Optimal Train Operation for Minimum Energy Consumption Considering Track Alignment, Speed Limit, and Schedule Adherence
Publication: Journal of Transportation Engineering
Volume 137, Issue 9
Abstract
Developing an optimal train speed profile for energy-efficient train operation is significant in both theory and applications but very difficult and complex to achieve. An optimization method that minimizes energy consumption by considering track alignment, speed limit, and schedule adherence is proposed. The objective function is total energy consumption, and the decision variables include the timing of train motion regimes. A simulated annealing algorithm (SA) is developed to search for the optimal train operation or “golden run.” The developed model is applied to a segment of the New Haven line of the Metro-North Commuter Railroad, which runs between Woodlawn, New York, and New Haven, Connecticut. A sensitivity analysis is conducted, and the relationship between model parameters and decision variables are explored.
Get full access to this article
View all available purchase options and get full access to this article.
References
Bocharnikov, Y. V., Tobias, A. M., Roberts, C., Hillmansen, S., and Goodman, C. J. (2007). “Optimal driving strategy for traction energy saving on DC suburban railways.” IET Electr. Power Appl., 1(5), 675–682.
Bureau of Transportation Statistics (BTS). (2010). “National transportation statistics.” 〈http://www.bts.gov/publications/national_transportation_statistics/〉 (May 18, 2010).
Chang, C. S., and Sim, S. S. (1997). “Optimising train movements through coast control using genetic algorithms.” IEE Proc.: Electr. Power Appl., 144(1), 65–73.
Cole, C. (1998). “Improvement to wagon connection modeling for longitudinal train simulation.” Proc., Conf. on Railway Engineering: Engineering Innovation for a Competitive Edge, Institute of Engineers, Rockhampton, Australia, 187–194.
Davis, S., Diegel, S., and Boundy, R. (2009). “Transportation energy data book: Edition 28.” Technical Rep. No. ORNL/TM-2009/149 to Office of Energy Efficiency and Renewable Energy, Oak Ridge National Laboratory, Oak Ridge, TN.
Dongen, L. A. M., and Schuit, J. H. (1989). “Energy-efficient driving patterns in electric railway traction.” IEE Conf. Publ., 312, 154–158.
Energy Information Administration. (2009). “Average revenue per kilowatt-hour from retail sales to ultimate consumers—Estimated by sector, by state.” 〈http://www.eia.doe.gov/cneaf/electricity/epm/table5_6_a.html〉 (Aug. 18, 2009).
Franke, R., Terwiesch, P., and Meyer, M. (2000). “An algorithm for the optimal control of the driving of trains.” Proc. of the 39th IEEE Conf. on Decision and Control, Vol. 3, Sydney, Australia, 2123–2128.
Federal Aviation Administration. (2005). “Advisory calculator—Aircraft weight and balance control.” Flight standard service, Washington, DC.
Golovitcher, I. M. (2001). “Energy efficient control of rail vehicles. Systems, man, and cybernetics.” Proc., IEEE Int. Conf., Vol. 1, Tucson, AZ, 658–663.
Hay, W. W. (1982). Railroad engineering, 2nd Ed., Wiley, New York.
Hoberock, L. L. (1977). “A survey of longitudinal acceleration comfort studies in ground transportation vehicles.” J. Dyn. Syst., Meas., Control, 99(2), 76–84.
Hopkins, J. B. (1975). “Railroads and the environment-estimation of fuel consumption in rail transportation. Volume I: Analytical model.” Final Rep. No. FRA-OR&D-75-74.I to U.S. Federal Railroad Administration, Rep. No. PB-244150, National Technical Information Service, Springfield, VA.
Hwang, H. S. (1998). “Control strategy for optimal compromise between trip time and energy consumption in a high-speed railway.” IEEE Trans. Syst. Man Cybern. Part A: Syst. Hum., 28(6), 791–802.
International Union of Railway (UIC). (2010). “Energy efficient technologies for railways.” 〈http://www.railway-energy.org/tfee/index.php?ID=210〉 (May 21, 2010).
Kim, K., and Chien, S. (2010). “Simulation-based analysis of train controls under various track alignment.” J. Transp. Eng., 136(11), 937–948.
Koo, S. L., Tan, H. S., and Tomizuka, M. (2006). “Analysis of vehicle longitudinal dynamics for longitudinal ride comfort.” Proc., Dynamic Systems and Control Division, ASME, Chicago, 431–439.
Mellitt, B., Goodman, C. J., and Rambukwella, N. B. (1987). “Optimization of chopper equipment for minimizing energy consumption in rapid transit systems.” Proc., IEE Conf. on Railways in the Electronic Age, London, 34–41.
Oettich, S., Albrecht, T., and Scholz, S. (2004). “Improvements of energy efficiency of urban rapid rail systems.” Proc. of Urban Transport X: Urban Transport and the Environment in the 21st Century, WIT, Southampton, UK, 573–582.
Vuchic, V. R. (2007). Urban transit system and technology, Wiley, New York.
Wong, K. K., and Ho, T. K. (2004). “Dynamic coast control of train movement with genetic algorithm.” Int. J. Syst. Sci., 35(13–14), 835–846.
Yasukawa, S., Fujita, S., Hasebe, T., and Sato, K. (1987). “Development of an on-board energy saving train operation system for the Shinkansen electric railcars.” Quarterly Rep. of RTRI, 28(2–4), 54–62.
Information & Authors
Information
Published In
Copyright
© 2011 American Society of Civil Engineers.
History
Received: Jul 8, 2010
Accepted: Dec 1, 2010
Published online: Dec 3, 2010
Published in print: Sep 1, 2011
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.