Mechanical and Hydraulic Reliability Estimators for Water Distribution Systems
Publication: Journal of Water Resources Planning and Management
Volume 145, Issue 11
Abstract
Reliability of water distribution systems is typically divided into mechanical and hydraulic reliability. This paper introduces two reliability surrogate measures: the mechanical reliability estimator and the hydraulic reliability estimator. These estimators were developed based on simplifications of a broader definition of stochastic reliability and were tested in the multiobjective design optimization of the Hanoi and Fossolo benchmark networks. The numerical values of the estimators were compared with existing reliability surrogate measures (the residence index, the network resilience index, and flow entropy) through correlation analysis. Results showed that the proposed estimators concur with existing optimization algorithms. They also show that previous indexes correlate with at most one of the types of reliability, while a trade-off between them seems to appear, especially in one of the study cases.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code generated or used during the study are available from the corresponding author by request.
References
Ang, W. K., and P. W. Jowitt. 2006. “Solution for water distribution systems under pressure-deficient conditions.” J. Water Resour. Plann. Manage. 132 (3): 175–182. https://doi.org/10.1061/(ASCE)0733-9496(2006)132:3(175).
Atkinson, S., R. Farmani, F. A. Memon, and D. Butler. 2014. “Reliability indicators for water distribution system design: Comparison.” J. Water Resour. Plann. Manage. 140 (2): 160–168. https://doi.org/10.1061/(ASCE)WR.1943-5452.0000304.
Baños, R., J. Reca, J. Martínez, C. Gil, and A. L. Márquez. 2011. “Resilience indexes for water distribution network design: A performance analysis under demand uncertainty.” Water Resour. Manage. 25 (10): 2351–2366. https://doi.org/10.1007/s11269-011-9812-3.
Bao, Y., and L. W. Mays. 1990. “Model for water distribution system reliability.” J. Hydraul. Eng. 116 (9): 1119–1137. https://doi.org/10.1061/(ASCE)0733-9429(1990)116:9(1119).
Bragalli, C., C. D’Ambrosio, J. Lee, A. Lodi, and P. Toth. 2008. Water network design by MINLP. Yorktown Heights, NY: IBM Research.
Cormen, T. H., C. E. Leiserson, R. L. Rivest, and C. Stein. 2009. Introduction to algorithms. Cambridge, MA: MIT Press.
Creaco, E., M. Franchini, and E. Todini. 2016a. “The combined use of resilience and loop diameter uniformity as a good indirect measure of network reliability.” Urban Water J. 13 (2): 167–181. https://doi.org/10.1080/1573062X.2014.949799.
Creaco, E., M. Franchini, and E. Todini. 2016b. “Generalized resilience and failure indices for use with pressure-driven modeling and leakage.” J. Water Resour. Plann. Manage. 142 (8): 04016019. https://doi.org/10.1061/(ASCE)WR.1943-5452.0000656.
Cullinane, M. J., K. E. Lansey, and L. W. Mays. 1992. “Optimization-availability-based design of water-distribution networks.” J. Hydraul. Eng. 118 (3): 420–441. https://doi.org/10.1061/(ASCE)0733-9429(1992)118:3(420).
Farmani, R., G. A. Walters, and D. A. Savic. 2005. “Trade-off between total cost and reliability for Anytown water distribution network.” J. Water Resour. Plann. Manage. 131 (3): 161–171. https://doi.org/10.1061/(ASCE)0733-9496(2005)131:3(161).
Fujiwara, O., and D. B. Khang. 1990. “A two-phase decomposition method for optimal design of looped water distribution networks.” Water Resour. Res. 26 (4): 539–549. https://doi.org/10.1029/WR026i004p00539.
Fujiwara, O., and H. D. Tung. 1991. “Reliability improvement for water distribution networks through increasing pipe size.” Water Resour. Res. 27 (7): 1395–1402. https://doi.org/10.1029/91WR00882.
Gheisi, A., and G. Naser. 2015. “Multistate reliability of water-distribution systems: Comparison of surrogate measures.” J. Water Resour. Plann. Manage. 141 (10): 04015018. https://doi.org/10.1061/(ASCE)WR.1943-5452.0000529.
Jayaram, N., and K. Srinivasan. 2008. “Performance-based optimal design and rehabilitation of water distribution networks using life cycle costing.” Water Resour. Res. 44 (1): 1–15. https://doi.org/10.1029/2006WR005316.
Jung, D., D. Kang, J. H. Kim, and K. Lansey. 2014. “Robustness-based design of water distribution systems.” J. Water Resour. Plann. Manage. 141 (11): 04014033. https://doi.org/10.1061/(ASCE)WR.1943-5452.0000421.
Jung, D., and J. H. Kim. 2018. “Water distribution system design to minimize costs and maximize topological and hydraulic reliability.” J. Water Resour. Plann. Manage. 144 (9): 06018005. https://doi.org/10.1061/(ASCE)WR.1943-5452.0000975.
Jung, D., D. G. Yoo, D. Kang, and J. H. Kim. 2016. “Linear model for estimating water distribution system reliability.” J. Water Resour. Plann. Manage. 142 (8): 04016022. https://doi.org/10.1061/(ASCE)WR.1943-5452.0000664.
Liu, H., D. A. Savic, Z. Kapelan, E. Creaco, and Y. Yuan. 2017. “Reliability surrogate measures for water distribution system design: Comparative analysis.” J. Water Resour. Plann. Manage. 143 (2): 04016072. https://doi.org/10.1061/(ASCE)WR.1943-5452.0000728.
Paez, D., Y. Filion, and C. R. Suribabu. 2018a. “Correlation analysis of reliability surrogate measures in real size water distribution networks.” In Vol. 1 of Proc., WDSA/CCWI Joint Conf. Kingston, Cananda: Queen’s Univ.
Paez, D., C. Salcedo, and A. Avila. 2018b. “Improving convergence rate of NSGA II with intermittent feedback from energy based methods for design of water distribution systems.” In Vol. 1 of Proc., WDSA/CCWI Joint Conf. Kingston, Cananda: Queen’s Univ.
Park, J. I., J. H. Lambert, and Y. Y. Haimes. 1998. “Hydraulic power capacity of water distribution networks in uncertain conditions of deterioration.” Water Resour. Res. 34 (12): 3605–3614. https://doi.org/10.1029/98WR01377.
Prasad, T. D., and N. S. Park. 2004. “Multiobjective genetic algorithms for design of water distribution networks.” J. Water Resour. Plann. Manage. 130 (1): 73–82. https://doi.org/10.1061/(ASCE)0733-9496(2004)130:1(73).
Raad, D. N., A. N. Sinske, and J. H. van Vuuren. 2010. “Comparison of four reliability surrogate measures for water distribution systems design.” Water Resour. Res. 46 (5): 1–11. https://doi.org/10.1029/2009WR007785.
Tabesh, M., J. Soltani, R. Farmani, and D. Savic. 2009. “Assessing pipe failure rate and mechanical reliability of water distribution networks using data-driven modeling.” J. Hydroinf. 11 (1): 1–17. https://doi.org/10.2166/hydro.2009.008.
Tanyimboh, T., and C. Sheahan. 2002. “A maximum entropy based approach to the layout optimization of water distribution systems.” Civ. Eng. Environ. Syst. 19 (3): 223–253. https://doi.org/10.1080/10286600214153.
Tanyimboh, T. T., C. Siew, S. Saleh, and A. Czajkowska. 2016. “Comparison of surrogate measures for the reliability and redundancy of water distribution systems.” Water Resour. Manage. 30 (10): 3535–3552. https://doi.org/10.1007/s11269-016-1369-8.
Tanyimboh, T. T., M. Tabesh, and R. Burrows. 2001. “Appraisal of source head methods for calculating reliability of water distribution networks.” J. Water Resour. Plann. Manage. 127 (4): 206–213. https://doi.org/10.1061/(ASCE)0733-9496(2001)127:4(206).
Tanyimboh, T. T., and A. B. Templeman. 1993. “Maximum entropy flows for single-source networks.” Eng. Optim. 22 (1): 49–63. https://doi.org/10.1080/03052159308941325.
Tanyimboh, T. T., and A. B. Templeman. 1998. “Calculating the reliability of single-source networks by the source head method.” Adv. Eng. Software 29 (7–9): 499–505. https://doi.org/10.1016/S0965-9978(98)00016-7.
Todini, E. 2000. “Looped water distribution networks design using a resilience index based heuristic approach.” Urban Water 2 (2): 115–122. https://doi.org/10.1016/S1462-0758(00)00049-2.
Wagner, J. M., U. Shamir, and D. H. Marks. 1988. “Water distribution reliability: Simulation methods.” J. Water Resour. Plann. Manage. 130 (1): 276–294. https://doi.org/10.1061/(ASCE)0733-9496(1988)114:3(276).
Wang, Q., M. Guidolin, D. Savic, and Z. Kapelan. 2015. “Two-objective design of benchmark problems of a water distribution system via MOEAs: Towards the best-known approximation of the true Pareto front.” J. Water Resour. Plann. Manage. 141 (3): 04014060. https://doi.org/10.1061/(ASCE)WR.1943-5452.0000460.
Yazdani, A., and P. Jeffrey. 2012. “Applying network theory to quantify the redundancy and structural robustness of water distribution systems.” J. Water Resour. Plann. Manage. 138 (2): 153–161. https://doi.org/10.1061/(ASCE)WR.1943-5452.0000159.
Information & Authors
Information
Published In
Copyright
©2019 American Society of Civil Engineers.
History
Received: Oct 9, 2018
Accepted: Mar 28, 2019
Published online: Sep 16, 2019
Published in print: Nov 1, 2019
Discussion open until: Feb 16, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.