Numerical Simulations of Wave Setup over Barred Beach Profiles: Implications for Predictability
Publication: Journal of Waterway, Port, Coastal, and Ocean Engineering
Volume 137, Issue 4
Abstract
Numerical simulations of cross-shore wave transformation and associated wave setup were performed for 100,000 realistic combinations of wave height, period, and beach profile. Results of numerical simulations were compared with a widely used empirical predictor of wave setup, and the outcome was a large variability in setup relative to that calculated by the empirical predictor. The variability, comparable in magnitude to the scatter around the empirical predictor developed with field observations, arose from wave energy dissipation over the cross-shore profile that was not taken into account. The beach-face slope commonly used in empirical predictors can be a poor descriptor of wave transformation across the beach profile, where most of the wave energy dissipation and setup generation occurs. Shoreline setup appears to be far more dependent on accurate characterization of the offshore profile (e.g., bar location and depth) than the beach-face slope.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
We wish to thank Dr. Bob Guza for enthusiastic discussions that developed our thinking. S. Stephens and G. Coco were funded by the New Zealand Foundation for Research Science and Technology (contract UNSPECIFIEDWRHC102). The authors also wish to thank the three reviewers for their useful suggestions.
References
Apotsos, A., Raubenheimer, B., Elgar, S., and Guza, R. T. (2008). “Testing and calibrating parametric wave transformation models on natural beaches.” Coastal Eng., 55, 224–235.
Apotsos, A., Raubenheimer, B., Elgar, S., Guza, R. T., and Smith, J. A. (2007). “Effects of wave rollers and bottom stress on wave setup.” J. Geophys. Res., C112, C02003.
Bowen, A. J., Inman, D. L., and Simmons, V. P. (1968). “Wave ‘set-down’ and set-up.” J. Geophys. Res., 73(8), 2569–2577.
Caballeria, M., Calvete, D., Coco, G., Dodd, N., and Falques, A. (2003). “Formation and alongshore spacing of crescentic bars.” Proc., 3rd Symp. on River, Coastal and Estuarine Morphodynamics, International Association for Hydro-Environment Engineering and Research, Madrid, Spain, 310–319.
Fairchild, J. C. (1958). “Model study of wave set-up induced by hurricane waves at Narragansett Pier, Rhode Island.” Bulletin of the Beach Erosion Board, U.S. Army Corps of Engineers, Washington, DC.
Guza, R. T., and Thornton, E. B. (1981). “Wave set-up on a natural beach.” J. Geophys. Res., C86, 4133–4137.
Haller, M. C., and Catalan, P. A. (2009). “Remote sensing of wave roller lengths in the laboratory.” J. Geophys. Res., C114, 7022–7022.
Hanslow, D., and Nielsen, P. (1993). “Shoreline set-up on natural beaches.” J. Coastal Res., 15, 1–10.
Holland, K. T., Raubenheimer, B., Guza, R. T., and Holman, R. A. (1995). “Runup kinematics on a natural beach.” J. Geophys. Res., C100, 4985–4993.
Holman, R. A., and Sallenger, A. H. (1985). “Setup and swash on a natural beach.” J. Geophys. Res., C90, 945–953.
Holthuijsen, L. H., and Herbers, T. H. C. (1986). “Statistics of breaking waves observed as whitecaps in the open sea.” J. Phys. Oceanogr., 16, 290–297.
Hsu, T. W., Tseng, I. F., and Lee, C. P. (2006). “A new shape function for bar-type beach profiles.” J. Coastal Res., 223, 728–736.
Hunt, I. A. (1959). “Design of seawalls and breakwaters.” Proc. Am. Soc. Civ. Eng., 85, 123–152.
Inman, D. L., Elwany, M. H. S., and Jenkins, S. A. (1993). “Shorerise and bar-berm profiles on ocean beaches.” J. Geophys. Res., C98, 18181–18199.
King, B. A., Blackley, M. W. L., Carr, A. P., and Hardcastle, P. J. (1990). “Observations of wave-induced set-up on a natural beach.” J. Geophys. Res., C95, 22289–22297.
Lentz, S., and Raubenheimer, B. (1999). “Field observations of wave setup.” J. Geophys. Res., C104, 25867–25875.
Lippmann, T. C., and Holman, R. A. (1989). “Quantification of sand-bar morphology—A video technique based on wave dissipation.” J. Geophys. Res., C94, 995–1011.
Longuet-Higgins, M. S., and Stewart, R. W. (1962). “Radiation stress and mass transport in gravity waves, with application to ‘surf-beats’.” J. Fluid Mech., 13, 481–504.
Nielsen, P. (1988). “Wave setup: A field study.” J. Geophys. Res., C93, 15643–15652.
Nielsen, P. (1989). “Wave setup and runup: An integrated approach.” Coastal Eng., 13, 1–9.
Raubenheimer, B., Guza, R. T., and Elgar, S. (2001). “Field observations of wave-driven setdown and setup.” J. Geophys. Res., C106, 4629–4638.
Reniers, A., and Battjes, J. A. (1997). “A laboratory study of longshore currents over barred and non-barred beaches.” Coastal Eng., 30, 1–21.
Ruessink, B. G., Miles, J. R., Feddersen, F., Guza, R. T., and Elgar, S. (2001). “Modeling the alongshore current on barred beaches.” J. Geophys. Res., C106, 22451–22463.
Savage, R. P. (1957). “Model tests for hurricane protection project.” Bulletin of the Beach Erosion Board, U.S. Army Corps of Engineers, Washington, DC.
Saville, T. J. (1961). “Experimental determination of wave set-up.” Proc., 2nd Technical Conf. on Hurricanes, U.S. Department. of Commerce, Washington, DC, 242–252.
Stive, M. J. F., and Wind, H. G. (1982). “A study of radiation stress and set-up in the nearshore region.” Coastal Eng., 6, 1–25.
Stockdon, H. F., and Holman, R. A. (2000). “Estimation of wave phase speed and nearshore bathymetry from video imagery.” J. Geophys. Res., C105, 22015–22033.
Stockdon, H. F., Holman, R. A., Howd, P. A., and Sallenger, A. H. (2006). “Empirical parameterization of setup, swash, and runup.” Coastal Eng., 53, 573–588.
Svendsen, I. A. (1984a). “Mass flux and undertow in a surf zone.” Coastal Eng., 8, 347–364.
Svendsen, I. A. (1984b). “Wave heights and set-up in a surf zone.” Coastal Eng., 8, 303–329.
Thornton, E. B., and Guza, R. T. (1983). “Transformation of wave height distribution.” J. Geophys. Res., C88, 5925–5938.
van Dongeren, A., Plant, N., Cohen, A., Roelvink, D., Haller, M. C., and Catalan, P. A. (2008). “Beach wizard: Nearshore bathymetry estimation through assimilation of model computations and remote observations.” Coastal Eng., 55, 1016–1027.
Wang, P., and Davis, R. A. (1998). “A beach profile model for a barred coast—Case study from Sand Key, west-central Florida.” J. Coastal Res., 14, 981–991.
Information & Authors
Information
Published In
Copyright
© 2011 American Society of Civil Engineers.
History
Received: Dec 7, 2009
Accepted: Oct 18, 2010
Published online: Oct 20, 2010
Published in print: Jul 1, 2011
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.