Closed-Form Solutions for Bimodal Axle Load Spectra and Relative Pavement Damage Estimation
Publication: Journal of Transportation Engineering
Volume 135, Issue 12
Abstract
The mechanistic-empirical (ME) design procedures utilize axle load spectra to characterize the individual traffic loadings for a site. These loading characteristics are employed to calculate pavement response and for subsequent damage computations. Generally, these axle load distributions exhibit a bimodal shape and a combination of two continuous statistical distributions can be used to model them. In this paper, closed-form solutions are developed to estimate the parameters of the bimodal distribution from data. A combination of two normal distributions is shown to reasonably fit observed axle spectra. Since it is anticipated that the AASHTO equivalent single-axle load (ESAL) concept will continue to be used by pavement engineers even after the full adoption of ME design methods, a closed-form statistical relationship between ESALs and axle load spectra is proposed. Such a relationship will be useful in estimating a traffic level index from an axle distribution. In addition, the relationship can provide an estimate of the relative pavement damage caused by axle distributions, and be used to rank axle load spectra within a geographical region, or between regions in order to identify heavier traffic loading corridors.
Get full access to this article
View all available purchase options and get full access to this article.
References
AASHTO. (1993). AASHTO guide for design of pavement structures, AASHTO, Washington, D.C.
Asphalt Institute. (1994). Performance graded asphalt binder specification and testing, Superpave series No. 1 (SP-1), Asphalt Institute, Lexington, Ky.
Asphalt Institute. (1996). Superpave mix design, Superpave series No. 2 (SP-2), Asphalt Institute, Lexington, Ky.
Ayyub, B. M., and Richard, H. M. (2003). Probability, statistics, and reliability for engineers and scientists, Chapman & Hall, London.
Carey, W. N., Jr., and Irick, P. E. (1960). “The pavement serviceability-performance concept.” HRB Bulletin, 250, 40–58.
Deacon, J. A. (1969). “Load equivalency in flexible pavements.” Proc., Association of Asphalt Paving Technologists, Vol. 38, 465–494.
Deacon, J. A., and Deen, R. C. (1969). “Equivalent axle loads for pavement design.” Highw. Res. Rec., 291, 133–143.
Frank E. Harrell, J. (2001). Regression model strategies with applications to linear models, logistic regression, and survival analysis, Springer, New York.
Haider, S. W., and Harichandran, R. S. (2007a). “Characterizing axle load spectra by using gross vehicle weights and truck traffic volumes.” Proc., 86th Annual Meeting of Transportation Research Record (CD-ROM), Transportation Research Board, Washington, D.C.
Haider, S. W., and Harichandran, R. S. (2007b). “Quantifying the effects of truck weights on axle load spectra of single and tandem axle configurations.” Proc., 5th Int. Conf. on Maintenance and Rehabilitation of Pavements and Technological Control, ISCP, San Francisco, Calif., 73–78.
Haider, S. W., and Harichandran, R. S. (2007c). “Relating axle load spectra to truck gross vehicle weights and volumes.” J. Transp. Eng., 133(12), 696–705.
Hong, F., Pereira, F. M., and Prozzi, J. A. (2006). “Comparison of equivalent single axle loads from empirical and mechanistic-empirical approaches.” Proc., 85th Annual Meeting of Transportation Research Record (CD-ROM), Transportation Research Board, Washington, D.C.
Huang, Y. H. (1969). “Computation of equivalent single-wheel loads using layered theory.” Highw. Res. Rec., 291, 144–155.
Huang, Y. H. (2004). Pavement analysis and design, Prentice-Hall, Upper Saddle River, N.J., 07458.
Ioannides, A. M., Karanth, R. K., and Sanjeevirao, K. (1998). “Mechanistic-empirical approach to assessing relative pavement damage.” Transp. Res. Rec., 1639, 112–119.
Mohammadi, J., and Shah, N. (1992). “Statistical evaluation of truck overloads.” J. Transp. Eng., 118(5), 651–665.
National Cooperative Highway Research Program (NCHRP). (2004). “Guide for mechanistic-empirical design of new and rehabilitated pavement structures.” NCHRP Project Rep No. 1-37A, NCHRP, National Research Council, Washington, D.C.
Papoulis, A., and Pillai, S. U. (2002). Probability, random variables, and stochastic processes, McGraw-Hill, New York.
Prozzi, J. A., and Hong, F. (2007). “Effect of weigh-in-motion system measurement errors on load-pavement impact estimation.” J. Transp. Eng., 133(1), 1–10.
Prozzi, J. A., Hong, F., and Leidy, J. (2006). “Optimum statistical characterization of WIM data based on pavement impact.” Proc., 85th Annual Meeting of Transportation Research Record (CD-ROM), Transportation Research Board, Washington, D.C.
Timm, D. H., Tisdale, S. M., and Turochy, R. E. (2005). “Axle load spectra characterization by mixed distribution modeling.” J. Transp. Eng., 131(2), 83–88.
Information & Authors
Information
Published In
Journal of Transportation Engineering
Volume 135 • Issue 12 • December 2009
Pages: 974 - 983
Copyright
© 2009 ASCE.
History
Received: Oct 16, 2008
Accepted: Jun 15, 2009
Published online: Jun 18, 2009
Published in print: Dec 2009
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.