, Israel.” 〈www.reefball.org/album/isreal/Herzliyabreakwaterproject/report/〉 (Mar. 2007).
Lamberti, A. (2005). “Editorial paper on DELOS project.” Coast. Eng., 52(10–11), 815–818.
Lamberti, A., Martinelli, L., and Zanuttigh, B. (2007). “Prediction of wave induced water flow over and through the structure, of set-up and rip-currents.” Section 13.5, Environmental design guidelines for low crested coastal structures, Elsevier, Amsterdam, Netherlands, 137–199.
Le Mehautè, B. (1963). “On non-saturated breakers and wave run-up.” Proc., 8th Conf. on Coastal Engineering, ASCE, Reston, VA, 77–92.
Lorenzoni, C., et al. (2010). “Working of defense coastal structures dissipating by macroroughness.” J. Waterway, Port, Coastal, Ocean Eng., 77–90.
Massel, S. R. (1983). “Harmonic generation by waves propagating over a submerged step.” Coast. Eng., 7(4), 357–380.
Reef Ball Foundation. (2012). 〈www.reefball.org/technicalspecs.htm〉.
Seabrook, S. R., and Hall, K. R. (1998). “Wave transmission at submerged rubble mound breakwaters.” Proc., 26th Int. Conf. on Coastal Engineering, ASCE, Reston, VA, 2000–2013.
Tomasicchio, G. R., and D’Alessandro, F. (2013). “Wave energy transmission through and over low-crested breakwaters.” J. Coast. Res., Special Issue 65, 398–403.
van der Meer, J. W. (1990). “Low crested and reef breakwaters.” Technical Rep. No. H986II, Delft Hydraulics, Delft, Netherlands.
van der Meer, J. W., Briganti, R., Zanuttigh, B., and Wang, B. (2005). “Wave transmission and reflection at low-crested structures: Design formulae, oblique wave attack and spectral change.” Coast. Eng., 52(10–11), 915–929.
Vicinanza, D., Caceres, I., Buccino, M., Gironella, X., and Calabrese, M. (2009). “Wave disturbance behind low crested structures: Diffraction and overtopping effects.” Coast. Eng., 56(11–12), 1173–1185.
Zelt, J. A., and Raichlen, F. (1990). “A Lagrangian model for water induced harbour oscillation.” J. Fluid Mech., 213, 203–225.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Apr 22, 2013
Accepted: Sep 13, 2013
Published online: Sep 16, 2013
Published in print: Jul 1, 2014
Discussion open until: Jul 25, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.