Effects of Temperature and Moisture Gradients on Slab Deformation for Jointed Plain Concrete Pavements
Publication: Journal of Transportation Engineering
Volume 137, Issue 8
Abstract
Slab curvature, which represents the response of concrete pavement slabs to environmental loads, influences the location and magnitude of critical slab stresses and affects long-term pavement performance. The purpose of this study was to measure the changes in temperature and moisture profiles in a newly constructed concrete pavement and to determine both the overall deformed shapes of the slabs as well as the relative contributions of built-in and transient environmental effects over time. Data were collected from an instrumented jointed plain concrete pavement (JPCP) over a 2-year period. Slab curvatures were computed or predicted using measurements of temperature and moisture conditions in the slab, static strain measurements, and pavement surface profile measurements. It was found that the additional restraint provided by the dowel and tie bars does not appear to significantly reduce slab curvature resulting from daily temperature fluctuations or from reversible drying shrinkage. It does have a substantial effect on reducing slab curvature attributable to long-term drying shrinkage. It was also found that the Mechanistic-Empirical Pavement Design Guide default value is close to that measured in this study for the restrained slab but does not appear to be appropriate for unrestrained (i.e., undoweled) slabs.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors would like to thank the Pennsylvania Department of Transportation (PennDOT) and the Federal Highway Administration (FHWA)FHA for their financial support of this study. In addition, the authors would like to thank all of the graduate and undergraduate students who assisted with this research effort.
References
Applied Research Associates, Inc. (ARA), ERES Consultants Division. (2004). Guide for mechanistic-empirical design of new and rehabilitated pavement structures. Final Rep., National Cooperative Highway Research Program, Transportation Research Board, National Research Council, Champaign, IL.
Asbahan, R. E. (2009). “Effects of the built-in construction gradient and environmental conditions on jointed plain concrete pavements.” Ph.D. dissertation, Swanson School of Engineering, Univ. of Pittsburgh.
Asbahan, R. E., McCracken, J. K., and Vandenbossche, J. M. (2006). “S.R.-22 smart pavement phase II: One-year material properties and pavement response characteristics for jointed plain concrete pavements.” Technical Rep. submitted to the Pennsylvania Dept. of Transportation and the Federal Highway Administration, Dept. of Civil and Environmental Engineering, Univ. of Pittsburgh.
Eisenmann, J., and Leykauf, G. (1990). “Simplified calculation method of slab curling caused by surface shrinkage.” Proc. 2nd Int. Workshop on Theoretical Design of Concrete Pavements, Netherlands Centre For Research And Contract Standardization In Civil And Traffic Engineering (CROW), Amsterdam, Netherlands, 185–197.
Face Construction Technologies, Inc. (2004). Dipfloor 6.1. User’s guide, Face Construction Technologies, Inc., Norfolk, VA.
Grasley, Z. C., Lange, D. A., and D’Ambrosia, M. D. (2003). “Internal relative humidity and drying stress gradients in concrete.” Proc. Engineering Conf. Int., Advances in Cement and Concrete IX, Engineering Conferences International, Inc.New York.
Gutierrez, J. J. (2008). “Evaluating the JPCP cracking model of the mechanistic-empirical pavement design guide.” M.S. thesis, Civil and Environmental Engineering Program, Univ. of Pittsburgh.
Hansen, W., Wei, Y., Smiley, D. L., Peng, Y., and Jansen, E. A. (2006). “Effects of paving conditions on built-in curling and pavement performance.” Int. J. Pavement Eng., 7(4), 291–296.
Jeong, J.-H., and Zollinger, D. G. (2005). “Environmental effects on the behavior of jointed plain concrete pavements.” J. Transp. Eng., 131(2), 140–148.
McCracken, J., Asbahan, R., and Vandenbossche, J. (2008). “Pavement response characteristics for jointed plain concrete pavements.” S.R.-22 Smart Pavement Phase II Final Rep. submitted to the Pennsylvania Dept. of Transportation and the Federal Highway Administration, Dept. of Civil and Environmental Engineering, Univ. of Pittsburgh, Pittsburgh.
Mohamed, A. R., and Hansen, W. (1997). “Effect of nonlinear temperature gradient on curling stress in concrete pavements.” Transportation Research Record 1568, Transportation Research Board, Washington, DC, 65–71.
Rao, S., and Roesler, R. R. (2005). “Characterizing effective built-in curling from concrete pavement field measurements.” J. Transp. Eng., 131(4), 320–327.
Ruiz, J. M., Kim, P. J., Schindler, A. K., and Rasmussen, R. O. (2001). “Validation of HIPERPAV for prediction of early-age jointed concrete pavement behavior.” Transportation Research Record 1778, Transportation Research Board, Washington, DC, 17–25.
Vandenbossche, J. M. (2003). “Interpreting falling weight deflectometer results for curled and warped portland cement concrete pavements.” Ph.D. dissertation, Civil Engineering, Univ. of Minnesota, Minneapolis.
Wells, S. A., Phillips, B. M., and Vandenbossche, J. M. (2005). “S.R.-22 smart pavement phase I: Early-age material properties and pavement response characteristics for jointed plain concrete pavements.” 28-Day Rep. Final Revision, submitted to the Pennsylvania Dept. of Transportation and the Federal Highway Administration, Dept. of Civil and Environmental Engineering, Univ. of Pittsburgh.
Wells, S. A., Phillips, B. M., and Vandenbossche, J. M. (2006). “Quantifying built-in construction gradients and early-age slab deformation caused by environmental loads in a jointed plain concrete pavement.” Int. J. Pavement Eng., 7(4), 275–289.
Yu, H. T., and Khazanovich, L. (2001). “Effects of construction curling on concrete pavement behavior.” Proc. 7th Int. Conf. on Concrete Pavements, International Society for Concrete Pavements (ISCP), 55–67.
Yu, H. T., Smith, K. D., Darter, M. I., Jiang, J. and Khazanovich, L. (1998). “Performance of concrete pavements volume III—Improving concrete pavement performance.” Final Rep., FHWA-RD-95-111, Federal Highway Administration, McLean, VA.
Information & Authors
Information
Published In
Copyright
© 2011 American Society of Civil Engineers.
History
Received: Oct 16, 2009
Accepted: Oct 8, 2010
Published online: Jul 15, 2011
Published in print: Aug 1, 2011
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.