Impact of Driver Compliance on the Safety and Operational Impacts of Freeway Variable Speed Limit Systems
Publication: Journal of Transportation Engineering
Volume 137, Issue 4
Abstract
Variable speed limit (VSL) systems enable freeway system managers to change the posted speed limit on a section of roadway in response to varying conditions. VSL system goals may include homogenizing traffic flow, improving safety, and/or reducing driver stress. Although it is understood that the effectiveness of VSL systems is impacted by the level of driver compliance, which itself is influenced by the extent of speed limit enforcement, very little is known about the strength of these impacts. This paper uses a simulation model to evaluate the sensitivity of the safety and operational impacts of VSL to driver compliance. Several scenarios for driver compliance were modeled using the PARAMICS microscopic traffic simulator. Findings indicated that VSL impacts are very sensitive to the level of driver compliance. Safety was shown to be positively correlated with the level of compliance, and travel time was shown to be negatively correlated. However, it was also found that the magnitude of the impact is strongly influenced by the VSL control strategy (i.e., set of rules for incrementing and decrementing the speed limits) being used. Therefore, selection of the VSL control strategy cannot be done independently of the decision regarding speed limit enforcement.
Get full access to this article
View all available purchase options and get full access to this article.
References
Abdel-Aty, M., Cunningham, J., Gayah, V. V., and Hsia, L. (2008). “Dynamic variable speed limit strategies for real-time crash risk reduction on freeways.” Transportation Research Record 2078, Transportation Research Board, Washington, DC, 108–116.
Allaby, P. (2006). “An evaluation of the safety and operational impacts of a candidate variable speed limit control strategy on an urban freeway.” M.S. thesis, Civil Engineering, Univ. of Waterloo, Waterloo, Ontario, Canada.
Allaby, P., Hellinga, B., and Bullock, M. (2007). “Variable speed limits: Safety and operational impacts of a candidate control strategy for freeway applications.” IEEE Trans. Intell. Transp. Syst., 8(4), 671–680.
Benekohal, R. F., Chitturi, M. V., Hajbabaie, A., Wang, M. H., and Medina, J. C. (2008). “Automated speed photo enforcement effects on speeds in work zones.” Transportation Research Record 2055, Transportation Research Board, Washington, DC, 11–20.
Cunto, F., and Saccomanno, F. (2008). “Calibration and validation of simulated vehicle safety performance at signalized intersection.” Accid. Anal. Prev., 40(3), 1171–1179.
Giles, M. J. (2004). “Driver speed compliance in western Australia: A multivariate analysis.” Transp. Policy, 11(3), 227–235.
Kwon, E., Brannan, D., Shouman, K., Isackson, C., and Arseneau, B. (2007). “Development and field evaluation of variable advisory speed limit system for work zones.” Transportation Research Record 2015, Transportation Research Board, Washington, DC, 12–18.
Lee, C., and Abdel-Aty, M. (2008). “Testing effects of warning messages and variable speed limits on driver behavior using driving simulator.” Transportation Research Record 2069, Transportation Research Board, Washington, DC, 55–64.
Lee, C., Hellinga, B., and Saccomanno, F. (2003). “Proactive freeway crash prevention using real-time traffic control.” Can. J. Civ. Eng., 30(6), 1034–1041.
McMurtry, T., Saito, M., Riffkin, M., and Heath, S. (2009) “Variable speed limit signs: Effects on speed and speed variation in work zones.” Paper No. 09-0486, Transportation Research Board Annual Meeting, Washington, DC.
Missouri DOT. (2009).“Variable speed limits on I-270 in St. Louis.” 〈http://www.modot.mo.gov/stlouis/links/VariableSpeedLimits.htm〉 (Aug. 31, 2009).
Papageorgiou, M., Kosmatopoulos, E., and Papamichail, I. (2008). “Effects of variable speed limits on motorway traffic flow.” Transportation Research Record 2047, Transportation Research Board, Washington, DC, 37–48.
Park, B., and Yadlapati, S. S. (2003). “Development and testing of variable speed limit logics at work zones using simulation.” Proc., 82nd Annual Meeting of the Transportation Research Board, Washington, DC.
Povey, L. J., Frith, W. J., and Keall, M. D. (2003). “An investigation of the relationship between speed enforcement, vehicle speeds and injury crashes in New Zealand.” Proc., Institution of Professional Engineers New Zealand (IPENZ) Transportation Group. Technical Conf. Papers 2003, IPENZ, Wellington, New Zealand.
Rodier, C. J., Shaheen, S. A., and Cavanagh, E. (2008). “Automated speed enforcement in the U.S.: A review of the literature on benefits and barriers to implementation.” Proc., 87th Annual Meeting of the Transportation Research Board, Washington, DC.
Transportation Research Board. (1998). Special report 254: Review of current practice for setting and enforcing speed limits, Committee for Guidance on Setting and Enforcing Speed Limits, National Research Council, National Academy, Washington, DC.
UK Highways Agency. (2006). “M25 controlled motorway summary report.” Highways Agency Publications Group, Bristol, UK.
Ulfarsson, G. F., Shankar, V. N., and Vu, P. (2005). “The effect of variable message and speed limit signs on mean speeds and speed deviations.” Int. J. Veh. Inf. Commun. Syst., 1(1–2), 69–87.
van den Hoogen, E. V., and Smulders, S. (1994). “Control by variable speed signs: Results of the Dutch experiment.” Proc., Int. Conf. on Road Traffic Monitoring and Control, Institution of Electrical Engineers, London, 145–149.
Washington State DOT. (2009). “I-90—Two-way transit and HOV operations—Variable speed limit signs.” 〈http://www.wsdot.wa.gov/Projects/I90/TwoWayTransit/vsl.htm〉 (July 5, 2009).
Information & Authors
Information
Published In
Copyright
© 2011 American Society of Civil Engineers.
History
Received: Jul 6, 2009
Accepted: Aug 27, 2010
Published online: Mar 15, 2011
Published in print: Apr 1, 2011
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.