Investigating Seismic Behavior of Ballasted Railway Track in Earthquake Excitation Using Finite-Element Model in Three-Dimensional Space
This article has a reply.
VIEW THE REPLYThis article has a reply.
VIEW THE REPLYPublication: Journal of Transportation Engineering
Volume 139, Issue 7
Abstract
In this paper, a finite-element (FE) model including the track super- and substructure components was developed for seismic analysis of railway track. In the developed model, the beam elements were used to define rails and sleepers as components of track superstructures. Moreover, a series of lumped masses with springs and dashpots was considered for modeling the ballast, subballast, and subgrade as track substructure components. In order to validate the FE model, the results of seismic numerical analysis were compared with the outputs of a shaking table test. In the next stage, using the validated FE model, the efficient excited length of the track during the Kobe earthquake was determined around 40 m as the length that created the maximum internal forces and deformations in track components. Finally, using the evaluated effective length and adopting the artificial accelerograms with various peak ground acceleration (PGA) values in the range of 2 to 10 (200 to 1,000 Gal) as input motion, the seismic behavior of the ballasted railway track was studied, and consequently the effect of PGA values on rail buckling length and its deformations as well as rail and sleeper internal forces were investigated.
Get full access to this article
View all available purchase options and get full access to this article.
References
Ahlbeck, D. R., Kish, A., and Sluz, A. (1986). “An assessment of design criteria for continuous-welded rail on elevated transit structures.” Transportation Research Record 1071, Transportation Research Board, Washington, DC.
Ahlbeck, D. R., Meachamand, H. C., and Prause, R. H. (1978). “The development of analytical models for railroad track dynamics.” Railroad track mechanics & technology, A. D. Kerr, ed., Pergamon, Oxford.
Arias, A. (1970). “A measure of earthquake intensity.” Seismic design for nuclear power plants, R. J. Hansen, ed., MIT Press, Cambridge, MA, 438–483.
Fredrick, C. O., and Newton, S. G. (1977). “The relationship between traffic and track damage: The effect of vertical loads.” British Railways Boards Research and Development Division Technical Note TN.T.2., BR Research Reports, Advisory Group for Rail Research and Innovation, UK.
Grassie, S. L., Gregory, R. W., and Johnson, K. L. (1982). “The dynamic response of railway track to high frequency lateral excitation.” J. Mech. Eng. Sci., 24(2), 91–95.
Housner, G. W., and Lili, X. (2002). “Report on the great Tangshan earthquake of 1967.” Chapter 1, Railway engineering, Vol. III, Earthquake Engineering Research Laboratory, California Institute of Technology, Pasadena, CA, 1–60.
Iran Management and Planning Organization. (2005). Railway Track Super Structure General Technical Specifications, No. 301, Ministry of Road and Transportation, Transportation Research Institute, Iran.
Ishida, M., and Suzuki, T. (2005). “Effect on track settlement of interaction excited by leading and trailing axles.” Q. Rep. RTRI, 46(1), 1–6.
Ishida, M., Suzuki, T., Koro, K., and Abe, K. (2005). “Measurement on dynamic behavior of track near rail joints and prediction of track settlement.” Q. Rep. of RTRI, 46(2), 124–129.
Jenkins, H. H., Stephenson, J. E., Clatton, G. A., Morland, J. W., and Lyon, D. (1974). “The effect of track and vehicle parameters on wheel/rail vertical dynamic forces.” Railway Eng. J., 3(1), 2–16.
Jiang, G., Liu, X., Zhang, J., and Zhao, R. (2007). “Shaking table test of composite foundation reinforcement of saturated silty soil for high speed railway.” Front. Architect. Civ. Eng. China, 1(3), 353–360.
Kumakura, T., Ishii, H., and Konishi, T. (2010). “Seismic assessment of ballasted tracks in large-scale earthquakes.” JR EAST Tech. Rev. Japan, 17, 25–28.
Nakamura, T., Sekine, E., and Shirae, Y. (2011). “Assessment of aseismic performance of ballasted track for large-scale shaking table test.” RTRI Rep., 52(3), 156–162.
Sato, Y., Odaka, T., and Takai, H. (1988). “Theoretical analyses on vibration of ballasted track.” Q. Rep. RTRI, 29(1) 30–32.
Sekine, E., and Ishikawa, T. (2005). “Deformation characteristics of ballasted track during earthquake.” RTRI Rep. Japan, 19(2), 23–28.
Suarez, L. E., and Montejo, A. (2005). “Generation of artificial earthquakes via the wavelet transform.” Int. J. Solids Struct., 42(21–22), 5905–5919.
Sun, Y. Q., and Dhanasekar, M. (2002). “A dynamic model for the vertical interaction of the rail track and wagon system.” Int. J. Solids Struct., 39(5), 1337–1359.
Trifunac, M. D., and Brady, A. G. (1975). “A study on the duration of strong earthquake ground motion.” Bull. Seismol. Soc. Am., 65(3), 581–626.
Vostroukhov, A. V., and Metrikine, A. V. (2003). “Periodically supported beam on a visco-elastic layer as a model for dynamic analysis of a high-speed railway track.” Int. J. Solids Struct., 40(21), 5723–5752.
Zhai, W. M., Wang, K. Y., and Lin, J. H. (2004). “Modeling and experiment of railway ballast vibrations.” J. Sound Vib., 270(4–5), 673–683.
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Jul 18, 2012
Accepted: Dec 26, 2012
Published online: Dec 29, 2012
Published in print: Jul 1, 2013
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.