Local Calibration and Implementation of the Mechanistic-Empirical Pavement Design Guide for Flexible Pavement Design
Publication: Journal of Transportation Engineering
Volume 138, Issue 3
Abstract
This paper presents the results of the calibration and implementation of the Mechanistic-Empirical Pavement Design Guide (MEPDG) for the design of flexible pavements in Italy. Local input data for traffic, climate, materials, and subgrade (foundation soil) are evaluated and subsequently arranged, as required by the MEPDG to be used in the associated software. The coefficients of the distress models are derived by means of a comparison between the performances predicted by the MEDPG and those predicted by theoretical equations, which are believed to represent the local distress process of a pavement and/or assumptions prevalently made in Italy. A wide parametric analysis is performed so that the influence in design process attributed to load spectra, temperature, dynamic modulus of asphalt concrete, and resilient modulus of subgrade is shown. The results obtained from MEPDG are compared, according to the hypothesis of zero-maintenance during the service life of a pavement, to those derived from using a local mechanistic-empirical method. As a consequence, the difference between these two design methods is quantified. For a verification of the results obtained from the MEPDG, the 1993 AASHTO guide is used. Subsequently, by using the MEPDG for rehabilitation, a maintenance strategy based on two resurfacings of wearing course of pavement is also investigated, and its effect on the extension of service life of a pavement in contrast with zero-maintenance is shown. Therefore, this work provides the knowledge for locally implementing the MEPDG with significant success both for the assumption of zero-maintenance and resurfacing treatments during the service life of a pavement.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The author would like to thank the three anonymous referees whose comments proved invaluable.
References
American Association of State Highway Officials (AASHO). (1962). “The AASHO road test.” Rep. No. 5, Pavement Research, National Academy of Science, National Research Council, Washington, D.C.
AASHTO. (1972). Interim guide for design of pavement structures, Washington, D.C.
AASHTO. (1986). AASHTO guide for design of pavement structures, Washington, D.C.
AASHTO. (1993). AASHTO guide for design of pavement structures, Washington, D.C.
AASHTO. (2008). Mechanistic-empirical pavement design guide, a manual of practice, AASHTO, Washington, D.C.
Barber, E. W. S. (1957). “Calculation of maximum pavement temperatures from weather reports.” Bulletin 168, Highway Research Board, Washington, DC.
Caliendo, C. (2004). “Comparison of AASHTO and design criterion based on the strain of subgrade.” CUES, 〈http://www.unilibro.it/〉 (Mar. 30, 2010), 1–17.
Carvalho, R. L., and Schwartz, C. W. (2006). “Comparison of flexible pavement designs: AASHTO empirical VS. NCHRP 1-37A mechanistic-empirical.” Transportation Research Record 1947, Transportation Research Board, Washington, D.C., 167–174.
Federal Highway Administration (FHwA). (2001). “Traffic monitoring guide.” FHWA-PL-01-021, Washington, D.C.
Gardiner, M. S., Turochy, R. E., and Carter, A. (2007). “Influence of various material and traffic input on flexible pavement design methods for alabama roadways.” J. Transp. Eng., 133(8), 455–461.
Jackson, N., and Puccinelli, J. (2006). “Long-term pavement performance (LTPP) data analysis support: National pooled fund study TPF-5(013).” Report No. FHWA-HRT-06-121, Federal Highway Administration (FHwA), Washington, D.C.
Johanneck, L., and Khazanovich, L. (2010). “A comprehensive evaluation of the effect of climate in MEPDG predictions.” Proc., of the 89th Transportation Research Board Annual Meeting (CD-ROM), Transportation Research Board, Washington, D.C.
Kang, M., and Adams, T. M. (2007). “Local calibration for fatigue cracking models used in the mechanistic-empirical pavement design.” Proc., of the 2007 Mid-Continent Transportation Research Symp., Iowa State Univ., Ames, IA.
Kim, D., Nantung, T., Siddiki, N. Z., and Kim, J. R. (2007). “Implementation of the new mechanistic-empirical design for subgrade materials—Indiana experience.” Proc., of the 86th Transportation Research Board Annual Meeting (CD-ROM), Transportation Research Board, Washington, D.C.
Mehta, Y. A., Sauber, R. W., Owad, J., and Krause, J. (2008). “Lessons learned during implementation of mechanistic-empirical pavement design guide.” Proc., of the 87th Transportation Research Board Annual Meeting (CD-ROM), Transportation Research Board, Washington, D.C.
MEPDG software, Version 1.0. (2007). “Mechanistic-empirical pavement design guide.” 〈http://www.trb.org/medpg〉 (Jul. 30, 2009).
National Cooperative Highway Research Program (NCHRP). (2004). Guide for mechanistic-empirical design of new and rehabilitated pavement structures, Transportation Research Board, Washington, D.C.
National Cooperative Highway Research Program (NCHRP). (2006). “Changes to the mechanistic-empirical pavement design guide software through version. 0,9.” Research Results Digest 308, Transportation Research Board, Washington, D.C.
National Council for Research. (1995). “Catalogue of road pavements.” Bull.178, Rome.
Qing, L., Zhang, Y., and Harvey, J. T. (2007). “Analysis of truck traffic growth for mechanistic-empirical pavement design guide.” Proc., 86th Transportation Research Board Annual Meeting (CD-ROM), Transportation Research Board, Washington, D.C.
Robinette, C., and William, C. (2006). “Pavement design analysis using the 2002 design guide software.” Proc., 85th Transportation Research Board Annual Meeting (CD-ROM), Transportation Research Board, Washington, D.C.
Souliman, M. I., Mamlouk, M. S., El-Basyouny, M. M., and Zapata, C. E. (2010). “Calibration of the AASHTO MEPDG for flexible pavement for arizona conditions.” Proc., 89th Transportation Research Board Annual Meeting (CD-ROM), Transportation Research Board, Washington, D.C.
Swan, D. J., Tradiff, R., Hajek, J. J., and Hein, D. K. (2008). “Development of regional traffic data for mechanistic-empirical pavement design.” Transportation Research Record 2049, Transportation Research Board, Washington, D.C., 54–62.
Uzan, J. (2004). “Permanent deformation in flexible pavements.” J. Transp. Eng., 130(1), 6–13.
Velasquez, R., et al. (2009). “Implementation of the MEPDG for new and rehabilitated pavement structures for design of concrete and Asphalt pavements in Minnesota.” Final rep. published by Minnesota Dept. of Transportation, Research Service Section, St. Paul, MN.
Witzack, M. W., and Fonseca, O. A. (1996). “Revised predictive model for dynamic (complex) modulus of asphalt mixtures.” Transportation Research Record 1540, Transportation Research Board, Washington, D.C., 15–23.
Information & Authors
Information
Published In
Journal of Transportation Engineering
Volume 138 • Issue 3 • March 2012
Pages: 348 - 360
Copyright
© 2012 American Society of Civil Engineers.
History
Received: Dec 23, 2010
Accepted: Jul 18, 2011
Published online: Jul 20, 2011
Published in print: Mar 1, 2012
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.