Technical Papers
Sep 5, 2013

Safety Analysis of Horizontal Curves Using Real Traffic Data

Publication: Journal of Transportation Engineering
Volume 140, Issue 4

Abstract

Researchers are still seeking a better understanding of the parameters that affect safety in horizontal curves. Curves are one of the most critical sections of the road network contributing to a high percentage of serious runoff accidents and lane-changing crashes. Moreover, driving in curves requires combined control of both steering and speed, taking into account the dynamic response and limits of the car. The objectives of this study were to evaluate the safety performance of horizontal curves by analyzing vehicle dynamic signals, such as lateral acceleration and speed, as well as quantitative analysis of lane-changing maneuvers. The study uses real traffic environments where driver behavior and vehicle response data were recorded and stored during regular operations without subjecting the driver to any experimental controls. A total of 96 curves, equally distributed for left and right turn directions, have been collected and grouped according to their radii. The analysis identified frequent overtaking and lane-change maneuvers on the curves, of which 20% more lane changes occurred on right curves than on left curves. Lane-change maneuvers also increased significantly with increasing curve radius. The curve entrance was found to be the most dangerous segment of a curve. Current design practice assumes the safety risk is constant when driving along horizontal curves. The results also showed that drivers consider curve radius in choosing their driving speed rather than the posted speed limit of the curves. The study showed how road design influences the driver’s strategy by establishing links between curve features, vehicle dynamic responses, and the driver’s behavior. Analyzing road characteristics gave insight into how road geometry affects the vehicle dynamics relevant to safety and driving strategy through curves. The findings are useful inputs for reviewing curve design, selecting appropriate countermeasures, and improving active safety devices.

Get full access to this article

View all available purchase options and get full access to this article.

References

Ali, A. (2010). “Effective safety factors on horizontal curves of two-lane highways.” J. Appl. Sci., 10(22), 2814–2822.
Bonneson, J., Lord, D., Zimmerman, K., Fitzpatrick, K., and Pratt, M. (2007a). “Development of tools for evaluating the safety implications of highway design decisions.”, Texas Transportation Institute, College Station, TX.
Bonneson, J., Pratt, M., Miles, J., and Carlson, P. (2007b). “Development of guidelines for establishing effective curve advisory speeds.”. Texas Transportation Institute, College Station, TX.
Charlton, S. G., and de Pont, J. J. (2007). “Curve speed management.” Research Report 323, Land Transport New Zealand, Wellington, New Zealand. 〈http://www.ltsa.govt.nz/research/reports/323.pdf〉 (Oct. 14, 2009).
Donnell, E., Hines, S., Mahoney, K., Porter, R., and McGee, H. (2009). “Speed concepts: Informational guide.”, U.S. Federal Highway Administration, Dept. of Transportation, Washington, DC.
Dupré, G., and Bisson, O. (2007). “Safety in curves on urban express roads.” Internal Report for Deliverable 2.1, European Commission 6th Framework Project Ranking for European Road Safety (RANKERS),.
Emmerson, J. (1969). “Speeds of cars on sharp horizontal curves.” Traffic Eng. Contr., 11(3), 135–137.
Felipe, E., and Navin, F. (1998). “Automobiles on horizontal curves: Experiments and observations.” J. Transp. Res. Rec., (1628), 50–56.
Fitzpatrick, K., Lord, D., and Park, B.-J. (2010). “Horizontal curve accident modification factor with consideration of driveway density on rural four-lane highways in Texas.” J. Transp. Eng., 827–835.
Granlund, J. (2010). “Safer curves on multiple lane roads.” Vectura Consulting, Sweden, Transport Research Arena Europe, Brussels.
Gupta, R. C., and Jain, R. P. (1975). “Effect of certain roadway characteristics on accident rates for two-lane roads in Connecticut.” Transportation Research Record 541, Transportation Research Board, Washington, DC, 50–54.
Johnston, I. R. (1982). “Modifying driver behaviour on rural road curves: A review of recent research.” Proc., 11th Australian Road Research Board (ARRB) Conf., Vol. 11, ARRB Group Limited, 115–1124.
Leonard, J., Bilse, D., and Recker, W. (1994). “Super-elevation rates at rural highway intersections.”, Univ. of Carolina, Institute of Transportation Studies, Irvine CA.
Norušis, J. M. (2011). “IBM SPSS statistics 19 guide to data analysis.” SPSS, Prentice Hall.
Odhams, A., and Cole, D. (2004). “Models of driver speed choice in curves.” Proc., 7th Int. Symp. on Advanced Vehicle Control (AVEC 04), Arnhem, Netherlands, 439–444.
Othman, S., Thomson, R., and Lannér, G. (2009). “Identifying critical road geometry parameters affecting crash rate and crash type.” Ann. Adv. Automot. Med., 53, 155–165.
Othman, S., Thomson, R., and Lannér, G. (2012). “Using naturalistic field operational test data to identify horizontal curves.” J. Transp. Eng., 1151–1160.
Reymond, G., Kemeny, A., Droulez, J., and Berthoz, A. (2001). “Role of lateral acceleration in curve driving: Driver model and experiments on a real vehicle and a driving simulator.” J. Hum. Factors Ergon. Soc., 43(3), 483–495.
Torbic, D. J., et al. (2004). “Guidance for implementation of the AASHTO strategic highway safety plan. Volume 7: A guide for reducing collisions on horizontal curves.”, Transportation Research Board, Washington, DC.
Victor, T., Moeschlin, F., Hjälmdahl, M., and Ahlström, C. (2010). “Sweden-Michigan naturalistic field operational test (SeMiFOT).” Evaluation of Methodology, Chalmers Univ., Göteborg, Sweden.
Wong, J. Y. (2001). Theory of ground vehicles, Dept. of Mechanical Aerospace Engineering, Carleton Univ., Ottawa.

Information & Authors

Information

Published In

Go to Journal of Transportation Engineering
Journal of Transportation Engineering
Volume 140Issue 4April 2014

History

Received: Jul 14, 2011
Accepted: Sep 3, 2013
Published online: Sep 5, 2013
Published in print: Apr 1, 2014
Discussion open until: Jul 3, 2014

Permissions

Request permissions for this article.

Authors

Affiliations

Sarbaz Othman, Ph.D. [email protected]
Dept. of Applied Mechanics, Chalmers Univ. of Technology, SE-412 96 Gothenburg, Sweden (corresponding author). E-mail: [email protected]
Robert Thomson [email protected]
Professor, Researcher, Swedish National Road and Transport Research Institute, Box 8072, SE-402 78 Gothenburg, Sweden. E-mail: [email protected]
Gunnar Lannér [email protected]
Senior Lecturer, Head of Civil Engineering Dept., Dept. of Civil Engineering, Chalmers Univ. of Technology, SE-412 96 Gothenburg, Sweden. E-mail: [email protected]

Metrics & Citations

Metrics

Citations

Download citation

If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.

Cited by

View Options

Get Access

Access content

Please select your options to get access

Log in/Register Log in via your institution (Shibboleth)
ASCE Members: Please log in to see member pricing

Purchase

Save for later Information on ASCE Library Cards
ASCE Library Cards let you download journal articles, proceedings papers, and available book chapters across the entire ASCE Library platform. ASCE Library Cards remain active for 24 months or until all downloads are used. Note: This content will be debited as one download at time of checkout.

Terms of Use: ASCE Library Cards are for individual, personal use only. Reselling, republishing, or forwarding the materials to libraries or reading rooms is prohibited.
ASCE Library Card (5 downloads)
$105.00
Add to cart
ASCE Library Card (20 downloads)
$280.00
Add to cart
Buy Single Article
$35.00
Add to cart

Get Access

Access content

Please select your options to get access

Log in/Register Log in via your institution (Shibboleth)
ASCE Members: Please log in to see member pricing

Purchase

Save for later Information on ASCE Library Cards
ASCE Library Cards let you download journal articles, proceedings papers, and available book chapters across the entire ASCE Library platform. ASCE Library Cards remain active for 24 months or until all downloads are used. Note: This content will be debited as one download at time of checkout.

Terms of Use: ASCE Library Cards are for individual, personal use only. Reselling, republishing, or forwarding the materials to libraries or reading rooms is prohibited.
ASCE Library Card (5 downloads)
$105.00
Add to cart
ASCE Library Card (20 downloads)
$280.00
Add to cart
Buy Single Article
$35.00
Add to cart

Media

Figures

Other

Tables

Share

Share

Copy the content Link

Share with email

Email a colleague

Share