Nonlinear Mixed-Effects Model for the Evaluation and Prediction of Pavement Deterioration
Publication: Journal of Transportation Engineering
Volume 138, Issue 2
Abstract
Pavement deterioration models are important inputs for pavement management systems (PMS). These models are based on the study of performance data, and they provide the evolution law of pavement deterioration. Performance data consist of observations of pavement section conditions, and are collected through several follow-up campaigns on road networks. To characterize the pavement deterioration process, several statistical methods have been developed at the Laboratoire Central des Ponts et Chaussées (LCPC). However, these methods are suboptimal for modeling the evolution of pavement deterioration, as they ignore unit-specific random effects and potential correlation among repeated measurements. This paper presents a nonlinear mixed-effects model enabling accounting for the correlation between observations on the same pavement section. On the basis of this nonlinear mixed-effects modeling, we investigate and identify structural and climatic factors that explain differences in the parameters between pavement sections, and quantify the impact of these factors on pavement evolution. The proposed model provides a good fit for describing the evolution law of different pavement sections. The performance of this model is assessed using simulated and real data.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors would like to thank the Ministère des Transports du Québec for providing the experimental data.
References
Akaike, H. (1974). “A new look at the statistical model identification.” IEEE Trans. Autom. Control, 19(6), 716–723.
Archilla, A. R., and Madanat, S. (2001). “A statistical model of pavement rutting in asphalt concrete mixes.” Transportation Research Record, National Research Council, Washington, DC.
Courilleau, E., and Marion, J. M. (1999). “Comparaison de modèles d’estimation de la fonction de survie appliquée à des données routiéres.” Revue de statistique appliquee, 47(1), 81–97.
Davidian, M., and Giltinan, D. M. (1995). Nonlinear models for repeated measurement data, Chapman and Hall, London.
Diggle, P. J. (1994). Analysis of longitudinal data, Oxford University Press, New York.
Khraibani, H., Lorino, T., Lepert, P., and Marion, J. M. (2009). “Comparison of parametric and mixed-effect models for the evaluation of pavement deterioration testing results.” 6th Int. Conf. on Maintenance and Rehabilitation of Pavements and Technological Control, Politecnico di Torino, Italy, 2, 1027–1036.
Laird, N. M., and Ware, J. H. (1982). “Random-effects models for longitudinal data.” Biometrics, 38(4), 963–974.
Laboratoire Central des Ponts et Chaussées-Service d’études sur les transports, les routes et leurs aménagements (LCPC-SETRA). (1994). “Conception et dimensionnement des structures de chaussée.” Guide technique LCPC-SETRA.
Lepert, P., Leroux, D., and Savard, Y. (2003). “Use of pavement performance models to improve efficiency of data collection procedures.” 3rd Int. Symp. on Maintenance and Rehabilitation of Pavement and Technological Control, Univ. of Minho, Portugal.
Lepert, P., and Riouall, A. (2002). “Identification de modèles d’évolution par régression non linéaire (méthode indirecte).” Cooperation project franco-québécois, Laboratoire Central des Ponts et Chaussées-Ministère des Transports du Québec (LCPC-MTQ).
Lepert, P., Savard, Y., Leroux, D., and Rèche, M. (2004). “Statistical methods used for predicting pavement evolution.” Bulletin des Laboratoires des Ponts et Chaussées, 250–251, 13–31.
Leroux, D. (2003). “Identification de modèles d’évolution par régression non linéaire multivariables (méthode directe).” Cooperation project franco-québécois, Laboratoire Central des Ponts et Chaussées-Ministère des Transports du Québec (LCPC-MTQ).
Leroux, D., Lepert, P., Rèche, M., and Savard, Y. (2004). “Comparison of three statistical methods for fatigue cracking prediction.” 83rd TRB Annual Meeting, Washington, DC.
Lindstrom, M. J., and Bates, D. M. (1990). “Nonlinear mixed-effects models for repeated measures data.” Biometrics, 46(3), 673–687.
Lorino, T., Lepert, P., and Riouall, P. (2006). “Application of statistical methods for analysing pavement evolution in the IQRN quality campaign.” Bulletin des Laboratoires des Ponts et Chaussées.
Onar, A., Thomas, F., Choubane, B., and Byron, T. (2006). “Statistical mixed effects models for evaluation and prediction of accelerated pavement testing results.” Transp. Eng. J., 132(10), 771–780.
Pinheiro, J. C., and Bates, D. M. (1995). “Approximations to the loglikelihood function in the nonlinear mixed-effects model.” J. Comput. Graph. Stat., 4(1), 12–35.
Pinheiro, J. C., and Bates, D. M. (2000). Mixed-effects models in and S-PLUS, Springer, New York.
Rèche, M. (2004). “Effet des travaux d’entretien sur les lois d’évolutions des dégradations des chaussées.” Ph.D. thesis, Univ. of Blaise Pascal-Clermont II, Clermont-Ferrand, France.
S-PLUS [Computer software]. TIBCO Software, Inc., Palo Alto, CA.
Schwarz, G. (1978). “Estimating the dimension of a model.” Ann. Statist., 6(2), 461–464.
Vonesh, E. F., and Chinchilli, V. M. (1997). “Linear and nonlinear models for the analysis of repeated measures.” Marcel Dekker, New York.
Ware, J. H. (1985). “Linear models for the analysis of longitudinal studies.” Ann. Statist., 39(2), 95–101.
Yuan, X., and Pandey, M. (2009). “A nonlinear mixed-effects model for degradation data obtained from in-service inspections.” Reliab. Eng. Syst. Saf., 94(2), 509–519.
Information & Authors
Information
Published In
Copyright
© 2012 American Society of Civil Engineers.
History
Received: Feb 15, 2010
Accepted: Dec 28, 2010
Published online: Dec 30, 2010
Published in print: Feb 1, 2012
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.