Alternative Methodology for Determining Gap Acceptance for Two-Way Stop-Controlled Intersections
Publication: Journal of Transportation Engineering
Volume 138, Issue 5
Abstract
Vehicles approaching a two-way, stop-controlled intersection from the minor roadway will wait for a large enough gap in the traffic on the major roadway before entering the intersection. The primary method for modeling intersections for both safety and operations is to determine a critical gap size such that a vehicle waiting at the stop sign will enter the intersection if the gap on the major roadway is larger than the critical gap. The method that is currently most accepted for measuring the critical gap is a maximum likelihood estimation developed by Troutbeck. The Troutbeck method may yield biased results and cannot be used with data sets that contain only rejected gaps. This paper proposes an alternative model for estimating the critical gap that is unbiased and can be used with naturalistic data. The proposed model requires that the gap distribution of the major street be known. This proposed model is compared with the Troutbeck model through a Monte-Carlo simulation. The proposed model yields accurate estimates of the mean critical gap as long as accurate estimates of the major street traffic are used.
Get full access to this article
View all available purchase options and get full access to this article.
References
American Association of State Highway and Transportation Officials (AASHTO). (2001). A policy on geometric design of highways and streets, AASHTO, Washington, DC.
Dingus, T. A., et al. (2006). The 100-car naturalistic driving study, Phase II—Results of the 100-car field experiment, (Contract No. DTNH22-00-C-07007). National Highway Traffic Safety Administration, Washington, DC.
Gattis, J., and Low, S. (1999). “Gap acceptance at atypical stop-controlled intersections.” J. Transp. Eng.JTPEDI, 125(3), 201–207.
Hamed, M., Easa, S., and Batayneh, R. (1997). “Disaggregate gap—acceptance model for unsignalized —intersections.” J. Transp. Eng.JTPEDI, 123(1), 36–42.
Harwood, D., Mason, J., Brydia, R., Pietrucha, M., and Gittings, G. (1996). National Cooperative Highway Research Program (NCHRP) Rep. 383, Transportation Research Board, Washington, DC.
Kaysi, I., and Alam, G. (2000). “Driver behavior and traffic stream interactions at unsignalized intersections.” J. Transp. Eng.JTPEDI, 126(6), 498–505.
Khattak, A., and Jovanis, P. (1990). “Capacity and delay estimation for priority unsignalized intersections: Conceptual and empirical issues.” Transportation Research Record 1287, Transportation Research Board, Washington, DC, 129–137.
Kyte, M., et al. (1997). “Capacity and level of service at unsignalized intersections.” National Cooperative Highway Research Program (NCHRP) Project 3-46, Web document 5. 〈http://www.nap.edu/catalog.php?record_id=6340#toc〉 (Mar. 5, 2009).
Lerner, N., Huey, R., McGee, J., and Sullivan, A. (1995). “Older driver perception reaction time for intersection sight distance and object detection.” Rep. No. FHWA-RD-93-168, Federal Highway Administration, Washington, DC.
May, A. D. (1990). Traffic flow fundamentals, Prentice-Hall, Upper Saddle River, NJ.
Tian, Z., et al. (2000). “A further investigation on critical gap and follow-up time.” Transportation Research Circular E-C018: 4th Int. Symp. on Highway Capacity, Transportation Research Board, Washington, DC, 397–408.
Transportation Research Board(TRB). (2000). Highway capacity manual, National Research Council, Washington, DC.
Troutbeck, R. J. (1992). “Estimating the critical acceptance gap from traffic movements.” Physical Infrastructure Center Rep., Queensland Univ. of Technology, Queensland, Australia.
Xu, F., and Tian, Z. (2008). “Driver behavior and gap—acceptance characteristics at roundabouts in California.” Transportation Research Record: Journal of the Transportation Research Board, No. 2071, Transportation Research Board of the National Academies, Washington, DC, 117–124.
Information & Authors
Information
Published In
Copyright
© 2012. American Society of Civil Engineers.
History
Received: Mar 4, 2010
Accepted: Sep 12, 2011
Published online: Sep 14, 2011
Published in print: May 1, 2012
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.