Simulation-Based Analysis of Train Controls under Various Track Alignments
Publication: Journal of Transportation Engineering
Volume 136, Issue 11
Abstract
This study develops a time-driven train performance simulation (TPS) model consisting of train traction module, track alignment module, and train control module, which is applied to emulate the movement of a train, calculate energy consumption, and estimate travel time, considering various vertical track alignments and operational controls. A numerical example is given in this study to demonstrate the features of the developed TPS, such as generating time varying operational measures (e.g., the tractive effort, resistance, acceleration rate, speed, and energy consumption, etc.) and calculating energy consumption and travel time. The most energy efficient train control, or called “golden run,” associated with various track alignments, speed limits, and schedule adherence are identified, while the impact of coasting locations to travel time and energy consumption is also assessed. A sensitivity analysis is conducted, and the relationship between model parameters and control variables are discussed.
Get full access to this article
View all available purchase options and get full access to this article.
References
American Railway Engineering Association (AREA). (1981). Manual for railway engineering, AREA, Washington, D.C., 16-2-2–16-2-3.
Bernsteen, S. A., Uher, R. A., and Romualdi, J. P. (1983). “The interpretation of train rolling resistance from fundamental mechanics.” IEEE Trans. Ind. Appl., IA-19(5), 802–817.
Candee, A. H. (1940). Electrical equipment for railroad diesel motive power, Westinghouse Electric & Manufacturing Company, West Mifflin, Pa.
Chang, C. S., Chua, C. S., Quek, H. B., Xu, X. Y., and Ho, S. L. (1998). “Development of train movement simulator for analysis and optimization of railway signaling systems.” Proc., Int. Conf. on Developments in Mass Transit Systems, Vol. 453, IEEE, New York, 243–248.
Davis, W. J., Jr. (1926). “Tractive resistance of electric locomotives and cars.” Gen. Electr. Rev., 29, 685–708.
Energy Information Administration (EIA). (2007). “Average revenue per kilowatt-hour from retail sales to ultimate consumers—Estimated by sector, by state.” ⟨http://www.eia.doe.gov/cneaf/electricity/epm/table5_6_a.html⟩ (August 17, 2008).
Gordon, S. P., and Lehrer, D. G. (1998). “Coordinated train control and energy management control strategies.” Proc., 1998 ASME/IEEE Joint, IEEE, New York, 165–176.
Hay, W. W. (1982). Railroad engineering, 2nd Ed., Wiley, New York.
Hoberock, L. L. (1977). “A survey of longitudinal acceleration comfort studies in ground transportation vehicles.” ASME J. Dyn. Syst., Meas., Control, 99(2), 76–84.
Hopkins, J. B. (1975). “Railroads and the environment-estimation of fuel consumption in rail transportation volume I: Analytical model.” Rep. No. PB-244150, Federal Railroad Administration, Springfield, Va.
Hopkins, J. B., Hazel, M. E., and McGrath, T. (1978). “Railroads and the environment-estimation of fuel consumption in rail transportation volume III: Comparison of computer simulations with field measurements.” Final Rep. No. FRA-OR&D-75-74.III to U.S. Federal Railroad Administration and Rep. No. PB-288866, National Technical Information Service, Springfield, Va.
Howard, S. M., Linda, C. G., and Wong, P. J. (1983). “Review and assessment of train performance simulation models.” Transp. Res. Rec., 917, 1–6.
Jong, J. C., and Chang, S. (2005a). “Algorithms for generating train speed profiles.” J. East. Asia Soc. Transp. Stud., 6, 356–371.
Jong, J. C., and Chang, S. (2005b). “Models for estimating energy consumption of electric trains.” J. East. Asia Soc. Transp. Stud., 6, 278–291.
Julich, P. M., Martin, C. G., Brazelton, S. L., and Curtiss, D. F. (1999). “Evaluating the potential benefits of a rail traffic movement planning algorithm.” Proc., 1999 Winter simulation Conf., ACM, New York, 1181–1185.
Kim, D. N., and Schonfeld, P. M. (1997). “Benefits of dipped vertical alignments for rail transit routes.” J. Transp. Eng., 123, 20–27.
Minciardi, R., Savio, S., and Sciutto, G. (1994). “Models and tools for simulation and analysis of metrorail transit systems.” Computers in Railways IV, 1, 391–402.
Smith, M. E., Patel, P. K., Resor, R. R., and Kondapalli, S. (1990). “Benefits of the MEET/PASS planning and energy management subsystems of the advanced railroad electronics systems (ARES).” Transportation Research Forum, 30(2), 301–309.
Uher, R. A., and Disk, D. R. (1987). “A train operations computer model.” Computers in railway operations, T. K. S. Nurthy et al., Computational Mechanics Publications, Southampton, U.K., Boston.
Vuchic, V. R. (2007). Urban transit system and technology, Wiley, New York.
Yasukawa, S., Fujita, S., Hasebe, T., and Sato, K. (1987). “Development of an on-board energy saving train operation system for the shinkansen electric railcars.” Quarterly Report of Railway Technical Research Institute, 28, 2–4.
Information & Authors
Information
Published In
Copyright
© 2010 ASCE.
History
Received: May 15, 2009
Accepted: Apr 12, 2010
Published online: Apr 14, 2010
Published in print: Nov 2010
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.