Design of a Distribution Network Scale Model for Monitoring Drinking Water Quality
Publication: Journal of Water Resources Planning and Management
Volume 143, Issue 9
Abstract
To investigate transport of drinking water in topologically complex distribution networks and associated monitoring problems, experimental facilities can provide a relevant complement to numerical models and living laboratoriess or playgrounds. An experimental facility was designed which is a scale model of an existing supply zone serving customers. The facility was designed for (1) investigating transport of water qualities and potential contaminations; (2) providing a fast and flexible testing ground for networks of real-time water quality and quantity sensors prior to installment in live distribution networks; and (3) training and demonstration purposes. A scale analysis was used to investigate the possibilities including in a single facility the processes turbulence, turbulent diffusion, particle transport mode, and shear stress in a way that represents the real-life network environment, and to determine the facility’s spatial and temporal dimensions. Using hydraulic modeling, it was verified that the main flow patterns in the facility are representative for the real-life network. The final design includes a model, transparent PVC pipes, and a decentralized fast control system that includes 28 demand and 4 supply locations to simulate complex flow patterns. The setup is currently being prepared for experimentation. This paper describes the theoretical background and the design and construction process.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors thank Bendert de Graaf (Vitens), Eelco Trietsch (Vitens), Marije Yszenga (Vitens), Joby Boxall (University of Sheffield), and Stewart Husband (University of Sheffield) for fruitful discussions and helpful advice on the design of the facility. Wim Hijnen (KWR) and Paul van der Wielen (KWR) are thanked for helpful discussions on microbiology. This work was funded by the EU SP 7 SmartWater4Europe Grant. The authors greatly acknowledge thoughtful and constructive reviews from two anonymous reviewers.
References
Choi, C., Shen, J., and Austin, R. (2008). “Development of a comprehensive solute mixing model (AZRED) for double-tee, cross, and wye junctions.” Water Distribution Systems Analysis 2008, ASCE, Reston, VA, 1–10.
Colebrook, C. F. (1939). “Turbulent flow in pipes, with particular reference to the transition region between smooth and rough pipe laws.” J. Inst. Civil Eng., 122(3), 218–221.
de Graaf, B. R., et al. (2012). “Implementation of an innovative sensor technology for effective online water quality monitoring in the distribution network.” Water Pract. Technol., 7(4), 1–12.
Douterelo, I., Sharpe, R. L., and Boxall, J. B. (2013). “Influence of hydraulic regimes on bacterial community structure and composition in an experimental drinking water distribution system.” Water Res., 47(2), 503–516.
Einstein, H. A. (1950). “The bed-load function for sediment transportation in open channel flows.”, U.S. Dept. of Agriculture Soil Conservation Service, Washington, DC.
EPANET [Computer software]. U.S. Environmental Protection Agency, Washington, DC.
Ferguson, R. I., and Church, M. (2004). “A simple universal equation for grain settling velocity.” J. Sediment. Res., 74(6), 933–937.
Gúnther, M., Camhy, D., Steffelbauer, D., Neumayer, M., and Fuchs-Hanusch, D. (2014). “Showcasing a smart water network based on an experimental water distribution system.” Procedia Eng., 89, 311–317.
Gúnther, M., Steffelbauer, D., Neumayer, M., and Fuchs-Hanusch, D. (2015). “Experimental setup to examine leakage outflow in a scaled water distribution network.” Procedia Eng., 119, 450–457.
Meniconi, S., Brunone, B., Ferrante, M., and Massari, C. (2011). “Small amplitude sharp pressure waves to diagnose pipe systems.” Water Resour. Manage., 25(1), 79–96.
Reynolds, O. (1883). “An experimental investigation of the circumstances which determine whether the motion of water shall be direct or sinuous, and of the law of resistance in parallel channels.” Phil. Trans. R. Soc. Lond., 174, 935–982.
Shao, Y., Yang, Y. J., Jiang, L., Yu, T., and Shen, C. (2014). “Experimental testing and modeling analysis of solute mixing at water distribution pipe junctions.” Water Res., 56, 133–147.
Taylor, G. I. (1954). “The dispersion of matter in turbulent flow through a pipe.” Proc. R. Soc. A, 223(1155), 446–468.
Tejada, A., Horváth, K., Shiromoto, H. S., and Bosman, H. (2015). “Towards WaterLab: A test facility for new cyber-physical technologies in water distribution networks.” Proc., 1st ACM Int. Workshop on Cyber-Physical Systems for Smart Water Networks, Association for Computing Machinery, New York, 9:1–9:4.
van Genuchten, M. T., and Alves, W. J. (1982). “Analytical solutions of the on-dimensional convective-dispersive solute transport equation.”, U.S. Dept. of Agricultural Research Service, Washington, DC.
van Thienen, P., Vreeburg, J. H. G., and Blokker, E. J. M. (2011). “Radial transport processes as a precursor to particle deposition in drinking water distribution systems.” Water Res., 45(4), 1807–1817.
Vreeburg, J., and Boxall, J. (2007). “Discolouration in drinking water systems: A review.” Water Res., 41(3), 519–529.
Information & Authors
Information
Published In
Journal of Water Resources Planning and Management
Volume 143 • Issue 9 • September 2017
Copyright
©2017 American Society of Civil Engineers.
History
Received: Feb 8, 2016
Accepted: Mar 7, 2017
Published online: Jun 26, 2017
Published in print: Sep 1, 2017
Discussion open until: Nov 26, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.