Prediction of Time-Dependent Temperature Distribution within the Pavement Surface Layer during FWD Testing
Publication: Journal of Transportation Engineering
Volume 142, Issue 7
Abstract
This paper presents an infinite series solution to predict the time-dependent temperature profile within the pavement surface layer on the basis of measured pavement surface temperature data during falling weight deflectometer (FWD) testing. The infinite series solution was derived using the method of eigenfunction expansions. The model validation was conducted based on the long-term pavement performance (LTPP) program FWD temperature data. The interpolatory trigonometric polynomials were used to approximate a pavement surface temperature history by using temperatures measured at different times during FWD testing. Total of 2,066 and 1,968 pavement subsurface temperatures within surface layers were predicted by using the derived infinite series solution for flexible and rigid pavements, respectively. These temperature profile predictions were compared with the measured pavement subsurface temperatures, showing that the proposed solution can rapidly and accurately predict the transient temperature profile within the pavement surface layer during the short time period of FWD testing with limited inputs.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This research was performed while the author held a National Research Council Research Associateship Award at the Turner-Fairbank Highway Research Center, Federal Highway Administration. The author thanks Dr. Huang-Hsiung Sean Lin for his help in extracting LTPP FWD temperature data in this study. The author also expresses his gratitude to Ms. Mary Deeney who proofread this paper.
References
Barber, E. S. (1957). “Calculation of maximum pavement temperatures from weather reports.”, National Research Council, Washington, DC, 1–8.
Boyce, W. E., and DiPrima, R. C. (2001). Elementary differential equations and boundary value problems, 7th Ed., Wiley, New York.
Burden, R. L., and Faires, J. D. (2001). Numerical analysis, 7th Ed., Brooks/Cole, Belmont, CA.
Carslaw, H. S., and Jaeger, J. C. (1959). Conduction of heat in solids, Oxford University Press, New York.
Dempsey, B. J., and Thompson, M. R. (1970). “A heat transfer model for evaluating frost action and temperature related effects in multilayered pavement systems.” Transp. Res. Rec., 342, 39–56.
FHWA (Federal Highway Administration). (2011). The long-term pavement performance program standard data release 25.0, McLean, VA.
Huang, Y. H. (2004). Pavement analysis and design, 2nd Ed., Pearson Education, New York.
Larson, G., and Dempsey, B. J. (1997). “Enhanced integrated climatic model, version 2.0.”, Minnesota Dept. of Transportation, Minneapolis.
Liang, R. Y., and Niu, Y.-Z. (1998). “Temperature and curling stress in concrete pavements: Analytical solution.” J. Transp. Eng., 91–100.
Liu, C., and Yuan, D. (2000). “Temperature distribution in layered road structures.” J. Transp. Eng., 93–95.
Lukanen, E. O., Stubstad, R. N., and Briggs, R. (2000). “Temperature predictions and adjustment factors for asphalt pavements.”, Federal Highway Administration, McLean, VA.
MATLAB 7 [Computer software]. MathWorks, Natick, MA.
Mindess, S., Young, J. F., and Darwin, D. (2003). Concrete, 2nd Ed., Pearson Education, Upper Saddle River, NJ.
Shao, L., Park, S. W., and Kim, Y. R. (1997). “Simplified procedure for prediction of asphalt pavement subsurface temperatures based on heat transfer theories.” Transp. Res. Rec., 1568, 114–123.
Solaimanian, M., and Kennedy, T. W. (1993). “Prediction maximum pavement surface temperature using maximum air temperature and hourly solar radiation.” Transp. Res. Rec., 1417, 1–11.
Straub, A. L., Schenck, H. N., Jr., and Przybycien, F. E. (1968). “Bituminous pavement temperature related to climate.” Transp. Res. Rec., 256, 53–77.
Strauss, W. A. (1992). Partial differential equations: An introduction, Wiley, New York.
Wu, G.-C. (1997). “The analytic theory of the temperature fields of bituminous pavement over semi-rigid roadbase.” J. Appl. Math. Mech., 18(2), 181–190.
Yavuzturk, C., Ksaibati, K., and Chiasson, A. D. (2005). “Assessment of temperature fluctuations in asphalt pavements due to thermal environmental conditions using a two-dimensional, transient finite-difference approach.” J. Mater. Civ. Eng., 465–475.
Yoder, E. J., and Witczak, M. W. (1975). Principles of pavement design, Wiley, New York.
Zauderer, E. (2006). Partial differential equations of applied mathematics, 3rd Ed., Wiley, New York.
Information & Authors
Information
Published In
Copyright
© 2016 American Society of Civil Engineers.
History
Received: Nov 16, 2015
Accepted: Jan 20, 2016
Published online: Mar 21, 2016
Published in print: Jul 1, 2016
Discussion open until: Aug 21, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.