Unified Mechanistic Approach for Modeling Tests of Unbound Pavement Materials
Publication: Journal of Transportation Engineering
Volume 138, Issue 9
Abstract
Several tests are used for the characterization of unbound materials for pavement applications. The resilient modulus has been one of the most common tests for design specification of unbound materials. The California bearing ratio (CBR) is another laboratory test that is frequently used. The dynamic cone penetrometer (DCP) test is a more common test for in situ quality assessment/quality control of unbound materials. For better connection between design and quality assurance (QA)/quality control (QC), it would be helpful to have a reliable, mechanistic method for correlating test results. This is particularly true for the use of new materials, for which there is not an extensive body of data to empirically draw such connections. This paper presents a framework for a unified approach for modeling these tests. A discrete-element method (DEM) is used to simulate the CBR test, the DCP test, and the resilient modulus test. An initial evaluation demonstrated that the simulations can account for the effect of aggregate shape, size, gradation, friction, and stiffness. As such, this methodology shows promise for the development of mechanistic-based correlation between test results. These results are presented, along with some limitations of the current model and challenges for the future.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors gratefully acknowledge Minnesota Dept. of Transportation (MN-DOT) for funding through project #1573; helpful discussions with members of the Technical Advisor Panel, including John Siekmeier, Lee Amundson, and Nelson Cruz; and Jiafeng Zhang.
References
AASHTO. (1993). Guide for design of pavement structures, Washington, DC.
AASHTO. (1999). “Standard method of test for determining the resilient modulus of soils and aggregate materials.”, Washington, DC.
AASHTO. (2010). “Standard method of test for the California bearing ratio.”, Washington, DC.
Abbas, A., Masad, E., Papagiannakis, T., and Harman, T. (2007). “Micromechanical modeling of the viscoelastic behavior of asphalt mixtures using the discrete-element method.” Int. J. Geomech., 7(2), 131–139.
Asaf, Z., Shmulevich, I., and Rubinstein, D. (2006). “Predicting soil-rigid wheel performance using distinct element methods.” Trans. ASABE, 49(3), 607–616.
Buttlar, W. G., and You, Z. (2001). “Discrete element modeling of asphalt concrete.” J. Transp. Res. Board, 1757, 111–118.
Cundall, P. A., and Strack, O. D. L. (1979). “A numerical model for granular assemblies.” Géotechnique, 29(1), 47–65.
Desai, C. S., and Siriwardane, H. J. (1984). Constitutive laws for engineering materials, with emphasis on geologic materials, Prentice-Hall, Englewood Cliffs, NJ.
Dobry, R., and Ng, T.-T. (1992). “Discrete modeling of stress-strain behavior of media at small and large strain.” Eng. Comput., 9(2), 129–143.
Federal Aviation Administration (FAA). (1995). “Airport pavement design and rehabilitation.”, Washington, DC.
Federal Highway Administration (FHwA). (1996). “Resilient modulus of unbound granular base/subbase materials and subgrade soils.”, Washington, DC.
Ford, G. R., and Eliason, B. E. (1992). Comparison of compaction methods in narrow subsurface drainage trenches, Minnesota Dept. of Transportation, St. Paul, MN.
Fortin, J., Millet, O., and de Saxce, G. (2005). “Numerical simulation of granular materials by an improved discrete element method.” Int. J. Numer. Methods Eng., 62(5), 639–663.
Hertz, H. (1896). “Über die berührung fester elastischer Körper [On the contact of rigid elastic solids].” Miscellaneous original papers, Trans. D. E. Jones and G. A. Schott, Macmillan, London, 146–162.
Hill, K. M., and Zhang, J. (2008). “Kinematics of densely flowing granular mixtures.” Phys. Rev. E, 77(6), 061303.
Johnson, K. L. (1985). Contact mechanics, Cambridge University Press, Cambridge, UK.
Khogali, W., and Zeghal, M. (2003). “A comprehensive system for characterizing granular materials: Providing material input for pavement design.” Rep., Institute for Research in Construction, National Research Council, Canada.
Lobo, L.-G. S., and Vallejo, L. E. (2005). “Discrete element method evaluation of granular crushing under direct shear test conditions.” J. Geotech. Geoenviron. Eng., 131(10), 1295–1300.
Lu, M., and McDowell, G. R. (2006). “Discrete element modeling of ballast abrasion.” Géotechnique, 56(9), 651–655.
Mindlin, R. D., and Deresiewicz, H. (1953). “Elastic spheres in contact under varying oblique forces.” J. Appl. Mech., 20(3), 327–344.
Munjiza, A. (2004). The combined finite-discrete element method, Wiley, West Sussex, UK.
National Cooperative Highway Research Program (NCHRP). (2002). “Recommended standard method for routine resilient modulus testing of unbound granular base/subbase materials and subgrade soils.”, Washington, DC.
National Cooperative Highway Research Program (NCHRP). (2004). “Guide for mechanistic-empirical design of new and rehabilitated pavement structures.”, Washington, DC.
National Cooperative Highway Research Program (NCHRP). (2007a). Local calibration guidance for the recommended guide for mechanistic-empirical design of new and rehabilitated pavement structures, Washington, DC.
National Cooperative Highway Research Program (NCHRP). (2007b). “The mechanistic-empirical pavement design guide.” 〈http://www.trb.org/mepdg/〉 (Jul. 20, 2007).
Nezami, E. G., and Hashash, Y. M. A. (2002). “The use of static discrete element method to simulate biaxial compression test.” Geotech. Spec. Publ., 117, 294–298.
Ng, T.-T. (2004). “Triaxial test simulation with discrete element method and hydrostatic boundaries.” J. Eng. Mech., 130(10), 1188–1194.
Ng, T.-T., and Dobry, R. (1992). “A non-linear numerical model for soil mechanics.” Int. J. Numer. Anal. Methods Geomech., 16(4), 247–263.
Ng, T.-T., and Dobry, R. (1994). “A numerical simulation of monotonic and cyclic loading of granular soil.” J. Geotech. Eng., 120(2), 388–403.
Ng, T.-T., and Wang, C. W. (2001). “Comparison of 3D DEM simulation with MRI data.” Int. J. Numer. Anal. Methods Geomech., 25(5), 497–507.
PFC3D [Computer software]. (2007). Itasca Consulting Group. 〈http://www.itascacg.com/offices_icg.html〉 (Dec. 5, 2007).
Siekmeier, J. et al. (2009). “Using the dynamic cone penetrometer and light weight deflectometer for construction quality assurance.”, Minnesota Dept. of Transportation, St. Paul, MN.
Tanka, H., Momozu, M., Oida, A., and Yamazaki, M. (2000). “Simulation of soil deformation and resistance at the bar penetration by the distinct element method.” J. Terramechanics, 37(1), 41–56.
Thomas, P. A., and Bray, J. D. (1999). “Capturing nonspherical shape of granular media with disk clusters.” J. Geotech. Geoenviron. Eng., 125(3), 169–178.
Thornton, C. (1991). “Interparticle sliding in the presence of adhesion.” J. Phys. D: Appl. Phys., 24(11), 1942–1946.
Ting, J. M., Meachum, L., and Rowell, J. D. (1995). “Effect of particle shape on the strength and deformation of mechanism of ellipse-shaped granular assemblages.” Eng. Comput., 12(2), 99–108.
Tsuji, Y., Tanaka, T., and Ishida, T. (1992). “Lagrangian numerical simulation of plug flow of cohesionless particles in a horizontal pipe.” Powder Technol., 71(3), 239–250.
Ullidtz, P. (2001). “Distinct element method for study of failure in cohesive particulate media.” J. Transp. Res. Board, 1757, 127–133.
Uthus, L., Hopkins, M. A., and Horvli, I. (2008). “Discrete element modelling of the resilient behaviour of unbound granular aggregates.” Int. J. Pavement Eng., 9(6), 387–395.
Uzan, J. (1989). JULEA linear elastic analysis computer program, U.S. Army Waterways Experiment Station, Vicksburg, MS.
Vallejo, L. E., Lobo-Guerrero, S., and Hammer, K. (2006). “Degradation of a granular base under a flexible pavement: DEM simulation.” Int. J. Geomech., 6(6), 435–439.
de Vet, S. J., Yohannes, B., Hill, K. M., and de Bruyn, J. R. (2010). “The collapse of a rectangular well in a quasi-two dimensional granular bed.” Phys. Rev. E, 82(4), 041304.
Walton, O. R., and Braun, R. L. (1986). “Stress calculation for assemblies of inelastic spheres and in uniform shear.” Acta Mech., 63(1–4), 73–86.
You, Z., and Buttlar, W. G. (2005). “Application of discrete element modeling techniques to predict complex modulus of asphalt-aggregate hollow cylinders subjected to internal pressure.” J. Transp. Res. Board, 1929, 218–226.
You, Z., and Buttlar, W. G. (2006). “Micromechanical modeling approach to predict compressive dynamic moduli of asphalt mixtures using the distinct element method.” J. Trans. Resp. Board, 1970, 73–83.
Zeghal, M. (2004). “Discrete-element method investigation of the resilient behavior of granular materials.” J. Transp. Eng., 130(4), 503–509.
Zuo, S.-C., Yong, X., Quan-wen, Y., and Feng, Y. T. (2006). “Discrete element simulation of the behavior of bulk granular material during truck braking.” Eng. Comput., 23(1), 4–15.
Information & Authors
Information
Published In
Journal of Transportation Engineering
Volume 138 • Issue 9 • September 2012
Pages: 1091 - 1098
Copyright
© 2012 American Society of Civil Engineers.
History
Received: Feb 25, 2011
Accepted: Jan 6, 2012
Published online: Jan 9, 2012
Published in print: Sep 1, 2012
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.