Maximum Curving Speed
Publication: Journal of Transportation Engineering
Volume 140, Issue 4
Abstract
Full equilibrium superelevations are rarely installed on tracks. Consequently, trains run on unbalanced superelevations. Currently, the maximum curving speed is modeled with blanket unbalanced superelevations. Blanket unbalanced superelevations are not desirable for all actual superelevations, regardless of their values. In this paper, the maximum curving speed is modeled to ensure comfort and safety, considering two primary parameters: the curve parameters and the vehicle characteristics. The curve parameters include radius and actual superelevation, and the vehicle characteristics include the height of the center of gravity (c.g.) on top of the rail and the suspension factor. The proposed model has interesting features. It suggests that unbalanced superelevation is proportional to actual superelevation. The maximum curving speed is evaluated against the normal operating speed as the base reference. The model is applied and validated from the point of view of both comfort and safety. The paper suggests a method to divide equilibrium superelevation into actual and unbalanced superelevations.
Get full access to this article
View all available purchase options and get full access to this article.
References
Ahlf, R. (2003). “Characteristic of railway location and operation, Fundamentals of railway engineering, light rail transit, rapid transit, and commuter rail systems, Univ. of Wisconsin-Extension (UNEX), Pyle Center, Madison, WI, 38.
City of Calgary. (2009). “LRT design guide line.” Section 3-Track alignment: Exhibit 3.3.4a, Calgary, Canada.
Esveld, C. (2001). Modern railway technology, MRT-Productions, The Netherlands, 38, 39, 61.
Federal Railroad Administration (FRA). (2008). Title 49, code of federal regulations, Railway Educational Bureau, Omaha, NE.
Hasan, N. (2011). “Maximum allowable speed on curve.” Proc. of Joint Rail Conf., American Society of Mechanical Engineers, New York, 8.
International Union of Railways (UIC). (1989). “Layout characteristics for lines used by fast passenger trains.”, 2nd Ed., Paris, 8–9.
International Union of Railways (UIC). (1981). “Geometry of points and crossings with UIC rails permitting speeds of or more on the diverging track.”, Paris, 5.
Transit Cooperative Research Program (TCRP). (2000). “Track design handbook for light rail transit.”, National Academy Press, Washington, DC.
Transit Cooperative Research Program (TCRP). (2012). “Track design handbook for light rail transit.”, National Academy Press, Washington, DC.
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Aug 12, 2013
Accepted: Nov 14, 2013
Published online: Dec 26, 2013
Published in print: Apr 1, 2014
Discussion open until: May 26, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.