Nonlinear Safety Analysis of a Running Road Vehicle under a Sudden Crosswind
Publication: Journal of Transportation Engineering
Volume 142, Issue 2
Abstract
Threats of wind gusts on the safety of road vehicles have been reported around the world, and extensive studies have been carried out to find the accident speeds of road vehicles under a sudden crosswind. However, most previous studies assume that the angular displacements of the vehicle are small and the mass moments of the vehicle remain unchanged during the overturning of the vehicle, yielding a quasi-linear safety analysis of a road-vehicle under a sudden crosswind. This study aims at a nonlinear safety analysis of a running road vehicle under a sudden crosswind by establishing nonlinear equations of motion of a wind-vehicle system. The assumptions adopted in the previous studies are no longer required, and tires can lose or resume contact with the ground. Wind loads on the vehicle are updated with the consideration of the time-varying attitude of the vehicle. The numerical example shows that the proposed nonlinear analysis procedure is more rational than the currently used approaches for progressive instability and the accident vehicle speed of road vehicles.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors wish to acknowledge the financial support from the open project of the Transport Industry Key Laboratory for Wind Resistance Technique in Bridge Engineering (KLWRTBMC14-02) to the first author, the Research Grants Council of the Hong Kong (PolyU 5311/07E) to the second author, and the Applied Basic Research Projects of the Ministry of Transport (2014319J13100) and the Sichuan Province Youth Science and Technology Innovation Team (2015TD0004) to the third author.
References
Alipour, K., and Moosavian, S. A. A. (2012). “Effect of terrain traction, suspension stiffness and grasp posture on the tip-over stability of wheeled robots with multiple arms.” Adv. Robot., 26(8–9), 817–842.
Ammon, D. (1992). “Problems in road surface modeling.” Vehicle Syst. Dyn., 20(Suppl. 1), 28–41.
Baker, C., Cheli, F., Orellana, A., Paradot, N., Proppe, C., and Rocchi, D. (2009). “Cross-wind effects on road and rail vehicles.” Vehicle Syst. Dyn., 47(8), 983–1022.
Baker, C. J. (1986). “A simplified analysis of various types of wind-induced road vehicle accidents.” J. Wind Eng. Ind. Aerod., 22(1), 69–85.
Baker, C. J. (1987). “Measures to control vehicle movement at exposed sites during windy periods.” J. Wind Eng. Ind. Aerod., 25(2), 151–161.
Baker, C. J. (1988). “High sided articulated road vehicles in strong cross winds.” J. Wind Eng. Ind. Aerod., 31(1), 67–85.
Baker, C. J. (1993). “The behaviour of road vehicles in unsteady cross winds.” J. Wind Eng. Ind. Aerod., 49(1–3), 439–448.
Bogsjö, K. (2008). “Coherence of road roughness in left and right wheel-path.” Vehicle Syst. Dyn., 46(Suppl. 1), 599–609.
Cheli, F., Belforte, P., Melzi, S., Sabbioni, E., and Tomasini, G. (2006). “Numerical-experimental approach for evaluating cross-wind aerodynamic effects on heavy vehicles.” Vehicle Syst. Dyn., 44(Suppl. 1), 791–804.
Chen, S. R., and Chen, F. (2010). “Simulation-based assessment of vehicle safety behavior under hazardous driving conditions.” J Transp. Eng., 304–315.
Dugoff, H., Fancher, P. S., and Segel, L. (1970). “An analysis of tire traction properties and their influence on vehicle dynamic performance.” SAE Paper, 25.
Heath, A. N. (1989). “Modeling and simulation of road roughness.” Suppl. Vehicle Syst. Dyn., 18(5), 275–284.
ISO. (1995). “Mechanical vibration— Road surface profiles—Reporting of measured data.” ISO 8608:1995(E).
Kamash, K. M. A., and Robson, J. D. (1978). “The application of isotropy in road surface modeling.” J Sound Vib., 57(1), 89–100.
Phillips, W. F. (2010). Mechanics of flight, 2nd Ed., Wiley, Hoboken, NJ.
Pi, D. W., Chen, N., Wang, J. X., and Zhang, B. J. (2011). “Design and evaluation of sideslip angle observer for vehicle stability control.” Int. J. Automot. Techn., 12(3), 391–399.
Proppe, C., and Wetzel, C. (2010). “A probabilistic approach for assessing the crosswind stability of ground vehicles.” Vehicle Syst. Dyn., 48(Suppl. 1), 411–428.
Qi, Z., Taheri, S., Wang, B., and Yu, H. (2015). “Estimation of the tyre-road maximum friction coefficient and slip slope based on a novel tyre model.” Vehicle Syst. Dyn., 53(4), 506–525.
Rajamani, R. (2005). Vehicle dynamics and control, Springer, New York.
SAE (Society of Automotive Engineers). (2008). “Vehicle dynamics terminology.”.
Shinozuka, M. (1971). “Simulation of multivariate and multidimensional random process.” J. Acoust. Soc. Am., 49(1), 357–368.
Sun, L., and Deng, X. (1998). “Predicting vertical dynamics loads caused by vehicle–pavement interaction.” J. Transp. Eng., 470–478.
Sun, L., and Su, J. (2001). “Modeling random fields of road surface irregularities.” Road Mater. Pavement, 2(1), 49–70.
Wang, B., Xu, Y. L., Zhu, L. D., and Li, Y. L. (2014). “Crosswind effects on high-sided road vehicles with and without movement.” Wind Struct., 18(2), 155–180.
Xu, Y. L., and Guo, W. H. (2003). “Dynamic behaviour of high-sided road vehicles subject to a sudden crosswind gust.” Wind Struct., 6(5), 325–346.
Zhao, L. H., Liu, Z. Y., and Chen, H. (2011). “Design of a nonlinear observer for vehicle velocity estimation and experiments.” IEEE T. Contr. Syst. T., 19(3), 664–672.
Information & Authors
Information
Published In
Copyright
© 2015 American Society of Civil Engineers.
History
Received: Feb 20, 2015
Accepted: Aug 31, 2015
Published online: Nov 4, 2015
Published in print: Feb 1, 2016
Discussion open until: Apr 4, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.