Optimal Water Distribution Network Design Accounting for Valve Shutdowns
Publication: Journal of Water Resources Planning and Management
Volume 140, Issue 3
Abstract
The hydraulic system functioning is determined by the boundary conditions (e.g., network topology, pipe resistances/diameters, tank levels, status of control devices, and status of pumps). Shutdown of isolation valves to detach a portion of the hydraulic network for planned or unplanned works generates abnormal working conditions because of the induced topological modification of the network, which may reduce the hydraulic capacity of the water system with respect to the portions still connected. Thus, a challenge for network design is to optimize diameters versus system management under abnormal working conditions, i.e., accounting for the isolation valve system. To this purpose, a methodology for optimal system design accounting for valve shutdowns is herein presented. Because the optimization asks for the evaluation of network configurations that can be generated by the isolation valve system, a strategy to reduce the computational burden is required. In fact, the analysis of a large number of network configurations could be required in real-world applications. A strategy to evaluate only the critical configurations, i.e., those for which the hydraulic capacity becomes insufficient to satisfy water requests in the still connected network, and dominating configurations, i.e., those that are the most critical, is presented. The optimization procedure is explained and discussed using a small sized network, and the computational efficiency is demonstrated using a large sized network.
Get full access to this article
View all available purchase options and get full access to this article.
References
Alvisi, S., Creaco, E., and Franchini, M. (2011). “Segment identification in water distribution systems.” Urban Water, 8(4), 203–217.
Babayan, A. V., Kapelan, Z., Savic, D. A., and Walters, G. A. (2005). “Least cost design of robust water distribution networks under demand uncertainty.” J. Water Resour. Plann. Manage., 375–382.
Buchberger, S. G., and Wells, G. J. (1996). “Intensity, duration and frequency of residential water demands.” J. Water Resour. Plann. Manage., 11–19.
Creaco, E., Alvisi, S., and Franchini, M. (2011). “Comparison of procedures for assessing water demand shortfalls caused by segment isolation.” Proc., 11th Int. Conf. on Computing and Control in the Water Industry, D. Savic, Z. Kapelan, and D. Butler, eds., Univ. of Exeter, Exeter, U.K.
Farmani, R., Walters, G. A., and Savic, D. A. (2005). “Trade-off between total cost and reliability for any-town water distribution network.” J. Water Resour. Plann. Manage., 161–171.
Filion, Y. R., Adams, B. J., and Karney, B. W. (2007). “Stochastic design of water distribution systems with expected annual damages.” J. Water Resour. Plann. Manage., 244–252.
Filion, Y. R., and Jung, B. S. (2010). “Least-cost design of water distribution networks including fire damages.” J. Water Resour. Plann. Manage., 658–668.
Germanopoulos, G. (1985). “A technical note on the inclusion of pressure dependent demand and leakage terms in water supply network models.” Civ. Eng. Syst., 2(3), 171–179.
Giustolisi, O. (2010). “Considering actual pipe connections in WDN analysis.” J. Hydraul. Eng., 889–901.
Giustolisi, O., Kapelan, Z., and Savic, D. A. (2008a). “Extended period simulation analysis considering valve shutdowns.” J. Water Resour. Plann. Manage., 527–537.
Giustolisi, O., and Laucelli, D. (2011). “Water distribution network pressure-driven analysis using EGGA.” J. Water Resour. Plann. Manage., 498–510.
Giustolisi, O., Laucelli, D., and Colombo, A. F. (2009). “Deterministic vs. stochastic design of water distribution networks.” J. Water Resour. Plann. Manage., 117–127.
Giustolisi, O., and Savic, D. A. (2010). “Identification of segments and optimal isolation valve system design in water distribution networks.” Urban Water, 7(1), 1–15.
Giustolisi, O., Savic, D. A., and Kapelan, Z. (2008b). “Pressure-driven demand and leakage simulation for water distribution networks.” J. Hydraul. Eng., 626–635.
Giustolisi, O., and Walski, T. M. (2012). “Demand components in water distribution network analysis.” J. Water Resour. Plann. Manage., 356–367.
Gupta, R., and Bhave, P. R. (1996). “Comparison of methods for predicting deficient-network performance.” J. Water Resour. Plann. Manage., 214–217.
Jun, H., and Loganathan, G. V. (2007). “Valve-controlled segments in water distribution systems.” J. Water Resour. Plann. Manage., 145–155.
Kapelan, Z. S., Savic, D. A., and Walters, G. A. (2005). “Multi-objective design of water distribution systems under uncertainty.” Water Resour. Res., 41(11), 1–15.
Laucelli, D., and Giustolisi, O. (2011). “Scour depth modelling by a multi-objective evolutionary paradigm.” Environ. Model. Software, 26(4), 498–509.
Ostfeld, A. (2004). “Reliability analysis of water distribution systems.” J. Hydroinf., 6(4), 281–294.
Prasad, T. D., and Park, N.-S. (2004). “Multiobjective genetic algorithms for design of water distribution networks.” J. Water Resour. Plann. Manage., 73–82.
Savic, D. A., and Walters, G. A. (1997). “Genetic algorithms for the least-cost design of water distribution networks.” J. Water Resour. Plann. Manage., 67–77.
Setiadi, Y., Tanyimboh, T. T., and Templeman, A. B. (2005). “Modeling errors, entropy and hydraulic reliability of water distribution systems.” Adv. Eng. Softw., 36(11–12), 780–788.
Simpson, A., Dandy, G., and Murphy, L. (1994). “Genetic algorithms compared to other techniques for pipe optimization.” J. Water Resour. Plann. Manage., 423–443.
Todini, E. (2000). “Looped water distribution networks design using a resilience index based heuristic approach.” Urban Water, 2(2), 115–122.
Todini, E. (2003). “A more realistic approach to the extended period simulation of water distribution networks.” Advances in water supply management, Balkema, Lisse, The Netherlands, 173–184.
Tolson, B. A., Maier, H. R., Simpson, A. R., and Lence, B. J. (2004). “Genetic algorithms for reliability-based optimization of water distribution systems.” J. Water Resour. Plann. Manage., 63–72.
Torii, A. J., and Lopez, R. H. (2012). “Reliability analysis of water distribution networks using the adaptive response surface approach.” J. Hydraul. Eng., 227–236.
Vairavamoorthy, K., and Ali, M. (2000). “Optimal design of water distribution systems using genetic algorithms.” Comput. Aided Civ. Infrastruct. Eng., 15(5), 374–382.
Van Zyl, J., Savic, D. A., and Walters, G. A. (2004). “Operational optimization of water distribution systems using a hybrid genetic algorithm.” J. Water Resour. Plann. Manage., 160–170.
Wagner, J. M., Shamir, U., and Marks, D. H. (1988). “Water distribution systems reliability: Simulation methods.” J. Water Resour. Plann. Manage., 276–294.
Walski, T. M. (1993a). “Practical aspects of providing reliability in water distribution systems.” Reliab. Eng. Syst. Saf., 42(1), 13–19.
Walski, T. M. (1993b). “Water distribution valve topology.” Reliab. Eng. Syst. Saf., 42(1), 21–27.
Walski, T. M. (2001). “The wrong paradigm: Why water distribution optimization doesn’t work?” J. Water Resour. Plann. Manage., 203–205.
Walters, G. A., Halhal, D., Savic, D. A., and Ouazar, D. (1999). “Improved design of ‘Anytown’ distribution network using structured messy genetic algorithms.” Urban Water, 1(1), 23–38.
Wu, Z. Y., and Simpson, A. R. (2001). “Competent genetic-evolutionary optimization of water distribution systems.” J. Comput. Civ. Eng., 89–101.
Xu, C., Goulter, I., and Tickle, K. S. (1998). “Probabilistic hydraulic models for assessing capacity reliability of aging water distribution infrastructure.” Proc., Hydrastorm 98 Symp., The Institution of Engineers, Adelaide, Australia.
Xu, C., and Goulter, I. C. (1999). “Reliability-based optimal design of water distribution network.” J. Water Resour. Plann. Manage., 352–362.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Jun 12, 2012
Accepted: Oct 29, 2012
Published online: Oct 31, 2012
Discussion open until: Mar 31, 2013
Published in print: Mar 1, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.