Failure Impact Analysis of Isolation Valves in a Water Distribution Network
Publication: Journal of Water Resources Planning and Management
Volume 143, Issue 7
Abstract
Isolation valves are crucial components of water distribution systems for separating pipe segments from the network for repair or maintenance purpose. This paper looks at the impacts of isolation valve failure on three indictors, including number of valves needed to isolate a distribution system segment, size of distribution system segments, and shortfall in meeting demands during failure. A network with various isolation valve configurations in terms of valve density is used as a case study. The results obtained from the case study show that the failure of an isolation valve has substantially varying impacts on system performance during a shutdown. The valve density in the network determines the impacts of inoperable valves on a shutdown. Generally speaking, a higher density of isolation valves leads to the less impact of valve failure. Finally, several conclusions drawn from the critical valve analysis in this study can be applied to guide isolation valve maintenance and management.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
Bentley Systems provided the software to conduct the hydraulic simulation and valve segmentation. This study is financially supported by the National Natural Science Foundation of China (51320105010, 51579027), the National Science and Technology Major Project (2014ZX03005001), and the Ministry of Water Resource of China (Grant No. 201401014-2), which are greatly acknowledged. The authors thank three reviewers for their insightful and constructive comments, which helped significantly improve the paper.
References
Alvisi, S., Creaco, E., and Franchini, M. (2011). “Segment identification in water distribution systems.” Urban Water J., 8(4), 203–217.
Baird, G. M. (2011). “Managing assets: When going with the flow doesn’t save money.” J. Am. Water Works Assn., 103(9), 18.
Blokker, M., Pieterse-Quirijns, I., Postmus, E., Marmelo, V. M., and Lourenço, L. (2011). “Asset management of valves.” Water Asset Manage. Int., 7(4), 12–15.
Creaco, E., Franchini, M., and Alvisi, S. (2010). “Optimal placement of isolation valves in water distribution systems based on valve cost and weighted average demand shortfall.” Water Resour. Manage., 24(15), 4317–4338.
Creaco, E., Franchini, M., and Alvisi, S. (2012). “Evaluating water demand shortfalls in segment analysis.” Water Resour. Manage., 26(8), 2301–2321.
Deb, A. K., Snyder, J., Hammell, J. O., McCammon, S. B., and Jun, H. (2006). Criteria for valve location and system reliability, American Water Works Association Research Foundation, Denver.
Folwell, A. (1917). Water Supply Engineering, Wiley, London.
Fujiwara, O., and Ganesharajah, T. (1993). “Reliability assessment of water supply systems with storage and distribution networks.” Water Resour. Res., 29(8), 2917–2924.
Giustolisi, O., Kapelan, Z., and Savic, D. (2008). “Extended Period simulation analysis considering valve shutdowns.” J. Water Resour. Plann. Manage., 527–537.
Giustolisi, O., and Savic, D. (2010). “Identification of segments and optimal isolation valve system design in water distribution networks.” Urban Water J., 7(1), 1–15.
Giustolisi, O., Savic, D., and Kapelan, Z. (2008). “Pressure-driven demand and leakage simulation for water distribution networks.” J. Hydr. Eng., 626–635.
GLUMB (Great Lakes and Upper Mississippi River Board of State Public Health and Environmental Managers). (1992). Recommended standards for water works, Albany, NY.
Jun, H., and Loganathan, G. (2007). “Valve-controlled segments in water distribution systems.” J. Water Resour. Plann. Manage., 145–155.
Jun, H., Loganathan, G., Deb, A., Grayman, W., and Snyder, J. (2007). “Valve distribution and impact analysis in water distribution systems.” J. Environ. Eng., 790–799.
Kao, J.-J., and Li, P.-H. (2007). “A segment-based optimization model for water pipeline replacement.” J. Am. Water Works Assn., 99(7), 83–95.
Mugume, S. N., Gomez, D. E., Fu, G., Farmani, R., and Butler, D. (2015). “A global analysis approach for investigating structural resilience in urban drainage systems.” Water Res., 81, 15–26.
OptiValves [Computer software]. Innovyze InfoWorks, Monrovia, CA.
Rosenthal, L., Mesman, G., and De Koning, M. (2002). Key criteria for valve operation and maintenance, AWWA Research Foundation, Denver.
Trietsch, E., and Mesman, G. (2004). “Reliability of valves and section isolation.” Proc., 4th IWA World Water Congress and Exhibition, International Water Association, London, 1–8.
Trietsch, E., and Vreeburg, J. (2006). “Effect of valve failures on network reliability.” 8th Annual Water Distribution System Analysis Symp., ASCE, Reston, VA.
Trietsch, E. A., and Vreeburg, J. H. G. (2005). “Reliability of valves and section isolation.” Water Sci. Technol., 5(2), 47–51.
Tucciarelli, T., Criminisi, A., and Termini, D. (1999). “Leak analysis in pipeline systems by means of optimal valve regulation.” J. Hydr. Eng., 277–285.
Wagner, J. M., Shamir, U., and Marks, D. H. (1988). “Water distribution reliability: Simulation methods.” J. Water Resour. Plann. Manage., 276–294.
Walski, T., Weiler, J., and Culver, T. (2006). “Using criticality analysis to identify impact of valve location.” Water Distribution Systems Analysis Symp., ASCE, Reston, VA.
Walski, T. M. (1993). “Water distribution valve topology for reliability analysis.” Reliab. Eng. Syst. Saf., 42(1), 21–27.
Walski, T. M. (1994). “Valves and water distribution system reliability.” AWWA Annual Conf., Denver.
Walski, T. M. (2002). “Issues in providing reliability in water distribution systems.” Proc., ASCE Environmental and Water Resources Institute (EWRI) Annual Conf., ASCE, Reston, VA.
Walski, T. M. (2011). “How many isolation valves are needed in a water distribution systems.” Computers and Control in the Water Industry Conf., Exeter, U.K.
WaterGEMS [Computer software]. Bentley Systems, Exton, PA.
Wu, Z. Y., and Walski, T. (2006). “Pressure dependent hydraulic modelling for water distribution systems under abnormal conditions.” IWA World Water Congress, ASCE, Reston, VA.
Wu, Z. Y., Wang, R. H., Walski, T. M., Yang, S. Y., Bowdler, D., and Baggett, C. C. (2009). “Extended global-gradient algorithm for pressure-dependent water distribution analysis.” J. Water Resour. Plann. Manage., 13–22.
Zhuang, B., Lansey, K., and Kang, D. (2013). “Resilience/availability Analysis of municipal water distribution system incorporating adaptive pump operation.” J. Hydr. Eng., 527–537.
Information & Authors
Information
Published In
Copyright
©2017 American Society of Civil Engineers.
History
Received: May 18, 2016
Accepted: Nov 21, 2016
Published online: Mar 1, 2017
Published in print: Jul 1, 2017
Discussion open until: Aug 1, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.