Linear Mixed-Effects Models for Paint Pavement-Marking Retroreflectivity Data
Publication: Journal of Transportation Engineering
Volume 137, Issue 10
Abstract
The objective of this paper is to present an improved paint pavement-marking retroreflectivity degradation model. Previous degradation-modeling methods were reviewed and studied. The paint-marking retroreflectivity data were collected on 25 two-lane rural highways in North Carolina from November 2007 to May 2010. A linear mixed-effects model (LMEM) was selected as most appropriate for the paint-marking retroreflectivity data. The LMEM took into account the correlation among repeated measurements of the data set and produced more accurate predictions than other methods. LMEMs were established for white edge and yellow center paint pavement markings. The LMEM results showed that the estimated white edge pavement marking life cycle is 37.5 months and yellow center marking life cycle is 38.9 months on average when using 100 and as the minimum acceptable retroreflectivity values for white and yellow paint markings. A model comparison indicated that the LMEM provided a more accurate prediction than linear-regression models when multiple retroreflectivity measurements are collected on a specific road.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The writers acknowledge the sponsorship of this research by the UNSPECIFIEDNorth Carolina Department of Transportation and the assistance of NCDOT personnel during the project. The writers also would like to acknowledge the assistance of Mr. Paul Ku, Mr. Bryan Kearns, and Ms. Juhi Jain for their help with field data collection.
References
AASHTO. (2004). A policy on geometric design of highways and streets, 5th Ed., AASHTO, Washington, DC, 294–295.
Abboud, N., and Bowman, B. L. (2002). “Cost and longevity-based scheduling of paint and thermoplastic striping.” Transp. Res. Rec. 1794, 55–62.
Andrady, A. L. (1997). “Pavement marking materials: Assessing environment-friendly performance.” NCHRP Rep. 392, Transportation Research Board, Washington, DC.
ASTM. (2001). “Standard practice for describing retroreflection.” ASTM E 808, West Conshohoken, PA.
ASTM. (2005). “Standard test method for measurement of retroreflective pavement marking materials with CEN-prescribed geometry using a portable retroreflectometer.” ASTM E 1710-05, West Conshohoken, PA.
ASTM. (2009). “New proposed standard for pavement marking to reflect changes.” 〈http://www.astm.org/SNEWS/JF_2008/pavement_jf08.html〉 (Aug. 15, 2009).
Davidian, M. (2005). “Applied longitudinal data analysis lecture notes,” North Carolina State Univ., Raleigh, NC, 〈http://www.stat.ncsu.edu/people/davidian/courses/st732/notes/toc.pdf〉.
Federal Highway Administration (FHWA). (2003). Manual on uniform traffic control devices for streets and highways (MUCTD), U.S. DOT, Washington, DC, Chapter 3A-3B.
Federal Highway Administration (FHWA). (2009). Proposed pavement marking retroreflectivity MUTCD text, U.S. DOT, Washington, DC.
Hawkins, N. R., Smadi, O. G., and Hans, Z. N. (2006). “Planning, developing, and implementation the Iowa pavement marking management system (IPMMS): Phases I and II.” MTC Project 2004-02, U.S. DOT, Washington, DC.
Lee, J., Maleck, T. L., and Taylor, W. C. (1999). “Pavement marking material study in Michigan.” ITE J., 69(7), 44–50.
Migletz, J., and Graham, J. (2002). “Long-term pavement marking practices.” NCHRP Synthesis 306, Transportation Research Board, Washington, DC.
North Carolina DOT (NCDOT). (2007). “Highway and roadway mileage report.” NCDOT, Raleigh, NC.
North Carolina DOT (NCDOT). (2008). “Pavement marking rodeo certification study guide.” Work Zone Traffic Control Unit, N. Raleigh, NC.
Perrin, J. Jr., Martin, P. T., and Hansen, B. G. (1998). “A comparative analysis of pavement marking materials.” Transportation Research Board Annual Meeting (CD-ROM), Transportation Research Board, Washington, DC, Paper No. 98-130.
Rasdorf, W., Zhang, G., and Hummer, J. (2009). “The impact of directionality on paint pavement marking retroreflectivity.” Pub. Works Manage. Pol., 13(3), 265–277.
Sarasua, W. A., Clarke, D. B., and Davis, W. J. (2003). “Evaluation of interstate pavement marking retroreflectivity.” Rep. No. FHWA-SC-03-01, Transportation Research Board, Washington, DC.
Sathyanarayanan, S., Shankar, V., and Donnell, E. T. (2008). “A Weibull analysis of pavement marking retroreflectivity inspection data.” Transportation Research Board Annual Meeting (CD-ROM), Transportation Research Board, Washington, DC.
Sitzabee, W., Hummer, J., and Rasdorf, W. (2009a). “Pavement marking degradation modeling and analysis.” J. Infrastruct. Syst., 15(3), 190–199.
Sitzabee, W., Rasdorf, W., Hummer, J., and Devine, H. (2009b). “Pavement marking data model: A case for asset management.” J. Comput. Civ. Eng., 23(5), 288–298.
Yu, J., Chou, E., and Luo, Z. (2007). “Development of linear mixed effects models for predicting individual pavement conditions.” J. Transp. Eng., 133(6), 347–354.
Zhang, G., Hummer, J., and Rasdorf, W. (2010). “The impact of bead density on paint pavement marking retroreflectivity.” J. Transp. Eng., 136(8), 773–781.
Zhang, Y., and Wu, D. (2005). “Development of methodologies to predict service lives of pavement marking materials.” Transportation Research Board Annual Meeting (CD-ROM), Transportation Research Board, Washington, DC, Paper No. 05–2587.
Information & Authors
Information
Published In
Copyright
© 2011 American Society of Civil Engineers.
History
Received: Oct 19, 2009
Accepted: Apr 7, 2011
Published online: Apr 11, 2011
Published in print: Oct 1, 2011
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.