Simultaneous Hydraulic and Quality Model Calibration of a Real-World Water Distribution Network
Publication: Journal of Water Resources Planning and Management
Volume 146, Issue 6
Abstract
Hydraulic and quality models are widely used in water distribution networks (WDNs) for assisting network analysis, design, and operation. In a calibrated model, the difference between the simulated and measured data reaches an acceptable error level. In this study, to calibrate the hydraulic and quality model of the network, the pressure and residual chlorine levels were measured initially during 2-h steps in the network. Furthermore, the bulk chlorine decay values were measured using the laboratory tests. Then, hydraulic and quality calibrations were carried out simultaneously using particle swarm optimization (PSO) as the optimization tool, Hazen-Williams roughness () and fitting coefficients as the decision variables, and mean absolute percentage error (MAPE) as the objective function. According to the results, the PSO algorithm was highly accurate in determining the and could minimize the difference between the observed and simulated values.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during this study are proprietary and confidential in nature and may only be provided with restrictions.
Acknowledgments
This study was approved by Ethics Committee in Yazd Shahid Sadoughi University of Medical Sciences with the code of IR.SSU.SPH.REC.1396.71.
References
Alvisi, S., and M. Franchini. 2010. “Pipe roughness calibration in water distribution systems using grey numbers.” J. Hydroinf. 12 (4): 424–445. https://doi.org/10.2166/hydro.2010.089.
AWWA (American Water Works Association). 2005. Computer modeling of water distribution systems. Denver: AWWA.
Bhave, P. R. 1988. “Calibrating water distribution network models.” J. Environ. Eng. 114 (1): 120–136. https://doi.org/10.1061/(ASCE)0733-9372(1988)114:1(120).
Cheung, P. B., M. Propato, B. Brémond, and O. Piller. 2006. “Water quality parameter estimation in a water distribution system.” Civ. Eng. Environ. Syst. 26 (3): 231–248.
Cordoba, G. C., L. Tuhovčák, and M. Tauš. 2014. “Using artificial neural network models to assess water quality in water distribution networks.” Procedia Eng. 70 (Jan): 399–408. https://doi.org/10.1016/j.proeng.2014.02.045.
Dini, M., and M. Tabesh. 2017. “Water distribution network quality model calibration: A case study—Ahar.” Water Sci. Technol. Water Supply 17 (3): 759–770. https://doi.org/10.2166/ws.2016.166.
Do, N. C., A. R. Simpson, J. W. Deuerlein, and O. Piller. 2016. “Calibration of water demand multipliers in water distribution systems using genetic algorithms.” J. Water Resour. Plann. Manage. 142 (11): 04016044. https://doi.org/10.1061/(ASCE)WR.1943-5452.0000691.
Ferreri, G., E. Napoli, and A. Tumbiolo. 1994. “Calibration of roughness in water distribution networks.” In Proc., 2nd Int. Conf. on Water Pipeline Systems, 379–396. London: Mechanical Engineering Publications.
Fisher, I., G. Kastl, and A. Sathasivan. 2011a. “Evaluation of suitable chlorine bulk-decay models for water distribution systems.” Water Res. 45 (16): 4896–4908. https://doi.org/10.1016/j.watres.2011.06.032.
Fisher, I., G. Kastl, and A. Sathasivan. 2012. “A suitable model of combined effects of temperature and initial condition on chlorine bulk decay in water distribution systems.” Water Res. 46 (10): 3293–3303. https://doi.org/10.1016/j.watres.2012.03.017.
Fisher, I., G. Kastl, A. Sathasivan, and V. Jegatheesan. 2011b. “Suitability of chlorine bulk decay models for planning and management of water distribution systems.” Crit. Rev. Environ. Sci. Technol. 41 (20): 1843–1882. https://doi.org/10.1080/10643389.2010.495639.
Gao, T. 2017. “Pipe roughness estimation in water distribution networks using head loss adjustment.” J. Water Resour. Plann. Manage. 143 (5): 04017007. https://doi.org/10.1061/(ASCE)WR.1943-5452.0000752.
Hua, F., J. West, R. Barker, and C. Forster. 1999. “Modelling of chlorine decay in municipal water supplies.” Water Res. 33 (12): 2735–2746. https://doi.org/10.1016/S0043-1354(98)00519-3.
Huang, J. J., and E. A. McBean. 2008. “Using Bayesian statistics to estimate chlorine wall decay coefficients for water supply system.” J. Water Resour. Plann. Manage. 134 (2): 129–137. https://doi.org/10.1061/(ASCE)0733-9496(2008)134:2(129).
Hutton, C. J., Z. Kapelan, L. Vamvakeridou-Lyroudia, and D. A. Savić. 2012. “Dealing with uncertainty in water distribution system models: A framework for real-time modeling and data assimilation.” J. Water Resour. Plann. Manage. 140 (2): 169–183. https://doi.org/10.1061/(ASCE)WR.1943-5452.0000325.
Jonkergouw, P., S.-T. Khu, Z. Kapelan, and D. Savić. 2008. “Water quality model calibration under unknown demands.” J. Water Resour. Plann. Manage. 134 (4): 326–336. https://doi.org/10.1061/(ASCE)0733-9496(2008)134:4(326).
Kapelan, Z. S., D. A. Savic, and G. A. Walters. 2003. “Multiobjective sampling design for water distribution model calibration.” J. Water Resour. Plann. Manage. 129 (6): 466–479. https://doi.org/10.1061/(ASCE)0733-9496(2003)129:6(466).
Karadirek, I., S. Kara, A. Muhammetoglu, H. Muhammetoglu, and S. Soyupak. 2016. “Management of chlorine dosing rates in urban water distribution networks using online continuous monitoring and modeling.” Urban Water J. 13 (4): 345–359. https://doi.org/10.1080/1573062X.2014.992916.
Liu, M. J. 2013. Wall decay coefficient of combined chlorine in a drinking water distribution system. Edmonton, AB, Canada: Univ. of Alberta.
Liu, M. J., S. Craik, and D. Z. Zhu. 2015. “Determination of cast iron pipe wall decay coefficient for combined chlorine in a municipal water distribution system.” Can. J. Civ. Eng. 42 (4): 250–258. https://doi.org/10.1139/cjce-2014-0449.
Liu, S., L. Ma, and K. Xin. 2008. “Calibration of chlorine decay rates by a combined optimization algorithm.” Water Distrib. Syst. Anal. 2008: 1–7. https://doi.org/10.1061/41024(340)92.
Maier, H. R., Z. Kapelan, J. Kasprzyk, J. Kollat, L. S. Matott, M. C. Cunha, G. C. Dandy, M. S. Gibbs, E. Keedwell, and A. Marchi. 2014. “Evolutionary algorithms and other metaheuristics in water resources: Current status, research challenges and future directions.” Environ. Modell. Software 62 (Dec): 271–299. https://doi.org/10.1016/j.envsoft.2014.09.013.
Maier, S. H., R. S. Powell, and C. A. Woodward. 2000. “Calibration and comparison of chlorine decay models for a test water distribution system.” Water Res. 34 (8): 2301–2309. https://doi.org/10.1016/S0043-1354(99)00413-3.
Meirelles, G., D. Manzi, B. Brentan, T. Goulart, and E. Luvizotto. 2017. “Calibration model for water distribution network using pressures estimated by artificial neural networks.” Water Resour. Manage. 31 (13): 4339–4351. https://doi.org/10.1007/s11269-017-1750-2.
Moghaddam, A., A. Alizadeh, A. Faridhosseini, A. N. Ziaei, and D. F. Heravi. 2018. “Optimal design of water distribution networks using simple modified particle swarm optimization approach.” Desalin. Water Treat. 104 (Feb): 99–110. https://doi.org/10.5004/dwt.2018.21911.
Moghaddam, A., J. Behmanesh, and A. Farsijani. 2016. “Parameters estimation for the new four-parameter nonlinear Muskingum model using the particle swarm optimization.” Water Resour. Manage. 30 (7): 2143–2160. https://doi.org/10.1007/s11269-016-1278-x.
Monteiro, L., D. Figueiredo, S. Dias, R. Freitas, D. Covas, J. Menaia, and S. Coelho. 2014. “Modeling of chlorine decay in drinking water supply systems using EPANET MSX.” Procedia Eng. 70 (Jan): 1192–1200. https://doi.org/10.1016/j.proeng.2014.02.132.
Munavalli, G., M. M. Kumar, and M. Kulkarni. 2009. “Wall decay of chlorine in water distribution system.” J. Water Supply Res. Technol. 58 (5): 316–326. https://doi.org/10.2166/aqua.2009.048.
Ormsbee, L. E. 1989. “Implicit network calibration.” J. Water Resour. Plann. Manage. 115 (2): 243–257. https://doi.org/10.1061/(ASCE)0733-9496(1989)115:2(243).
Ostfeld, A., E. Salomons, L. Ormsbee, J. G. Uber, C. M. Bros, P. Kalungi, R. Burd, B. Zazula-Coetzee, T. Belrain, and D. Kang. 2011. “Battle of the water calibration networks.” J. Water Resour. Plann. Manage. 138 (5): 523–532. https://doi.org/10.1061/(ASCE)WR.1943-5452.0000191.
Pasha, M., and K. Lansey. 2009. “Water quality parameter estimation for water distribution systems.” Civ. Eng. Environ. Syst. 26 (3): 231–248. https://doi.org/10.1080/10286600802059080.
Peirovi Minaee, R., M. Mokhtari, A. Moghaddam, A. A. Ebrahimi, M. Askarishahi, and M. Afsharnia. 2019. “Wall decay coefficient estimation in a real-life drinking water distribution network.” Water Resour. Manage. 33 (4): 1557–1569. https://doi.org/10.1007/s11269-019-02206-x.
Rossman, L. A. 2000. EPANET 2: Users manual. Cincinnati: US Environmental Protection Agency.
Savic, D. A., Z. S. Kapelan, and P. M. Jonkergouw. 2009. “Quo vadis water distribution model calibration?” Urban Water J. 6 (1): 3–22. https://doi.org/10.1080/15730620802613380.
Sophocleous, S., D. Savic, Z. Kapelan, Y. Shen, and P. Sage. 2016. “A graph-based analytical technique for the improvement of water network model calibration.” Procedia Eng. 154 (Jan): 27–35. https://doi.org/10.1016/j.proeng.2016.07.415.
Vasconcelos, J. J., L. A. Rossman, W. M. Grayman, P. F. Boulos, and R. M. Clark. 1997. “Kinetics of chlorine decay.” Am. Water Works Assoc. J. 89 (7): 54. https://doi.org/10.1002/j.1551-8833.1997.tb08259.x.
Walski, T. M., D. V. Chase, D. A. Savic, W. Grayman, S. Beckwith, and E. Koelle. 2003. Advanced water distribution modeling and management. Waterbury, CT: Haestad Press.
Information & Authors
Information
Published In
Copyright
©2020 American Society of Civil Engineers.
History
Received: Feb 8, 2019
Accepted: Dec 6, 2019
Published online: Mar 24, 2020
Published in print: Jun 1, 2020
Discussion open until: Aug 24, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.