Optimal Reliability-Based Design of Bulk Water Supply Systems
Publication: Journal of Water Resources Planning and Management
Volume 140, Issue 1
Abstract
The hydraulic reliability of bulk water-supply systems can be defined in terms of the failure frequency of the municipal storage tanks they supply: the system fails when the tank runs dry and is functional otherwise. Municipal storage tanks are normally sized according to deterministic guidelines that make allowances for balancing, fire and emergency storage. In this study, genetic algorithm (GA) optimization was used together with stochastic analyses to find the optimal combination of feeder pipe configuration, feeder pipe capacity and tank capacity for a given risk of failure. A sensitivity analysis was conducted to determine the factors that have the greatest impact on the optimal design for an example system. The results showed that the optimal pipe configuration is a single feeder pipe in most cases, but that two parallel pipes are preferable for shorter feeder pipes. It was found that it is often cost-effective to trade off a smaller tank size for a greater feeder pipe capacity. Based on this finding, design guidelines are likely to specify suboptimal solutions in many cases.
Get full access to this article
View all available purchase options and get full access to this article.
References
Beim, G. K., and Hobbs, B. F. (1988). “Analytical simulation of water system capacity reliability 2. A Markov Chain approach and verification of the models.” Water Resour. Res., 24(9), 1445–1458.
Cullinane, M. J., Lansey, K. E., and Mays, L. W. (1992). “Optimization-availability-based design of water-distribution networks.” J. Hydraul. Eng., 420–441.
Deb, K., Pratap, A., Agarwal, S., and Meyarivan, T. (2002). “A fast and elitist multiobjective genetic algorithm: NSGA-II.” IEEE Trans. Evol. Comput., 6(2), 182–197.
Farmani, R., Walters, G. A., and Savic, D. A. (2005). “Trade-off between total cost and reliability for Anytown water distribution network.” J. Water Resour. Plann. Manage., 161–171.
Goulter, I. C. (1992). “Systems analysis in water distribution network design: From theory to practice.” J. Water Resour. Plann. Manage., 238–248.
Hobbs, B. F., and Beim, G. K. (1988). “Analytical simulation of water system capacity reliability 1. Modified frequency-duration analysis.” Water Resour. Res., 24(9), 1431–1444.
Nel, D., and Haarhoff, J. (1996). “Sizing municipal water storage tanks with Monte Carlo simulation.” J. Water Supply: Research and Technology-AQUA, 45(4), 203–212.
Raad, D. N. (2010). “Multi-objective optimisation of water distribution systems design using metaheuristics.” Doctoral dissertation, Univ. of Stellenbosch, South Africa.
Swamee, P. K., and Sharma, A. K. (2008). Design of water supply pipe networks, Wiley, Hoboken, NJ.
van Zyl, J. E., and Haarhoff, J. (1999). “The effect of feeder pipe configuration on the reliability of bulk water supply systems.” Water Industry Systems: Modelling and Optimization Applications, Vol. 2, D. A. Savic and G. A. Walters, eds., Research Studies Press, Baldock, England, 205–215.
van Zyl, J. E., le Gat, Y., Piller, O., and Walski, T. M. (2012). “Impact of water demand parameters on the reliability of municipal storage tanks.” J. Water Resour. Plann. Manage., 553–561.
van Zyl, J. E., Piller, O., and le Gat, Y. (2008). “Sizing municipal storage tanks based on reliability criteria.” J. Water Resour. Plann. Manage., 548–555.
Vlok, G. (2010). “Optimal risk-based design of bulk water supply systems.” M.S. thesis, Univ. of Cape Town, South Africa.
Information & Authors
Information
Published In
Journal of Water Resources Planning and Management
Volume 140 • Issue 1 • January 2014
Pages: 32 - 39
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Nov 26, 2011
Accepted: Jun 5, 2012
Published online: Aug 17, 2012
Discussion open until: Jan 17, 2013
Published in print: Jan 1, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.